hulika
« previous next »
Pages: [1] 2 3   Go Down

Author Topic: improvised stick holder  (Read 10480 times)

Offline peeves24

  • Philmusicus Addictus
  • *****
improvised stick holder
« on: April 03, 2007, 12:54:49 PM »
di ko makita yung dating thread about stick holders e....

pero as promised, eto na yung pic. bagong gawa ko lang pala to kagabi. medyo nahihirapan na ko mag switch from percussion mode to drum kit mode during gigs. palagi ko kasi kagat yung isang stick sa bibig para hindi maka miss ng beat habang may hawak na shaker/tamborine sa right hand.

hindi presentable yung una kong stick holder kaya gumawa ako ng mas maganda



total cost less than 180 pesos
less than 30 minutes to assemble
adjustable angle  :-D

of course, pwede pa kayo makamura kung may tira kayong pvc pipe dyan. ayoko ko na kasi maglagare pa kaya bumili na lang ako sa ace ng precut pipes at yung closed cap nya
Logged

Offline daemonite

  • Philmusicus Addictus
  • *****
Re: improvised stick holder
« Reply #1 on: April 03, 2007, 12:59:02 PM »
astig, pwede ka na bumuo ng mga improvised hardware for drums....para marami ka pangGAS tsaka pangkasal!
Logged
Drummer / Keyboardist
PrimeApes / Chuckoy Vicuņa Combo
https://soundcloud.com/daemon-keys

Offline marko21

  • Philmusicus Addictus
  • *****
Re: improvised stick holder
« Reply #2 on: April 03, 2007, 03:30:14 PM »
wow astig pano mo ginawa yan sir?
Logged

Offline peeves24

  • Philmusicus Addictus
  • *****
Re: improvised stick holder
« Reply #3 on: April 03, 2007, 03:35:51 PM »
butasan mo yung pvc
butasan mo yung clamp
turnilyo mo sila

tapus  :-D
Logged

Offline marko21

  • Philmusicus Addictus
  • *****
Re: improvised stick holder
« Reply #4 on: April 03, 2007, 03:52:13 PM »
ok tnx  :-D

pang sampay lang mga clamps dito  :-D
Logged

Offline Dindin

  • Forum Fanatic
  • ****
Re: improvised stick holder
« Reply #5 on: April 03, 2007, 04:24:09 PM »
Galing!
Logged

Offline drummer_boy17

  • Philmusicus Addictus
  • *****
Re: improvised stick holder
« Reply #6 on: April 03, 2007, 06:10:34 PM »
Quote from: peeves24 on April 03, 2007, 12:54:49 PM
di ko makita yung dating thread about stick holders e....

pero as promised, eto na yung pic. bagong gawa ko lang pala to kagabi. medyo nahihirapan na ko mag switch from percussion mode to drum kit mode during gigs. palagi ko kasi kagat yung isang stick sa bibig para hindi maka miss ng beat habang may hawak na shaker/tamborine sa right hand.

hindi presentable yung una kong stick holder kaya gumawa ako ng mas maganda



total cost less than 180 pesos
less than 30 minutes to assemble
adjustable angle  :-D

of course, pwede pa kayo makamura kung may tira kayong pvc pipe dyan. ayoko ko na kasi maglagare pa kaya bumili na lang ako sa ace ng precut pipes at yung closed cap nya

astig naman nyn!.. :)
Logged
FLY FAST PHOTOGRAPHY: Click Here

Offline lil.drummerboy

  • Philmusicus Addictus
  • *****
Re: improvised stick holder
« Reply #7 on: April 03, 2007, 07:06:19 PM »
wow!! galing naman!!!  :-o :-D :wink: :mrgreen:
Logged

Offline intake

  • Philmusicus Addictus
  • *****
Re: improvised stick holder
« Reply #8 on: April 03, 2007, 07:14:28 PM »
nice kuya pao!  :-) kesa bumili ng pro mark stick holder ganyan na lang gagawin no?  :-D

filipino ingenuity right there!
Logged
Laptop = $600
DSL = $30/month
Locked threads @ AGT sub forums = PRICELESS :D

Offline wax_static

  • Veteran Member
  • ****
Re: improvised stick holder
« Reply #9 on: April 03, 2007, 07:17:00 PM »
Macgyver :wink:

Logged

Offline MikEh

  • Philmusicus Addictus
  • *****
Re: improvised stick holder
« Reply #10 on: April 03, 2007, 07:20:23 PM »
my friend uses an empty can of pringles
Logged

Offline lil.drummerboy

  • Philmusicus Addictus
  • *****
Re: improvised stick holder
« Reply #11 on: April 03, 2007, 07:21:26 PM »
so pwede dun 2-4 na sticks? pag yang pvc na nasa picture parang isang stick lang magkakasya bawat isa eh?
Logged

Offline MikEh

  • Philmusicus Addictus
  • *****
Re: improvised stick holder
« Reply #12 on: April 03, 2007, 07:42:51 PM »
Quote from: lil.drummerboy on April 03, 2007, 07:21:26 PM
so pwede dun 2-4 na sticks? pag yang pvc na nasa picture parang isang stick lang magkakasya bawat isa eh?

yup yup. di ko lang alam kung ano tawag dun sa part na ginamit niya para ikabit yun sa set niya...
Logged

Offline lil.drummerboy

  • Philmusicus Addictus
  • *****
Re: improvised stick holder
« Reply #13 on: April 03, 2007, 07:49:59 PM »
Quote from: MikEh on April 03, 2007, 07:42:51 PM
Quote from: lil.drummerboy on April 03, 2007, 07:21:26 PM
so pwede dun 2-4 na sticks? pag yang pvc na nasa picture parang isang stick lang magkakasya bawat isa eh?

yup yup. di ko lang alam kung ano tawag dun sa part na ginamit niya para ikabit yun sa set niya...
ah ayos un ah.. pwede din naman sa pvc pero mas mataba para mas madaming stick pwede ma lagay dba.. 8-)
Logged

Offline rasta_gopz

  • Senior Member
  • ***
Re: improvised stick holder
« Reply #14 on: April 03, 2007, 08:03:54 PM »
sir san mo nabili yung materials
Logged

Offline pmack

  • Philmusicus Addictus
  • *****
Re: improvised stick holder
« Reply #15 on: April 03, 2007, 09:12:38 PM »
IBANG KLASE KA TALAGA MASTER!!!
Logged

Offline lil.drummerboy

  • Philmusicus Addictus
  • *****
Re: improvised stick holder
« Reply #16 on: April 03, 2007, 10:17:53 PM »
Quote from: rasta_gopz on April 03, 2007, 08:03:54 PM
sir san mo nabili yung materials
sa hardware cguro? :?
Logged

Offline peeves24

  • Philmusicus Addictus
  • *****
Re: improvised stick holder
« Reply #17 on: April 03, 2007, 10:54:29 PM »
ace hardware ko binili lahat. kung may pvc ka, clamp lang bibilin mo at machine screw+nut. 54 pesos lang yung clamp, nagpamahal lang yung pvc

syempre pwede rin mas malaking pvc pipe gamitin pero para sa kin ok na yan. mas gusto ko kasi na solo sticks lang para madaling damputin di tulad ng pringles can. mahihirapan ka pa kunin yung dikit dikit na stick dun e
Logged

Offline MikEh

  • Philmusicus Addictus
  • *****
Re: improvised stick holder
« Reply #18 on: April 03, 2007, 11:09:41 PM »
Quote from: peeves24 on April 03, 2007, 10:54:29 PM
ace hardware ko binili lahat. kung may pvc ka, clamp lang bibilin mo at machine screw+nut. 54 pesos lang yung clamp, nagpamahal lang yung pvc

syempre pwede rin mas malaking pvc pipe gamitin pero para sa kin ok na yan. mas gusto ko kasi na solo sticks lang para madaling damputin di tulad ng pringles can. mahihirapan ka pa kunin yung dikit dikit na stick dun e

:lol: pasensya na :-D sorry sa threadjacking :-D
Logged

Offline peeves24

  • Philmusicus Addictus
  • *****
Re: improvised stick holder
« Reply #19 on: April 03, 2007, 11:13:48 PM »
no prob dude  :-D

i was just explaining why i choose to use smaller pipes.

meron na ko nung "pringles can" style pero gawa sa pinutol na architectural tube. engineering grad kasi ako at sayang naman yung tube ko ng templates, nakatambak lang dito kaya ginawa ko na lang stick holder. anyway, di rin kasi magandang dalin sa labas yun hehehe, presentation counts  :-D
Logged

Offline MikEh

  • Philmusicus Addictus
  • *****
Re: improvised stick holder
« Reply #20 on: April 03, 2007, 11:35:34 PM »
true, true...

tubes look alot sexier than cans. :lol:
Logged

Offline Gep

  • Philmusicus Addictus
  • *****
Re: improvised stick holder
« Reply #21 on: April 03, 2007, 11:51:12 PM »
Ayos ang utak! Hehehe.
Logged

Offline rasta_gopz

  • Senior Member
  • ***
Re: improvised stick holder
« Reply #22 on: April 04, 2007, 03:34:08 PM »
Quote from: peeves24 on April 03, 2007, 10:54:29 PM
mas gusto ko kasi na solo sticks lang para madaling damputin di tulad ng pringles can. mahihirapan ka pa kunin yung dikit dikit na stick dun e

dali mo sir
itsura palang alam mo ng madali lang humugot ng stick
Logged

Offline Dindin

  • Forum Fanatic
  • ****
Re: improvised stick holder
« Reply #23 on: April 04, 2007, 03:50:14 PM »
Meron din ganyan yung Vater... Nabili namin sa Guitar Center for $9...

Pero mabigat dahil bakal yung lalagyan ng sticks...


Logged

Offline lil.drummerboy

  • Philmusicus Addictus
  • *****
Re: improvised stick holder
« Reply #24 on: April 04, 2007, 05:22:44 PM »
wow ayos parang shock absorber tignan sa malayo. hehe. :-D
Logged
Pages: [1] 2 3   Go Up
« previous next »