Post your pedalboard chain routing here!

[j.nikko3123]

ay sir, the LS-2 is doing a great job, and about sa signal, wala naman akong na experience na problema, or any delay sound pag nag change ako ng lines, sulit and it is very big help for me.

Alright! thank you for that sir,I'm waiting for my LS-2 to arrive. cheers!

[Asurada666]

Alright! thank you for that sir,I'm waiting for my LS-2 to arrive. cheers!

Hahaha  good for you sir, 

but sir don't use a big L type jack like a PANCAKE Style jack when you put it to LS-2 cause it will not fit for 3 slot, it is more advisable to use LAVA or George L's or small type of jack. 

[j.nikko3123]

Hahaha  good for you sir, 

but sir don't use a big L type jack like a PANCAKE Style jack when you put it to LS-2 cause it will not fit for 3 slot, it is more advisable to use LAVA or George L's or small type of jack.

Ok sir thank you for the head's up!

my chain will be -> Polytune -> Cry Baby gcb95f -> comp 66 -> mxr 10 band EQ -> Mxr Smart Gate -> J & H -> DLS MKIII -> Megalith Delta -> Mxr Smart Gate -> LS-2 (with zoom g5 on loop A) -> Ekko 616 Dark -> Hall of Fame

[kune_km]

Guitars: Strat & LP > ABY Switcher (Guitar Switcher) > Dunlop GCB95 Wah > Mooer Green Mile > MV Shredhead > AMT DT2 > Boss Ch1 > Digitech Digidelay > Zoom G3X > Amp

[avatar]

Added two new stuff on the board this week and removed the unnecessary ones...trying to keep it small and simple (but still multi-purpose)

                                                                                                    | MS70-CDR          |
Guitar-->Super Crunchbox-->Transparent OD-->Boost 'N Buff-->  Bypass Loop      -->  BBE Sonic Stomp --> Amp 
                                                                                                    | Flashback Delay | 

[ninevoltrhythm]

Added two new stuff on the board this week and removed the unnecessary ones...trying to keep it small and simple (but still multi-purpose)

                                                                                                    | MS70-CDR          |
Guitar-->Super Crunchbox-->Transparent OD-->Boost 'N Buff-->  Bypass Loop      -->  BBE Sonic Stomp --> Amp 
                                                                                                    | Flashback Delay |

akin na ang unnecessary ones. 

[avatar]

  swap to ditto?

[avatar]

swap to ditto?

[arkeetar]

Setup ko last weekend/mini board:
57ri strat>ts9>bd2 stock >dzound > antala delay > reverb pedal > amp

[ziggy stardust]

Guitar--> Wah--> OD--> Dirt--> Chorus--> Delay--> Amp

That's it!... for now 

[cheddar]

Since gumagamit ako ng AMT Preamps, heto ang setup ng chain ko. Ayos ang pre-amps ng AMT, pwede syang regualar distortion, pre-amp para sa effects loop, at may emulated cab out derecho sa mixer/PA system.  Sa mga may preamps, hope this helps.

off topic sir. san po kayo nka bili ng amt pedal? gisto ko sana bumili ng R1 e.

[alvinjohnasignar]

Guitar>Boss TU2>Boston Noise Gate>Nux OD>Shredhead>Artec Eq>Mooer Ana echo>amp
  

[soundhole8]

Here's mine:

Guitar > Boss PH-2 > Maxon OD9 > MV Shredhead > Boss DD-20 > Zoom MS70CDR> Amp

Simpleng gear lang...but works for me.
 

[Garner]

Now:

Les Paul > Polytune > SD1 > OD3 > Joyo British > DD20 > TC HOF > DI box

Question: Where do I put EP booster for (always on pedal) tone shaping and Pure boost for solo boost?

Thanks guys!

[shoegaze geezer]

Now:

Les Paul > Polytune > SD1 > OD3 > Joyo British > DD20 > TC HOF > DI box

Question: Where do I put EP booster for (always on pedal) tone shaping and Pure boost for solo boost?

Thanks guys!

i'm not sure if it will work for you but if i am to decide...i will put it after the joyo and before the dd20

[walanakamingyelo]

Napagod nako sa dami ng pedal dati kaya eto na lang sakin ngayon hehe


Guitar > DIY Dual Fuzz > SH > JOYO UD > EQ > Amp

Simple is better ika nga... 

[gandydancer123]

Napagod nako sa dami ng pedal dati kaya eto na lang sakin ngayon hehe


Guitar > DIY Dual Fuzz > SH > JOYO UD > EQ > Amp

Simple is better ika nga... 

^this!

baka in the end zoom g3 nalang din and a dirt pedal matira sakin..haha

[walanakamingyelo]

^this!

baka in the end zoom g3 nalang din and a dirt pedal matira sakin..haha

Hahaha dati kasi syempre gusto mo parang ang angas pag sobrang dami ng pedals saka yung mga tao pagtitinginan talaga pag andami kaya lang bilang player ang hirap naman tapakan kahit pa sabihin nating ginagamit mo lahat. Pinakahassle pa dyan eh ang pagbubuhat lalo na pag wala kang auto haha... Eh kung may pera lang para sa amp na maganda kahit wala nang pedal pedal eh tuner na lang laban na!

[gandydancer123]

Hahaha dati kasi syempre gusto mo parang ang angas pag sobrang dami ng pedals saka yung mga tao pagtitinginan talaga pag andami kaya lang bilang player ang hirap naman tapakan kahit pa sabihin nating ginagamit mo lahat. Pinakahassle pa dyan eh ang pagbubuhat lalo na pag wala kang auto haha... Eh kung may pera lang para sa amp na maganda kahit wala nang pedal pedal eh tuner na lang laban na!

Pinakahassle pa dyan eh ang pagbubuhat lalo na pag wala kang auto haha.

eto for me...hahaha thrill is gone nadin..nagsawa nadin sa wakas..siguro the occassional purchase once in a while..pero hindi tulad ng dati..parang gusto mo acquire lahat ng klaseng tunog..haha
ok nadin..

[walanakamingyelo]

eto for me...hahaha thrill is gone nadin..nagsawa nadin sa wakas..siguro the occassional purchase once in a while..pero hindi tulad ng dati..parang gusto mo acquire lahat ng klaseng tunog..haha
ok nadin..

Mismo men... kahit nga gumawa ngayon ng pedal minsan nakakatamad na eh dahil sa trabaho... kaya andaming pending na projects di na nagagawa hahaha   

[fretzburner]

Ako din pa liit ng paliit na.
Gtr-DIY 3n1 pedal (RCbooster/Pinnacle/Volume/DBDelay)-MS50g(FXloop ng 3n1)-Cabsim(xlr/PLjack)

Although may bigger board pa din, itong small board lang pinag abalahan ngayun.

[halo88]

Guitar>Ibanez TS9>Boss SD2>BOSS DC-2>Ibanez DE7>Amp

[joancolar]

ano maganda unahin? compressor o noise gate?

compressor>noise gate>overdrive>distortion>equalizer

or

noise gate>compressor>overdrive>distoriton>equalizer

thanks!

[walanakamingyelo]

ano maganda unahin? compressor o noise gate?

compressor>noise gate>overdrive>distortion>equalizer

or

noise gate>compressor>overdrive>distoriton>equalizer

thanks!

Kung active p-ups sir at mejo matapang na sa p-up pa lang I'd say noise gate muna. pero kung passive naman, I suggest scratch the noise gate then go with
comp> od > dist > EQ o kaya naman pwede, Comp > OD > Dist > NG > EQ pero still, personally speaking I'd rather not put a noise gate on my chain.

[joancolar]

Kung active p-ups sir at mejo matapang na sa p-up pa lang I'd say noise gate muna. pero kung passive naman, I suggest scratch the noise gate then go with
comp> od > dist > EQ o kaya naman pwede, Comp > OD > Dist > NG > EQ pero still, personally speaking I'd rather not put a noise gate on my chain.

thanks sir!
ittry ko walang noise gate. baka kasi sobra ingay pag nagsma comp, dist at od..