hulika

Author Topic: Help on damaged WAV files!  (Read 7406 times)

Offline burnsbhm

  • Philmusicus Addictus
  • *****
Help on damaged WAV files!
« on: April 18, 2018, 02:58:07 AM »
Any expert recording engineer/producer in the house? I need help regarding damaged elements/multitracks in WAV files.
RJ LP Std.,Jackson DK2,Burns Brian May,Fender MIM Strat,Valencia EClassical,Nady UHF4,EHX Screaming Bird,Vox V847,Vox V830,Vox Tonelab SE,Vox Pathfinder 15R/Visual Sound J&H,Ibanez TS9 OD,MXR Analog Chorus, Boss BF2,Boss DD2,Line 6 Echo Park

Offline Ralph_Petrucci

  • Namamasko po!
  • Philmusicus Supremus
  • ******
Re: Help on damaged WAV files!
« Reply #1 on: April 18, 2018, 09:50:34 AM »
in what way is it damaged? are we talking vocal tracks here? or an instrument track?
hahaha ako binibiyak ko muna yung wetpaks para makita kung may yellow thingy hahahaha

Offline burnsbhm

  • Philmusicus Addictus
  • *****
Re: Help on damaged WAV files!
« Reply #2 on: May 28, 2018, 08:47:12 AM »
in what way is it damaged? are we talking vocal tracks here? or an instrument track?

All the tracks on the mutlitracks have sudden spurts of noise (about a few milliseconds long) when I transferred it to a different flashdrive.
RJ LP Std.,Jackson DK2,Burns Brian May,Fender MIM Strat,Valencia EClassical,Nady UHF4,EHX Screaming Bird,Vox V847,Vox V830,Vox Tonelab SE,Vox Pathfinder 15R/Visual Sound J&H,Ibanez TS9 OD,MXR Analog Chorus, Boss BF2,Boss DD2,Line 6 Echo Park

Offline dariusbabylon

  • Forum Fanatic
  • ****
Re: Help on damaged WAV files!
« Reply #3 on: May 28, 2018, 04:44:50 PM »
Brute force method : If it's just one cycle of the waveform, you can just set the volume of that particular portion to zero. If the millisecond comprises of several cycles, it will be impossible to fix without it being noticeable.

If it was a bit or sample conversion during transfer (ie, sounds like loud static), it's almost impossible to fix. Just get a new copy of the file.

Offline Ralph_Petrucci

  • Namamasko po!
  • Philmusicus Supremus
  • ******
Re: Help on damaged WAV files!
« Reply #4 on: May 28, 2018, 07:30:53 PM »
Brute force method : If it's just one cycle of the waveform, you can just set the volume of that particular portion to zero. If the millisecond comprises of several cycles, it will be impossible to fix without it being noticeable.

If it was a bit or sample conversion during transfer (ie, sounds like loud static), it's almost impossible to fix. Just get a new copy of the file.

+1 eto na yan. and then apply a reverb to mask the sudden dead silence durng those cuts.
hahaha ako binibiyak ko muna yung wetpaks para makita kung may yellow thingy hahahaha


Offline emil_murillo

  • Philmusicus Addictus
  • *****
Re: Help on damaged WAV files!
« Reply #5 on: July 02, 2018, 07:09:46 AM »
kung instrument tracks sana mas madali patungan.. but if the part that was damaged kinda repeated like refrain or chorus.. you can just copy the part same as the damaged, using your mixing software and put it on the 2nd track.. 1st track is the whole wav file (consisting all mixed multitracks).. itapat po lang kung saan yun may damage.. expand mo lang yun waveform para mas malinaw saan itatapat.. remember to minimize the volume nun damaged part sa 1st track


Offline emil_murillo

  • Philmusicus Addictus
  • *****
Re: Help on damaged WAV files!
« Reply #6 on: July 02, 2018, 07:14:37 AM »
PS

medyo mahirap lang gawan ulit ng take (record again) if you don't want to patch it with a copy.. most especially milliseconds lang yun nadamage..

Offline emil_murillo

  • Philmusicus Addictus
  • *****
Re: Help on damaged WAV files!
« Reply #7 on: July 02, 2018, 08:39:24 AM »
let us say the damage part is the one highlighted ▼


Offline emil_murillo

  • Philmusicus Addictus
  • *****
Re: Help on damaged WAV files!
« Reply #8 on: July 02, 2018, 08:44:22 AM »
► let us say part siya ng chorus na inuulit.. say chorus siya after the 2nd verse.. look for the chorus after the 1st verse, same part dun sa na-damage.. copy it and put it on the 2nd track ▼



NOTE: → of course this is all hypothetical.. the highlighted part is not in millisecond

► now remember to minimize the volume of the damage part.. if the mixer software can do it or be able to do it

Offline emil_murillo

  • Philmusicus Addictus
  • *****
Re: Help on damaged WAV files!
« Reply #9 on: July 02, 2018, 08:46:51 AM »
► now mixcraft cannot do that.. and so if your mixer software cannot do too then all you have to do is just rip the part that is damaged then patch it on the 2nd track na lang ▼


Offline emil_murillo

  • Philmusicus Addictus
  • *****
Re: Help on damaged WAV files!
« Reply #10 on: July 02, 2018, 08:52:04 AM »
► now if you cannot find a suitable patch.. say the damage part is 100 millisecond.. copy a 50 millisecond on right and another 50 millisecond on the left and patch it on the 2nd track like this ▼



and oh musta sayo sir.. emil ito

Offline emil_murillo

  • Philmusicus Addictus
  • *****
Re: Help on damaged WAV files!
« Reply #11 on: July 02, 2018, 09:01:26 AM »
► i believe hindi na masyado pansin yun kung milliseconds lang.. wag lang void yun part na yun

► like Ralph_Petrucci said.. put on effects like reverb or delay para hindi din masyado mapansin..

God bless

Offline emil_murillo

  • Philmusicus Addictus
  • *****
Re: Help on damaged WAV files!
« Reply #12 on: July 02, 2018, 09:32:47 AM »
or if you still have the project file.. say this mix are saved as "God Be Praised.MXC"  all you have to do is render it again into MP3 or MP4.. as long as you saved it in a file like for mixcraft project it is in *.mxc file.. you can go over it again and again.. put on another track or change effects, change volume of the whole track or every instrument track.. highlight vocal track of bass track, etc.. and render it how many times you wanted.. in MP3 or MP4 or OGG or WAV file