hulika

Author Topic: Drums & Hardware Care and Maintenance Thread  (Read 95032 times)

Offline shinkenshinobu

  • Regular Member
  • ***
drum repair
« Reply #150 on: November 01, 2007, 01:52:50 PM »
meron po ba kayong alam na nagre-repair ng drums(snare drums in particular)? i need to have my snare drums fixed asap.

tnx in advance
"...but be filled with the Spirit; singing and making melody in your heart to the Lord..." Ephesians 5:18 MTO Home made Drum Mics: http://talk.philmusic.com/board/index.php/topic,81477.0.html

Offline stilljey

  • Philmusicus Addictus
  • *****
Re: drum repair
« Reply #151 on: November 01, 2007, 01:58:45 PM »
ako rin, kailangan yata overhaul na itong drumset namin.

Online Akira JUMBO

  • good vibrations
  • Moderator
  • *****
Re: Drums & Hardware Care and Maintenance Thread
« Reply #152 on: November 01, 2007, 06:42:22 PM »
Posting your problem in details might help us more to direct you to certain people/facilities that can do the repair.  :wink:
DRUM.ROOM drum items for sale click here

Offline shinkenshinobu

  • Regular Member
  • ***
Re: Drums & Hardware Care and Maintenance Thread
« Reply #153 on: November 01, 2007, 08:01:10 PM »
Posting your problem in details might help us more to direct you to certain people/facilities that can do the repair.  :wink:

ah. thanks po for the advice  :-D

anyway, i think the problem is with the lugs ng snare ko. 'di kasi kumakagat yung tension rod pag tinotono ko. and right now it got worse; nag-warp na yung batter head and di na siya maayos 'coz sira nga ung lugs. i'm considering on buying a new snare drum but if pwede pa 'to mapaayos mas ok. hope you guys could help me with this. you could teach me how to fix it myself or mas ok if you could refer me to somebody na marunong talaga mag-ayos nito(baka masira ko pa lalo).

thanks in advance
"...but be filled with the Spirit; singing and making melody in your heart to the Lord..." Ephesians 5:18 MTO Home made Drum Mics: http://talk.philmusic.com/board/index.php/topic,81477.0.html

Online Akira JUMBO

  • good vibrations
  • Moderator
  • *****
Re: Drums & Hardware Care and Maintenance Thread
« Reply #154 on: November 01, 2007, 08:22:00 PM »
@shinkenshinobu

Are you referring to just 1 lug problem? If so simply replace the receiver (the small brass/metal tube inside the lug with threads which holds the rod in place) of the lug. These items are easily available at Lazer or JB music which can be found in most malls.  :wink:
DRUM.ROOM drum items for sale click here


Offline shinkenshinobu

  • Regular Member
  • ***
Re: Drums & Hardware Care and Maintenance Thread
« Reply #155 on: November 01, 2007, 08:30:07 PM »
what if it's more than one lug?
"...but be filled with the Spirit; singing and making melody in your heart to the Lord..." Ephesians 5:18 MTO Home made Drum Mics: http://talk.philmusic.com/board/index.php/topic,81477.0.html

Online Akira JUMBO

  • good vibrations
  • Moderator
  • *****
Re: Drums & Hardware Care and Maintenance Thread
« Reply #156 on: November 01, 2007, 09:29:27 PM »
what if it's more than one lug?

..buy more receivers  :wink:
DRUM.ROOM drum items for sale click here

Offline shinkenshinobu

  • Regular Member
  • ***
Re: Drums & Hardware Care and Maintenance Thread
« Reply #157 on: November 01, 2007, 09:38:21 PM »
di ko naisip yun ah  :lol:

uhh last question: so for example if i already bought some receivers do you think that a noob like me could fix it for my self or should i ask help from someone who knows how to deal with such things?
« Last Edit: November 01, 2007, 09:42:47 PM by shinkenshinobu »
"...but be filled with the Spirit; singing and making melody in your heart to the Lord..." Ephesians 5:18 MTO Home made Drum Mics: http://talk.philmusic.com/board/index.php/topic,81477.0.html

Online Akira JUMBO

  • good vibrations
  • Moderator
  • *****
Re: Drums & Hardware Care and Maintenance Thread
« Reply #158 on: November 01, 2007, 09:49:15 PM »
di ko naisip yun ah  :lol:

uhh last question: so for example if i already bought some receivers do you think that a noob like me could fix it for my self or should i ask help from someone who knows how to deal with such things?

Nah! I'm sure you can handle it, all you need is a screw driver and a drum key to remove the head.. :lol:
DRUM.ROOM drum items for sale click here

Offline shinkenshinobu

  • Regular Member
  • ***
Re: Drums & Hardware Care and Maintenance Thread
« Reply #159 on: November 01, 2007, 09:52:16 PM »
well, hope you're right sir. oh well, thanks for the advice  :-D
"...but be filled with the Spirit; singing and making melody in your heart to the Lord..." Ephesians 5:18 MTO Home made Drum Mics: http://talk.philmusic.com/board/index.php/topic,81477.0.html

Online Akira JUMBO

  • good vibrations
  • Moderator
  • *****
Re: Drums & Hardware Care and Maintenance Thread
« Reply #160 on: November 01, 2007, 09:56:23 PM »
if problem persists get back on us  :-D

good luck!
DRUM.ROOM drum items for sale click here

Offline mic2

  • Regular Member
  • ***
Re: Drums & Hardware Care and Maintenance Thread
« Reply #161 on: December 12, 2007, 01:08:23 PM »
sir tanong ko lang po paano po ba mag repaint ng drum kit? medyo luma na kasi yung kit ko gusto ko sana paayos, pa repaint ko sana meron po ba dito nakakaalam kung paano or meron po ba gumagawa nyan dito? salamat po.
HiFidelity

Offline g0d5_g1ft

  • Forum Fanatic
  • ****
Re: Drums & Hardware Care and Maintenance Thread
« Reply #162 on: December 13, 2007, 02:20:23 PM »
sir tanong ko lang po paano po ba mag repaint ng drum kit? medyo luma na kasi yung kit ko gusto ko sana paayos, pa repaint ko sana meron po ba dito nakakaalam kung paano or meron po ba gumagawa nyan dito? salamat po.

matrabaho yan bro, naconsider mo nang ire-wrap nalang?

anyway kung gusto mo tlagang irepaint yung kit mo:

1. strip mo yung wrap (kung meron) or yung current paint ng drums mo, sand paper mo para ok yung pagkastrip.
2. kung nagtanggal ka ng wrap, sand mo yung drums para maging pantay ulit yung surface nya, then sand some more para kuminis na parang pwet ng bata or:
3. lagyan mo na ng primer, mas madali ito pag sprayed primer, kasi  halos pantay na agad ito and matatakpan nya na yung hindi pagkapino ng kahoy after nung initial sandin mo. sand mo pa din kung gusto mong mas makinis pa. best ito kung colored yung ippaint mo pero kung gusto mong natural finish or stained, wag mo lagyan ng primer kasi usually puti, gray, or red ito.
4. pag makinis na yung shell at satisfied ka na sa kinis nya, may primer man o wala, saka mo na cya sprayan ng gusto mong kulay or stain. apply several coats depende sa gusto mo
5. last sprayan mo ng clear coat para may konting protection ung paint/stain layer mo, also para mas makintab, again depende sayo kung gano kadaming coats gusto mo ilagay

I hope that helped
matututo kaya ako magdrums? kelan kaya iyon...

need gear: http://talk.philmusic.com/board/viewtopic.php?t=28593

Offline dredrums

  • Philmusicus Noobitus
  • *
Re: Drums & Hardware Care and Maintenance Thread
« Reply #163 on: December 13, 2007, 08:20:53 PM »
sir tanong ko lang po paano po ba mag repaint ng drum kit? medyo luma na kasi yung kit ko gusto ko sana paayos, pa repaint ko sana meron po ba dito nakakaalam kung paano or meron po ba gumagawa nyan dito? salamat po.

You might want to use a Vinyl sticker to wrap the drums. This is available in most DIY shops like Ace Hardware and is available in LOTS of colors and finishes. Around 120 pesos for a roll (which can wrap around two toms..I think hehe) Hope this helps.  :-)
Save the trees, Don't break your sticks!

DreDRUMS

Offline rhanen28

  • Veteran Member
  • ****
Re: Drums & Hardware Care and Maintenance Thread
« Reply #164 on: December 13, 2007, 09:37:16 PM »
5. last sprayan mo ng clear coat para may konting protection ung paint/stain layer mo, also para mas makintab, again depende sayo kung gano kadaming coats gusto mo ilagay

add ko na rin after mo rin ma clear coat eh try mo na din i-buff na rin for smoothness and extra shine
Be a part of drumnation!
www.drumnation.tk!!

Offline DumDrum

  • Netizen Level
  • **
What to do with "Rusted Chrome Hardwares"???
« Reply #165 on: January 14, 2008, 11:39:15 AM »


hmm.. mga sir pa help nmn.. any suggestions na pde gawin sa mga CHROME Stands | Hoops | Lugs na kinakalawang?? hmm..

naicp ko po kc, prang hnd sila maganda tignan kung my paint..
sa side nmn po ng mga stands, mttanggal kapag ina-adjust ung height, dhl ung tube ay naiipit..

Hmm..  :|

Offline tagz

  • Regular Member
  • ***
Re: What to do with "Rusted Chrome Hardwares"???
« Reply #166 on: January 14, 2008, 12:05:14 PM »
powdercoat kaya sir? mas maganda un kesa ordinary paint..
PALOpaloPALOpaloPALOpalo!!!

Offline DumDrum

  • Netizen Level
  • **
Re: What to do with "Rusted Chrome Hardwares"???
« Reply #167 on: January 14, 2008, 08:06:45 PM »
powdercoat? hmm.. san po kaya available un??

hnd po kaya matanggal ung powdercoated na Cymbal stands for example Boomstand sa pag aadjust ng height nito??

or hnd kaya sumikip ung fittings ng tube to another collar?

Offline gerr4

  • Regular Member
  • ***
lubricating the pedals..
« Reply #168 on: April 07, 2008, 01:34:28 PM »
ano po magandang pang lubricate ng pedals? pti sa shaft ng mga double peds? pati sa i lalagay?
Praise Him with drums and dancing...Praise Him with cymbals. Praise Him with loud cymbals."- Psalms 150:4-5

Offline 9_spiral

  • Forum Fanatic
  • ****
Re: lubricating the pedals..
« Reply #169 on: April 07, 2008, 01:39:09 PM »
ok na lubricant ang wd-40 nilalagay ko sa chain drives, at dun sa screws ng shaft para fluid ang flow ng slave pedal ko. pwede rin baby oil para cheap hehe :-D

Offline drewLAKANDULA

  • Forum Fanatic
  • ****
Re: lubricating the pedals..
« Reply #170 on: April 07, 2008, 01:57:27 PM »
sakin naman...wd-40 madalas kong ginagamit eh.....ok din yun bro try mo gamitin wd-40.. :-D

Offline Tugpaktugpak

  • Veteran Member
  • ****
Re: lubricating the pedals..
« Reply #171 on: April 07, 2008, 02:06:50 PM »
Ung singer na oil...ung kulay pula...ung di sya masyadong didikitan ng alikabok...same lang din sa DW40 pero sa DW40 nangingitim pagtumatagal tska mataas ung affinity nya sa alikabok..di kagaya ng singer na oil, brushin mo lang natatanggal na di pa ngingitim ung oil......opinion lang po yan....try nyo po kung effective din sa inyo
"My grace is sufficient for you, for my power is made perfect in weakness." Therefore I will boast all the more gladly about my weaknesses, so that Christ's power may rest on me. - 2 Cor 12:9

Offline phfreq

  • Forum Fanatic
  • ****
Re: lubricating the pedals..
« Reply #172 on: April 07, 2008, 07:11:12 PM »
sabi po nila yung wd40 daw after a while gagaspang ang mga nakacontact. yun namang mga regular oils and mga grease, makalat.  Ang pinatry sa akin eh yung tri-flow lubricant aerosol.

http://www.triflowlubricants.com/Superior_Aerosol/superior_aerosol.html

sa ace hardware sa us nabili pero baka available kahit saang ace hardware... maganda sya.. malinis after pagka-apply tapos walang squeak and madulas.. highly recommended :-)


Offline marko21

  • Philmusicus Addictus
  • *****
Re: lubricating the pedals..
« Reply #173 on: April 07, 2008, 07:21:31 PM »
How much po yan?

Offline autoexec

  • Philmusicus Addictus
  • *****
Re: lubricating the pedals..
« Reply #174 on: April 08, 2008, 12:26:48 AM »
sabi po nila yung wd40 daw after a while gagaspang ang mga nakacontact. yun namang mga regular oils and mga grease, makalat.  Ang pinatry sa akin eh yung tri-flow lubricant aerosol.

http://www.triflowlubricants.com/Superior_Aerosol/superior_aerosol.html

sa ace hardware sa us nabili pero baka available kahit saang ace hardware... maganda sya.. malinis after pagka-apply tapos walang squeak and madulas.. highly recommended :-)
Astig! Matry nga yan, salamat sa info bro. :-)
...