TALK @ PhilMusic.com - The Online Home of the Pinoy Musician

The Musician Forums => Pinoydrums => Topic started by: vhinming on March 03, 2010, 09:30:06 PM

Title: DIY: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: vhinming on March 03, 2010, 09:30:06 PM
Mga sir, mas ok po ang belt drive para sa akin, hehehe,

kasi mas magaan ang feeling at mabilis ang response hehe,

dati pong double chain ang pedals ko, and parang ambigat ng feeling,

kaya instead of buying new double pedal belt drive , i made my own belt drive (literally) hehe

share ko lang po sainyo..

Feedback ko for my work:

☺mas gumaan ang feeling
☺mas bumilis yung peds response about 30% faster (feel ko lang hehe)  :-D
☺mas masarap sa mata tingnan hehe
☺iwas gastos, laking tipid


materials needed:
♦same thread Longer screw (4 pieces for Double Pedal) (2 pieces for Single Pedal)
♦1/4 inch washers fit sa screws (8 pcs for DP) (4pcs for SP)
♦(Nylon Strap can be found on ID straps"Recommended")
or an Ordinary Belt ["NON STRETCHABLE"(hatakin muna para matest)]
♦Sharp Scissor
♦Philip Screw + or -

Procedure:

♠remove screw sa magkabilang dulo ng chain,

♠sukatin yung haba at gumipit ng belt na exact size ng chain (tip: wag itira yung gitna, gumupit lang sa kabilang side, para may matirang may tahi sa belt)

♠butasan sa exact center ng imaginary square sa end ng belt (wag gumamit ng puncher, dapat screw lang, para masiksik padin pag higpit mamaya)

♠put washer sa magkabilang side ng butas ng belt, then screw (kailangan fit na fit , na kakailanganin pa i screw para pumasok)

♠do it in other side, then sa isang belt same procedure (kung may slave peds)

(tip ilagay yung ginupitan na side sa side na protected)

♠assemble it all

♠then presto, you now using belt driven pedal hehe!!

☺i hope it Helps ^_^  :-D  :-)


(http://i430.photobucket.com/albums/qq24/ming_sep/DSC00161.jpg)
Before:
(http://i430.photobucket.com/albums/qq24/ming_sep/DSC00130.jpg)
(http://i430.photobucket.com/albums/qq24/ming_sep/DSC00076.jpg)
After Working on it..
(http://i430.photobucket.com/albums/qq24/ming_sep/DSC00155.jpg)
(http://i430.photobucket.com/albums/qq24/ming_sep/DSC00153.jpg)


Good Day Po  :lol: !!!
Title: Re: Converting Pedal: Chain Drive to Belt Drive (a successful Experiment)
Post by: peeves24 on March 03, 2010, 09:50:10 PM
nice project  :-D
Title: Re: Converting Pedal: Chain Drive to Belt Drive (a successful Experiment)
Post by: vhinming on March 03, 2010, 09:52:07 PM
Quote from: peeves24 on March 03, 2010, 09:50:10 PM
nice project  :-D
ow tama ka sir, mas ok ang term na project kaysa experiment hehe
thanks po ^^,
ganito lang po talaga nagtitipid heheheheh
Title: Re: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: marko21 on March 03, 2010, 10:00:59 PM
Mukang oks ah, pede pa-try?  :-D

Ganda ng beater mo sir ah, pearl ba yan?
Title: Re: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: vhinming on March 03, 2010, 10:14:04 PM
Quote from: marko21 on March 03, 2010, 10:00:59 PM
Mukang oks ah, pede pa-try?  :-D

Ganda ng beater mo sir ah, pearl ba yan?

pwedeng pwede sir hehe, welcome po kau d2 hehe

uhm di po ehehe imitation lang po ito hehe
Title: Re: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: pmack on March 04, 2010, 12:47:15 AM
ok ah!
subukan ko rin... pa-kopya sa idea.
Title: Re: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: kasmoteer on March 04, 2010, 12:47:33 AM
talagang literal na BELT drive :p
Title: Re: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: Riff_6603 on March 04, 2010, 02:10:09 AM
looking forward to more of your DIY posts.. ok lahat bro! cheers! :wink:
Title: Re: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: eLdanpot on March 04, 2010, 10:45:43 AM
nice vhin! padaan ako dyan sa inyo pag ubra sa time natin. hehe!
Title: Re: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: cheezemonster08 on March 04, 2010, 10:52:57 AM
nice DIY belt drive pedal bro!
 :evil:
Title: Re: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: drummaniac on March 04, 2010, 11:13:49 AM
Quote from: vhinming on March 03, 2010, 09:30:06 PM
Mga sir, mas ok po ang belt drive para sa akin, hehehe,

kasi mas magaan ang feeling at mabilis ang response hehe,

dati pong double chain ang pedals ko, and parang ambigat ng feeling,

kaya instead of buying new double pedal belt drive , i made my own belt drive (literally) hehe

share ko lang po sainyo..

Feedback ko for my work:

☺mas gumaan ang feeling
☺mas bumilis yung peds response about 30% faster (feel ko lang hehe)  :-D
☺mas masarap sa mata tingnan hehe
☺iwas gastos, laking tipid


materials needed:
♦same thread Longer screw (4 pieces for Double Pedal) (2 pieces for Single Pedal)
♦1/4 inch washers fit sa screws (8 pcs for DP) (4pcs for SP)
♦Ordinary Belt ["NON STRETCHABLE"(hatakin muna para matest)]
♦Sharp Scissor
♦Philip Screw + or -

Procedure:

♠remove screw sa magkabilang dulo ng chain,

♠sukatin yung haba at gumipit ng belt na exact size ng chain (tip: wag itira yung gitna, gumupit lang sa kabilang side, para may matirang may tahi sa belt)

♠butasan sa exact center ng imaginary square sa end ng belt (wag gumamit ng puncher, dapat screw lang, para masiksik padin pag higpit mamaya)

♠put washer sa magkabilang side ng butas ng belt, then screw (kailangan fit na fit , na kakailanganin pa i screw para pumasok)

♠do it in other side, then sa isang belt same procedure (kung may slave peds)

(tip ilagay yung ginupitan na side sa side na protected)

♠assemble it all

♠then presto, you now using belt driven pedal hehe!!

☺i hope it Helps ^_^  :-D  :-)


(http://i430.photobucket.com/albums/qq24/ming_sep/DSC00161.jpg)
Before:
(http://i430.photobucket.com/albums/qq24/ming_sep/DSC00130.jpg)
(http://i430.photobucket.com/albums/qq24/ming_sep/DSC00076.jpg)
After Working on it..
(http://i430.photobucket.com/albums/qq24/ming_sep/DSC00155.jpg)
(http://i430.photobucket.com/albums/qq24/ming_sep/DSC00153.jpg)


Good Day Po  :lol: !!!

Ayus to ah..so, pwede din siguro ang nylon strap??
Title: Re: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: curry on March 04, 2010, 10:51:43 PM
I like et!! :-D
Title: Re: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: Mayuri-sama on March 05, 2010, 01:36:18 PM
nice mr. improvise! may sumusunod na naman sa mga yapak ni sir peeves
Title: Re: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: drumachine on March 06, 2010, 10:50:37 AM
pwede kaya baller ID? hehe. galing tol! anung material ng belt mo tol?
Title: Re: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: Mayuri-sama on March 06, 2010, 11:16:18 AM
though i doubt the durability of that belt...even the toughest leathers loses their strength after years of use, in your belts case it will be battered often because of the pulling action of the footboard

cguro kung genuine louis vuitton leather ang gagamitin jan e mas tatagal pa yan  :-D
Title: Re: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: ChocoMani on March 06, 2010, 09:18:42 PM
nice bro.creative :mrgreen:
Title: Re: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: paeng16 on March 06, 2010, 09:38:50 PM
Ayus to ah... Next step is converting that to a direct-drive.... (TORNO-MODE na dude!!)  :-D
Title: Re: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: irajames on March 07, 2010, 02:35:23 AM
wow man. ups for you! gagawin ko rin to! pareho tayo ng double peds and bumibigay na yung sakin! hahaha yeah!
Title: Re: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: breech41 on March 08, 2010, 03:13:58 PM
naisip kong gawing yung sa mga id lanyards kaso nd pa kasi ako nkapag try ng belt drive .. pwera na lang sa flexi glide kong IC..pero syempre iba kasi yung cam.. mas mabilis ba talaga pag belt drive ?
Title: Re: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: drumachine on March 08, 2010, 07:32:00 PM
Quote from: Mayuri-sama on March 06, 2010, 11:16:18 AM
though i doubt the durability of that belt...even the toughest leathers loses their strength after years of use, in your belts case it will be battered often because of the pulling action of the footboard

cguro kung genuine louis vuitton leather ang gagamitin jan e mas tatagal pa yan  :-D

i agree. ok siguro kung gawa tayo kevlar belt...  :evil:
Title: Re: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: vhinming on March 08, 2010, 07:56:46 PM
yah

@sir Riff geh po hehe,
sabi ni sir paeng hehe plano ko na po hehe!

@kuya eldan hehe sige po jam po tayo dito hehehe


@sir mayuri at now po good working padin sya

@sir drumachine bale parang concept palang naman po, i improve ko pa =)
Title: Re: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: busog on March 09, 2010, 11:00:05 PM
Galing! nice DIY!  :-D
Title: Re: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: vhinming on March 10, 2010, 02:28:53 AM
preparing for DIY Direct Drive  :-D

i hope maging successful hehe  :-D
Title: Re: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: irajames on March 10, 2010, 02:40:14 AM
Quote from: vhinming on March 10, 2010, 02:28:53 AM
preparing for DIY Direct Drive  :-D

i hope maging successful hehe  :-D
awesome! keep us posted  :-D
Title: Re: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: vhinming on March 10, 2010, 02:52:13 AM
Quote from: irajames on March 10, 2010, 02:40:14 AM
awesome! keep us posted  :-D

hehe masyado nga po risky, hehe kasi ang balak ko is ipatorno o ako mismo ang mag LALAGARE ng "cam" ba yun? hehe yung curved shaped para mas lumayo yung "throw off" sorry kung mali mali yung words hehe, pero isa lang hiling ko,

sana wag pumalpak hehe!  :-D

Update ko po kayo agad sa result ^_^
Title: Re: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: killikillers on March 10, 2010, 09:05:22 AM
Quote from: vhinming on March 10, 2010, 02:52:13 AM
hehe masyado nga po risky, hehe kasi ang balak ko is ipatorno o ako mismo ang mag LALAGARE ng "cam" ba yun? hehe yung curved shaped para mas lumayo yung "throw off" sorry kung mali mali yung words hehe, pero isa lang hiling ko,

sana wag pumalpak hehe!  :-D

Update ko po kayo agad sa result ^_^

nakoh pag nagawa mo yan tol, pwede mo pagkakitaan yan para hindi masayang yung efforts mo sa pag trial-and-error

pwede ka gumawa ng " Converting your normal chain drive double pedals to super cool direct drive double pedals "
business  :lol:
Title: Re: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: vhinming on March 10, 2010, 01:06:12 PM
Quote from: killikillers on March 10, 2010, 09:05:22 AM
nakoh pag nagawa mo yan tol, pwede mo pagkakitaan yan para hindi masayang yung efforts mo sa pag trial-and-error

pwede ka gumawa ng " Converting your normal chain drive double pedals to super cool direct drive double pedals "
business  :lol:

nako sir sana nga maging matino ang finish hehe, ahm sisimulan ko sya after finals na, binabagyo ng requirements ehh hehe  :-D
Title: Re: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: killikillers on March 10, 2010, 01:13:01 PM
Quote from: vhinming on March 10, 2010, 01:06:12 PM
nako sir sana nga maging matino ang finish hehe, ahm sisimulan ko sya after finals na, binabagyo ng requirements ehh hehe  :-D

hahaha

gudluck sayo sir...

ang pag aaral talaga nakakasira ng pag dr-drums  :lol:
Title: Re: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: kimpoy19 on March 11, 2010, 08:37:33 PM
wow. simple but awsome.  :-)
try ko yan sir.  :-) hanks a lot.
Title: Re: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: tyrande101 on March 11, 2010, 11:08:25 PM
up
Title: Re: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: eminem15 on March 14, 2010, 04:04:45 PM
mukang mas matibay pa sa chain? haha. nice. thats what we call GENIUS. dba. haha

UP UP.
Title: Re: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: vhinming on March 14, 2010, 08:10:52 PM
Quote from: eminem15 on March 14, 2010, 04:04:45 PM
mukang mas matibay pa sa chain? haha. nice. thats what we call GENIUS. dba. haha

UP UP.

di naman siguro sir hehe, metal yung chain ehh hehehe,

ok na ok po basta wag kayo magkakamali sa pag pili ng Belt ^_^
Title: Re: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: allhailkingkollias on March 16, 2010, 11:52:23 PM
astig pimp your pedal!!!
Title: Re: DIY: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: Kumag on June 20, 2010, 11:04:08 AM
Quote from: vhinming on March 03, 2010, 09:30:06 PM
Mga sir, mas ok po ang belt drive para sa akin, hehehe,

kasi mas magaan ang feeling at mabilis ang response hehe,

dati pong double chain ang pedals ko, and parang ambigat ng feeling,

kaya instead of buying new double pedal belt drive , i made my own belt drive (literally) hehe

share ko lang po sainyo..

Feedback ko for my work:

☺mas gumaan ang feeling
☺mas bumilis yung peds response about 30% faster (feel ko lang hehe)  :-D
☺mas masarap sa mata tingnan hehe
☺iwas gastos, laking tipid


materials needed:
♦same thread Longer screw (4 pieces for Double Pedal) (2 pieces for Single Pedal)
♦1/4 inch washers fit sa screws (8 pcs for DP) (4pcs for SP)
♦Ordinary Belt ["NON STRETCHABLE"(hatakin muna para matest)]
♦Sharp Scissor
♦Philip Screw + or -

Procedure:

♠remove screw sa magkabilang dulo ng chain,

♠sukatin yung haba at gumipit ng belt na exact size ng chain (tip: wag itira yung gitna, gumupit lang sa kabilang side, para may matirang may tahi sa belt)

♠butasan sa exact center ng imaginary square sa end ng belt (wag gumamit ng puncher, dapat screw lang, para masiksik padin pag higpit mamaya)

♠put washer sa magkabilang side ng butas ng belt, then screw (kailangan fit na fit , na kakailanganin pa i screw para pumasok)

♠do it in other side, then sa isang belt same procedure (kung may slave peds)

(tip ilagay yung ginupitan na side sa side na protected)

♠assemble it all

♠then presto, you now using belt driven pedal hehe!!

☺i hope it Helps ^_^  :-D  :-)


(http://i430.photobucket.com/albums/qq24/ming_sep/DSC00161.jpg)
Before:
(http://i430.photobucket.com/albums/qq24/ming_sep/DSC00130.jpg)
(http://i430.photobucket.com/albums/qq24/ming_sep/DSC00076.jpg)
After Working on it..
(http://i430.photobucket.com/albums/qq24/ming_sep/DSC00155.jpg)
(http://i430.photobucket.com/albums/qq24/ming_sep/DSC00153.jpg)


Good Day Po  :lol: !!!
sir regarding sa nagawa mo eh is it durable balak ko baklasin ko na yung akin chain eh pero single chain xa Generic pedal lang naman hehehe...
Title: Re: DIY: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: jhayphay on June 20, 2010, 12:05:18 PM
very nice idea pards! ang wild niyang ginawa mo! :-)
Title: Re: DIY: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: vhinming on June 30, 2010, 05:54:54 PM
Quote from: Kumag on June 20, 2010, 11:04:08 AM
sir regarding sa nagawa mo eh is it durable balak ko [pichapie] ko na yung akin chain eh pero single chain xa Generic pedal lang naman hehehe...


not that sir,.. i recomend po na nylon belt ang gamitin  :wink:
Title: Re: DIY: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: francisnuega on September 16, 2010, 09:47:31 AM
sir try ko ah!!! thanks for sharing, it really helps!!!
Title: Re: DIY: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: vhinming on September 17, 2010, 01:08:55 AM
Quote from: francisnuega on September 16, 2010, 09:47:31 AM
sir try ko ah!!! thanks for sharing, it really helps!!!

your welcome po sir  :lol:

remember to use "nylon" belts hehe
Title: Re: DIY: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: francisnuega on September 23, 2010, 04:36:38 PM
Quote from: vhinming on September 17, 2010, 01:08:55 AM
your welcome po sir  :lol:

remember to use "nylon" belts hehe

so sir pwede ko po gamitin I.D. straps or yung straps ng mga medal? mas ok po ba yun? thanks!
Title: Re: DIY: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: vhinming on September 23, 2010, 05:13:51 PM
Quote from: francisnuega on September 23, 2010, 04:36:38 PM
so sir pwede ko po gamitin I.D. straps or yung straps ng mga medal? mas ok po ba yun? thanks!
basta po non stretchable and durable, it will do the job  :wink:
also dapat may edging
Title: Re: DIY: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: francisnuega on September 23, 2010, 07:22:32 PM
SIR I'VE DONE IT!!! IT'S SOOOOO COOL!!! gumamit po ako ng I.D. sttrp, and yes, ang gaan ng feel!!!

thanks so much for sharing this idea sir!!! :-D :-D :-D
Title: Re: DIY: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: vhinming on September 23, 2010, 07:25:50 PM
Quote from: francisnuega on September 23, 2010, 07:22:32 PM
SIR I'VE DONE IT!!! IT'S SOOOOO COOL!!! gumamit po ako ng I.D. sttrp, and yes, ang gaan ng feel!!!

thanks so much for sharing this idea sir!!! :-D :-D :-D

congratulations sir!
good to see that reply sir,
thanks for trusting my idea  :wink:

pics pics pics!! hehe
Title: Re: DIY: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: francisnuega on September 23, 2010, 07:57:43 PM
Quote from: vhinming on September 23, 2010, 07:25:50 PM
congratulations sir!
good to see that reply sir,
thanks for trusting my idea  :wink:

pics pics pics!! hehe

sige sige sir mag uupload ako ng pics hehe! thanks ulit!
Title: Re: DIY: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: pedaldeaf3 on September 28, 2010, 10:28:04 AM
Sir, ayos tong idea mo ah... Ang maluphet dun... PAREHO TAYO NG PEDALS!!!
Badtrip lang... crack na yung kabitan ko ng beater at yung beaters wala na...
Bigay lang kase sakin eh... puro kalawang na pero... Libre eh... syang naman...
any idea kung pano ko yun ma-re-restore???
nakaka-inspire naman na pareho tayo ng pedals...
\m/,  :-D .\m/
Title: Re: DIY: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: vhinming on September 28, 2010, 03:08:00 PM
Quote from: pedaldeaf3 on September 28, 2010, 10:28:04 AM
Sir, ayos tong idea mo ah... Ang maluphet dun... PAREHO TAYO NG PEDALS!!!
Badtrip lang... crack na yung kabitan ko ng beater at yung beaters wala na...
Bigay lang kase sakin eh... puro kalawang na pero... Libre eh... syang naman...
any idea kung pano ko yun ma-re-restore???
nakaka-inspire naman na pareho tayo ng pedals...
\m/,  :-D .\m/

thanks dude  :-)

ahm mahirap na makakita ng parts pag ganyang situation, pero ma pagasa pa, yung mga co drummers natin dito na may scrap parts  :wink:
Title: Re: DIY: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: magg0t on October 03, 2010, 04:01:01 PM
galing galing :)
Title: Re: DIY: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: pedaldeaf3 on October 04, 2010, 03:52:05 PM
Sir Vhin, kamusta na yung next pedal project mo???
Any progress???
 :-D
Title: Re: DIY: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: jommel on October 04, 2010, 05:19:35 PM
eh kung yung mga nylon type na belts kaya pwede? hehehehe
Title: Re: DIY: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: vhinming on October 05, 2010, 04:26:04 PM
@ sir pedaldeaf3: wala pa po pedal to experiment with ehh  :|

@ sir jommel: much recomended po  :wink:
Title: Re: DIY: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: pedaldeaf3 on October 06, 2010, 12:33:52 PM
Quote from: vhinming on October 05, 2010, 04:26:04 PM
@ sir pedaldeaf3: wala pa po pedal to experiment with ehh  :|

@ sir jommel: much recomended po  :wink:

Sir Vhin...
kausapin ko yung leader namin sa church if pwede ko benta yung pedals...
hiram ko lang kase sa church namin yun eh... hehehe....
Title: Re: DIY: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: ishen006 on October 13, 2010, 12:33:56 PM
pano kya pag strap drive to chain drive?  :-)
Title: Re: DIY: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: vhinming on October 13, 2010, 06:55:50 PM
Quote from: ishen006 on October 13, 2010, 12:33:56 PM
pano kya pag strap drive to chain drive?  :-)


maybe bili po kayo ng spare chain ^^,

mejo mahirap po kasi mag DIY nun  :-)
Title: Re: DIY: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: electrecute on January 14, 2011, 11:19:14 PM
hindi po ba kaya iconvert ung single chain na pedal?

or yung pwede sana magimprove sa response ng single chain pedal thanks po ^^
Title: Re: DIY: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: gestoni on January 15, 2011, 06:41:46 AM
galing sir...astigas! paalam lang ako sir...pwede ko bang gayahin?
Title: Re: DIY: Converting Pedal: Chain Drive to Belt Drive (a successful Project)
Post by: rommeltan on February 12, 2014, 10:58:06 AM
Very nice sir @vhinming

Pa try din po. I will also post pics of my finished proj.  :)

 Thanks. God Bless!