TALK @ PhilMusic.com - The Online Home of the Pinoy Musician

The Musician Forums => Pinoydrums => Topic started by: Akira JUMBO on September 02, 2006, 01:32:07 AM

Title: Hardware Finishes thread
Post by: Akira JUMBO on September 02, 2006, 01:32:07 AM: any comments on black hardware like the Pearl EX series?

prone ba to chipping or damages?

thanks! :wink:
Title: Black hardware
Post by: drumster on September 03, 2006, 02:21:30 AM: The Pearl drums with the black rims and lugs look well-plated. I'm not sure though with long-term usage.
Title: Chrome hardware vs. Black Hardware
Post by: pinoymusika on September 13, 2006, 09:19:12 AM: I've always liked the look of black - and the kits that use black hardware look cooler and more modern to me than the ones that use traditional chrome. But are they practical? Is chrome more durable? Will black hardware tend to scratch more? Expert advice would be appreciated!

(http://jimayson.com/banners/misc/pearl-black.jpg)
Title: Chrome hardware vs. Black Hardware
Post by: peeves24 on September 13, 2006, 09:27:06 AM: depende sir kung anong drums. by colored hardware you mean powder coated.

kung yamaha/premier yan, mas maganda ang chrome plating nila kesa powder coating. pero kung cheap drums, mas maganda mag powder coat kesa chrome.

durable din ang powder coat, drums ko 1 year na yung powder coated and hindi pa rin nag chip yung rims kahit panay rimshot ako. while yung home made snare ko na yung hoops binili sa lazer e may signs of rust na.
Title: Chrome hardware vs. Black Hardware
Post by: pinoymusika on September 13, 2006, 09:33:51 AM: Quote from: peeves24

kung yamaha/premier yan, mas maganda ang chrome plating nila kesa powder coating. pero kung cheap drums, mas maganda mag powder coat kesa chrome.

What about Pearl?
Title: Chrome hardware vs. Black Hardware
Post by: peeves24 on September 13, 2006, 09:37:54 AM: ^^^ sirit, no comment :D
Title: Chrome hardware vs. Black Hardware
Post by: inigo on September 13, 2006, 12:01:21 PM: IMO, if the hardware design is a bit plain, mas maganda siya pag black. Pag maraming fancy-shmancy, mga shapes and stuff, chrome.

Good about chrome is, hindi siya namimili ng color. Black doesn't look good in some colors chrome looks good on.

I like black. Sana may black stands din, hehe.
Title: Chrome hardware vs. Black Hardware
Post by: pinoymusika on September 13, 2006, 12:40:15 PM: Quote from: inigo

I like black. Sana may black stands din, hehe.

Well black does have a certain sex appeal, hehe
http://www.pearldrum.com/05snares/UCA-1450B-lrg.jpg
Title: Chrome hardware vs. Black Hardware
Post by: inigo on September 13, 2006, 12:57:48 PM: Quote from: pinoymusika
Quote from: inigo

I like black. Sana may black stands din, hehe.

Well black does have a certain sex appeal, hehe
http://www.pearldrum.com/05snares/UCA-1450B-lrg.jpg

I definitely felt sex in that pic. Definitely. :shock:
Title: Chrome hardware vs. Black Hardware
Post by: pinoymusika on September 13, 2006, 02:00:21 PM: Black cymbal stands!

(http://www.mycustomdrum.com/ProductImages/phattie_drums_image.jpg)
Title: Chrome hardware vs. Black Hardware
Post by: peeves24 on September 13, 2006, 02:33:23 PM: you can have black cymbal stands for cheaper than you think. just buy a regular stand or use or old one and bring it to a powder coater (like versa in mandaluyong). my guesstimate is about less than 100 bucks per stand
Title: Chrome hardware vs. Black Hardware
Post by: inigo on September 13, 2006, 03:12:32 PM: @ pinoymusika... Those black stands look evil.

OT: @ peeves... can shops like Versa "restore" hardware?
Title: Chrome hardware vs. Black Hardware
Post by: marko21 on September 13, 2006, 08:50:51 PM: OT: may alam po ba kayong nagpopowder coat sa Q.C. area? :lol:
Title: Chrome hardware vs. Black Hardware
Post by: peeves24 on September 13, 2006, 08:55:20 PM: Quote from: inigo
@ pinoymusika... Those black stands look evil.

OT: @ peeves... can shops like Versa "restore" hardware?

what do you mean restore?

fix? i dont know. recondition? probably
Title: Chrome hardware vs. Black Hardware
Post by: peeves24 on September 13, 2006, 08:55:51 PM: Quote from: marko21
OT: may alam po ba kayong nagpopowder coat sa Q.C. area? :lol:

republic powder coating sa balintawak
Title: Chrome hardware vs. Black Hardware
Post by: marko21 on September 13, 2006, 08:58:52 PM: Quote from: peeves24
Quote from: marko21
OT: may alam po ba kayong nagpopowder coat sa Q.C. area? :lol:

republic powder coating sa balintawak
mga magkano po kaya don?
Title: Chrome hardware vs. Black Hardware
Post by: peeves24 on September 13, 2006, 09:19:51 PM: ^^^ di ko alam, sa versa lang ako nagpapagawa e
Title: Chrome hardware vs. Black Hardware
Post by: autoexec on September 14, 2006, 12:21:00 AM: @peeves
saan banda sa mandaluyong yun?
Title: Chrome hardware vs. Black Hardware
Post by: drumster on September 14, 2006, 05:16:24 AM: Black hardware looks cool, though I agree that they do need to match with certain colors or finishes.

Some drum manufacturers have high-quality, durable powder-coated finishes. Pearl's black hardware are well-finished. The Gretsch Vinnie Colaiuta Signature kit in 19 East (http://www.19east.com/) has black hoops and lugs. Sadly, it already has some chips and scratches.

Personally, I prefer chrome hardware. I love how it shines under the stage lights, it looks more elegant, and it never goes out of style. And it seems easier to color-match or coordinate other drums and components that one often adds or replaces, such as steel timbales and snare drums (especially when one has the habit of switching different snare drum models).

If ever I'll have a drumkit with black hardware, I want the rest of the hardware (stands, tripods, rack tubes & components, etc.) to be in black too; not just the drums. I'm that obsessive-compulsive hehe! 8)
Title: Chrome hardware vs. Black Hardware
Post by: pmack on September 14, 2006, 10:26:06 AM: i'm intrigued.
i might be able to whiz by balintawak.
sana madali makita yung powdercoating place.
may cheap fernando piccolo ako try ko ipa-powdercoat ng black yung hardware.
pwede bang ibang kulay ang ipa-powdercoat?
o black lang ang available?
para mas quirky sana.
hehehehehe.
Title: Chrome hardware vs. Black Hardware
Post by: peeves24 on September 14, 2006, 11:08:10 AM: ^^^ there's a sample color palette if you drop by their office

versa only does 1 color per day, if you happen to choose a color that's not currently on their oven, you will have to wait (for days) until there is a batch to be done.

i dont know about republic if they only do one color per day.

versa metal industries
189 haig st., daang bakal, mandaluyong
tel. no. 5316267

for addresses and contact info, check the original search engine

YELLOW PAGES

look under powder coating. lets be real, local companies still rely on this old technology and you can get more info than on google :D
Title: Chrome hardware vs. Black Hardware
Post by: peeves24 on September 14, 2006, 11:10:37 AM: Quote from: autoexec
@peeves
saan banda sa mandaluyong yun?

big warehouse, left side, 2nd street along kalentong going san juan. start counting from the intersection of kalentong and shaw (yung may jollibee at greenwich sa mga kanto)
Title: Chrome hardware vs. Black Hardware
Post by: jun_BALARAW on September 15, 2006, 05:24:31 PM: guys! check niyo 2ng kit ko... pininturahan ko ng black na pilox.. pero talagang nababakbak siya eh.. so mukang trip ko yang powder coating na sinasabi ninyo
(http://photos.friendster.com/photos/22/27/6057222/32288675523455l.jpg)
Title: Chrome hardware vs. Black Hardware
Post by: marko21 on September 15, 2006, 05:30:48 PM: pede bang ipa-powder coat ang rims at lugs? hindi ba sisikip o magfoform ng buong paint dun sa lugs?
Title: Chrome hardware vs. Black Hardware
Post by: peeves24 on September 15, 2006, 08:59:29 PM: ^^^ why not?

(http://www.raketship.com/drumblog/PC110042.jpg)

white hoops and lugs are powder coated :D
Title: Chrome hardware vs. Black Hardware
Post by: marko21 on September 15, 2006, 09:01:47 PM: Quote from: peeves24
^^^ why not?

(http://www.raketship.com/drumblog/PC110042.jpg)

white hoops and lugs are powder coated :D
wow.. eh ung shell (shell nga ba yun?) ng drums?
Title: Chrome hardware vs. Black Hardware
Post by: peeves24 on September 15, 2006, 09:05:38 PM: ^^^ spray painted ng flourescent pink at white

black maya yung drums ko dati, b a d i n g na b a d i n g na sya ngayon!
Title: Chrome hardware vs. Black Hardware
Post by: Akira JUMBO on October 11, 2006, 01:48:04 AM: may naka punta na ba sa Republic Powdercoating sa Balintawak? :oops:
Title: Chrome hardware vs. Black Hardware
Post by: zound_tech on October 11, 2006, 10:56:19 AM: kailangan ba yan ipagawa o pwde ikaw na mismo gagawa?
puro kalawang na yung akin eh,
lilihahin ko pa?
Title: Chrome hardware vs. Black Hardware
Post by: peeves24 on October 11, 2006, 11:20:34 AM: ^^^ bago mo dalin dun, lihahin mo na yung kalawang. gawin mo smooth as possible kasi pag nasa kanila na yan, pupunasan lang nila tapos salang na agad sa oven. magkakabubbles yung coat kung may kalawang yan
Title: Chrome hardware vs. Black Hardware
Post by: jun_BALARAW on October 11, 2006, 11:27:11 AM: san ba eksakto sa balintawak yang powder coating na yan? along edsa lang ba yan?? paki sabi naman para mapuntahan ko naman. thanks
Title: san po ung nagpapowder coat?
Post by: killuaxp on November 05, 2006, 03:11:26 AM: mga tsong san ba ung nagpapowercoat ng snare?i saw a thread about it but cant find anymore. hihi! :-D tsaka ano ba diff ng powdercoat sa ordinary paint mga tsong? di ko kasi alam eh. ty! :-D
Title: Re: san po ung nagpapowder coat?
Post by: drummerboy827 on November 05, 2006, 02:04:14 PM: I think its a special kind of paint or whatever. it is supposed to be rough.
Title: Re: san po ung nagpapowder coat?
Post by: pmack on November 05, 2006, 02:20:49 PM: wait mo lang si sir peeves.
siya ang idol ko sa mga ganyang bagay eh.
:D
Title: Re: san po ung nagpapowder coat?
Post by: Agent_So on November 05, 2006, 02:25:11 PM: mga sir kung may alam rin kayo near cavite... gusto ko pa powder coat mga stand ng cymbals ko.. bagay kaya puro itim?? hehehe. kalawangin na kasi yung crome.. para less maintenace....
Title: Re: san po ung nagpapowder coat?
Post by: drumster on November 05, 2006, 09:26:14 PM: You can check out these Pinoydrums threads which discusses/ed powder coating...

Chrome Hardware vs. Black Hardware
http://talk.philmusic.com/board/index.php/topic,25224.0.html

san po nakakabili ng paint for drums?
http://talk.philmusic.com/board/index.php/topic,28283.0.html

Lets see those sets! (sticky topic)
http://talk.philmusic.com/board/index.php/topic,17360.0.html

8-)
Title: Re: san po ung nagpapowder coat?
Post by: eisenworx on December 05, 2006, 10:17:51 PM: sir hanapin mo sa directory un republic powdercoating co. i think may 5 outlet cla, paranaque, caloocan 2 s q.c at meron din sa pampangga choose n lang kung san malapit, ok dun sobrang durable un mga coating nila khit s chrome plated pero pang metal, alloy lng un
Title: Re: san po ung nagpapowder coat?
Post by: killuaxp on December 06, 2006, 01:47:25 AM: uy salamat men! balak ko pa naman papowder coat yung hardware ko :lol:
Title: Re: san po ung nagpapowder coat?
Post by: BiliBidboy on December 06, 2006, 10:03:34 AM: ser, san po exact location ng republic sa paranaque? i heard its sumwer in sucat...does anybody know? thanks :-D
Title: Re: san po ung nagpapowder coat?
Post by: peeves24 on December 06, 2006, 10:10:31 AM: Quote from: pmack on November 05, 2006, 02:20:49 PM
wait mo lang si sir peeves.
siya ang idol ko sa mga ganyang bagay eh.
:D

demn, i missed this thread, didnt even knew it existed

your best source of info for powder coating is the YELLOW PAGES yes its old and out dated but it does contain address and phone numbers that you cant find on the net. that's a guarantee
Title: Re: Hardware Finishes thread
Post by: fouljan on May 26, 2007, 12:55:44 PM: etu... powder coat din yung mga hoops.... dun din sa versa... tip din ni sir peeves.. hehe..

(http://i74.photobucket.com/albums/i263/fouljan/IMG_2138.jpg)
Title: Re: Hardware Finishes thread
Post by: royalletones on May 26, 2007, 03:58:55 PM: mga Sir, san kayo sa quezon city nagpa-poweder coating? exact address and tel# please. thanks
Title: Re: Hardware Finishes thread
Post by: behave_blue on May 27, 2007, 09:04:39 PM: saan nga sa sucat yung republic powdercaoting? salamat :-D
Title: Re: Hardware Finishes thread
Post by: acousticpro on May 28, 2007, 01:34:15 AM: question lang po regarding powder coating.
hindi ba sya madali mag chip off lalo na sa snare
pag nag ririmshots?

or kung mag katamaan yun mga toms while nag seset-up, very rare namana mangyari
pero hindi maiwasan minsan na magkabangga yun mga rims lalo na pag ligpitan na.
Title: Re: Hardware Finishes thread
Post by: Akira JUMBO on May 28, 2007, 01:59:47 AM: Quote from: acousticpro on May 28, 2007, 01:34:15 AM
question lang po regarding powder coating.
hindi ba sya madali mag chip off lalo na sa snare
pag nag ririmshots?

or kung mag katamaan yun mga toms while nag seset-up, very rare namana mangyari
pero hindi maiwasan minsan na magkabangga yun mga rims lalo na pag ligpitan na.

Powder coating does not chip off that easily..especially the factory made one by the drum companys (like Pearl's black hardwares)..that is why they are widely used for that reason..but they still do have a limit.. :lol:
Title: Re: Hardware Finishes thread
Post by: peeves24 on May 28, 2007, 07:57:44 AM: Quote from: royalletones on May 26, 2007, 03:58:55 PM
mga Sir, san kayo sa quezon city nagpa-poweder coating? exact address and tel# please. thanks
Quote from: behave_blue on May 27, 2007, 09:04:39 PM
saan nga sa sucat yung republic powdercaoting? salamat :-D

check the yellow pages (hindi google, yung book na makapal sa tabi ng telepono nyo)

or eyp.com.ph

Quote from: acousticpro on May 28, 2007, 01:34:15 AM
question lang po regarding powder coating.
hindi ba sya madali mag chip off lalo na sa snare
pag nag ririmshots?

or kung mag katamaan yun mga toms while nag seset-up, very rare namana mangyari
pero hindi maiwasan minsan na magkabangga yun mga rims lalo na pag ligpitan na.

nope. wala pang nagchip off sa mga snare/tom hoops ko for almost 2 years na pero may mga blemish syempre
Title: Re: Hardware Finishes thread
Post by: wax_static on May 28, 2007, 08:38:21 AM: baka makatulong ito mga sir... :-P

from EYP...

COLOURS COATING INCORPORATED
116 Sauyo Road 1100 Quezon City
9300251
Primary Category: Powder Coatings



DYSON SURFACE COATING CORPORATION
14 Golden Road Caloocan Industrial Subd. Caybiga1400 Caloocan
9374016
Primary Category: Powder Coatings
Inquire by email · Inquire by fax ·



ICON METAL INDUSTRIES
576 Katarungan Street Plain View 1550 Mandaluyong
5328434
Primary Category: Powder Coatings
Inquire by email · View Map



PHILCO METAL PHILIPPINES INCORPORATED
147 Santo Domingo Street 1100 Quezon City
3638797
Primary Category: Powder Coatings
Inquire by email · Inquire by fax ·



VERSA POWDER COATING, INCORPORATED
189 Haig Street Barangay Daang Bakal 1550 Mandaluyong
5316273
Primary Category: Powder Coatings
Inquire by email ·

REPUBLIC POWDERCOAT CORPORATION
90 Congressional Avenue 1100 Quezon City
9263609
Primary Category: Powder Coating-Contractors
Title: Re: Hardware Finishes thread
Post by: behave_blue on May 28, 2007, 11:19:16 AM: thanks po sir waxstatic for the detailed info :-D
Title: Re: Hardware Finishes thread
Post by: acousticpro on May 29, 2007, 11:55:03 PM: Quote from: Akira JUMBO on May 28, 2007, 01:59:47 AM
Quote from: acousticpro on May 28, 2007, 01:34:15 AM
question lang po regarding powder coating.
hindi ba sya madali mag chip off lalo na sa snare
pag nag ririmshots?

or kung mag katamaan yun mga toms while nag seset-up, very rare namana mangyari
pero hindi maiwasan minsan na magkabangga yun mga rims lalo na pag ligpitan na.

Powder coating does not chip off that easily..especially the factory made one by the drum companys (like Pearl's black hardwares)..that is why they are widely used for that reason..but they still do have a limit.. :lol:

one more thing, plan ko ipa powder coat yun mga luma kong hoops pero not that old. may rust na in some parts but not that bad kaya i sprayed it with pylox chrome finish but walang kwenta ang kinalabasan. parang silver paint lang.

question. before ko dalin sa powder coating shop kelangan ko bang tanggalin yun silver with the use of paint remover?
and pano naman yun lumang chrome plate? kakapit ba ng mabuti yun powder coat?

thanks po.
Title: Re: Hardware Finishes thread
Post by: peeves24 on May 30, 2007, 08:39:52 AM: strip mo muna yung silver paint mo

tapos lihahin mo ng makinis yung hoop. punasan mo ng maigi para malinis na malinis bago mo dalin sa powder coat

kakapit na yun ng ganun
Title: How/What will i use to repaint my rusty LUGS and HOOPS?HELP
Post by: cavsdieagram on June 23, 2007, 01:19:59 AM: I'm planning to repaint my rusty lugs and hoops pero naisip ko baka magbitak bitak
kapag napapalo, lalong sumagwa ung itchura...tulong nmn po mga pro's
What will i do?... tnx
Title: Re: How/What will i use to repaint my rusty LUGS and HOOPS?HELP
Post by: Akira JUMBO on June 23, 2007, 03:00:39 AM: clean it very well then read the powdercoating thread here..search mo nalang bro.. :lol:

all instructions and info of where to have them coated is there..

and in case you would ask..powdercoated materials does not chip of that easily.. :wink:
Title: Re: How/What will i use to repaint my rusty LUGS and HOOPS?HELP
Post by: cavsdieagram on June 23, 2007, 03:11:04 AM: wow!!! :-D tnx a lot sir...
Title: Re: Hardware Finishes thread
Post by: wax_static on June 24, 2007, 02:16:05 PM: ito po sample mga sirs... hehehe

(http://i17.photobucket.com/albums/b88/wax_static/24-06-07_1212.jpg)
(http://i17.photobucket.com/albums/b88/wax_static/24-06-07_1211.jpg)
(http://i17.photobucket.com/albums/b88/wax_static/24-06-07_1210.jpg)
(http://i17.photobucket.com/albums/b88/wax_static/24-06-07_1209.jpg)
(http://i17.photobucket.com/albums/b88/wax_static/24-06-07_1234.jpg)

hoops, lugs, tom holders, tom arms and bass drum spurs lang po ang pina powder coat ko...
total of 900 petot lang... sulit na sulit... hehehe
Title: Chrome
Post by: zach lucero on October 23, 2007, 12:52:20 PM: sorry kung may gantung thread na, pa lock na lang kung meron...
san ba ok magpachrome ng hardware? medyo may butlig na yung ibang hoops ko and i want to have it redone....

*I just merged your chrome-related thread with this good old Hardware Finishes thread.

- Pinoydrums Moderator
Title: Re: Chrome
Post by: bugoy on October 23, 2007, 02:08:55 PM: sa mga talyer at machine shop dito samin nag cho chrome sila, yung friend ko pina chrome niya yung mga hardware ng guitar niya including the tuners, tuner covers, screws and whole tremolo system, saddles, control plate ng fender mustang niya, 700 pesos ang siningil sa kanya for everything, not sure lang sa mga talyer at machine shops sa ibang area.

si peeves at sandy yata may alam na nag specialize talaga for that task
Title: Re: Chrome
Post by: peeves24 on October 23, 2007, 02:12:59 PM: mahal sa chrome dazzler sa p.tuazon (sa opposite side ng edsa coming from araneta) pero quality talaga ang gawa nila

zach, sa sucat merong mga shops dun na nag tutubog. malapit sa evacom di ko lang alam kung magkano. nadadaanan ko lang sila
Title: Re: hELP: Chroming services....
Post by: paulknk on October 25, 2007, 10:45:00 PM: sir sa chrome dazzler try nyo or sa espana beside pares house.hindi ko pa na try dun pero nagtanong nko dati mejo namahalan lang ako.
Title: Re: hELP: Chroming services....
Post by: vdonati_fan on October 25, 2007, 11:52:38 PM: kakatanong ko lang sa Chrome Dazzler...wow! expensive pala magpachrome...

yung isang rim/hoop nasa P600 ang isa...per piece ang singil pa nila...ang isang lug nasa P60-P80.

but they say that Chrome Dazzler is the best in the chroming business...

it's along P.Tuazon, Cubao....from north going to south, turn right on P.Tuazon(take the Cubao "ibabaw" route). then just look for the shop, i'm not sure of the exact address.

HTH.
Title: Re: Hardware Finishes thread
Post by: zach lucero on October 28, 2007, 10:49:42 AM: ayun! found it! sige thanks guys! will check out your recomendations :D
Title: chrome finished? sino na try na dito? _ _ _ _ _ _ _
Post by: royalletones on October 30, 2007, 02:03:03 PM: sinong natry na magpa chrome ng drum items dito -> Chrome Dazzler Enterprises sa P. Tuazon Cubao?

ok ba quality? pricing specially sa mga stands.

FYI. meron din silang powder coating service dito

post some pics naman.

tnx
Title: 1
Post by: behave_blue on November 05, 2007, 10:53:59 PM: @tagz

bro paano inaapply ang woodstain?? whahaha sorry medyo noob po ako sa ganyan bagay eh...tips naman po :-D salamat
Title: powder coated cymbal,snare & hi-hat stands
Post by: bolshoi on November 05, 2007, 11:37:06 PM: meron na bang stands na hindi chrome plated?
pa-chrome ko sana old stands ko but after the estimate,
whoa!! ang mahal ng abutin.
ano ba difference ng chroming ng CHROME DAZZLER and
yun ibang nagchrome? sobrang mahal sa Dazzler but sa iba
laking mura.
ipa-powder coat ko nalang tuloy. :-D

where can find painted/powder coated stands?
tignan ko muna bago ko gawin sa stands ko. :-) :-)

thanks :mrgreen:
Title: 1
Post by: tagz on November 07, 2007, 06:45:47 PM: behave_blue:
1. tanggalin mo wraps at mga hardware..
2. lihain mo.. dapat mawala ung pandikit ng wraps na tinanggal mo..
ginamit ko 2 liha, ung 1 magaspang, tpos pag kontento ka na ung smooth
na liha naman hangang kuminis..
3. punasan mo pra wala na alikabok b4 i-apply woodstain..
4. apply woodstain, gamit ka na lng ng cloth (pwede din brief) hehe
5. patuyuin mo tpos lihain mo ulit ng konti ( ung smooth) pra kuminis..
6. repeat 4 and 5 hangang makuha mo ung trip mong kulay..

matrabaho to bro.. mas maganda kung my sander ka pra hindi mano mano.. :-D
Title: Hoops and harwares..
Post by: oliver_soh on December 28, 2007, 09:14:38 PM: Tips naman po gusto ko kasi maging black or gold ung hoops and lugs nung snare ko, ano ba dapat kong gawin para maging possible ung ganun? or talagang nabibili ung ganun na color na?

parang ganito sana trip ko na color ng hardware ng snare ko e..

(http://i237.photobucket.com/albums/ff160/xhail_material/6x14bub.jpg)

tips naman po mga sir :-D
Title: Re: Hardware Finishes thread
Post by: tagz on December 29, 2007, 08:08:55 AM: alam ko bro may nabibili na black.. pwede mo rin ipa-powdercoat yan.. :-D
Title: Re: Hardware Finishes thread
Post by: oliver_soh on December 29, 2007, 10:56:12 AM: Quote from: tagz on December 29, 2007, 08:08:55 AM
alam ko bro may nabibili na black.. pwede mo rin ipa-powdercoat yan.. :-D

oo nga daw e, mga magkano kaya magastos ko kung buong hardware ng drums ko pa powdercoat ko?(ex: ung regular 5 pcs. including the lugs,hoops, tension rods) nd na kasama ung mga stands..

at sir pede rin kaya na ako mismong pipili ng color na gagamitin?mas mahal kaya ung ganun?
Title: Re: Hardware Finishes thread
Post by: tagz on December 29, 2007, 05:42:05 PM: hmm.. cguro mga 1.5k.. may thread na ganun dito ah?? about powdercoating, kung san meron at kung magkano inaabot.. basta alam ko mura lng powdercoat.. :-D
Title: Re: Hardware Finishes thread
Post by: tagz on December 29, 2007, 05:45:41 PM: bro eto link ng thread na sinasabi ko..

http://talk.philmusic.com/board/index.php/topic,28283.0.html

kaw na bahala maghanap jn.. hehe.. :wink:
Title: Re: Hardware Finishes thread
Post by: oliver_soh on December 29, 2007, 11:08:48 PM: Quote from: tagz on December 29, 2007, 05:45:41 PM
bro eto link ng thread na sinasabi ko..

http://talk.philmusic.com/board/index.php/topic,28283.0.html

kaw na bahala maghanap jn.. hehe.. :wink:

Bro salamat sa tips lakeng tulong nito.. salamat talaga :-D
Title: Re: Hardware Finishes thread
Post by: tagz on December 30, 2007, 11:22:41 AM: welcome bro.. :wink:
Title: help. looking for a good chroming shop.
Post by: stick on October 12, 2009, 11:51:26 AM: some of my snare parts need chroming. i really haven't tried this. maybe you can suggest a shop na quality ang paggawa? yung tipong mareretain yung hubog ng mga bakal especially the lugs. i live in cainta sirs so ok kahit q.c. areas. salamat po sa time. :-)
Title: Re: help. looking for a good chroming shop.
Post by: pidro1964 on October 12, 2009, 11:58:12 AM: Sir,
chrome dazzler- (not sure if it's d or p. tuazon. )- same supplier of jett water heater. near farmers market but you have to cross edsa.

gbtabora
Title: Re: help. looking for a good chroming shop.
Post by: unnailed on October 12, 2009, 12:03:25 PM: san po malapit yun?
Title: Re: help. looking for a good chroming shop.
Post by: stick on October 12, 2009, 12:44:01 PM: Quote from: unnailed on October 12, 2009, 12:03:25 PM
san po malapit yun?

Uy. ikaw din ata sir gusto magpa chrome. :-) malapit sa araneta center. magandang landmark would be alimal. if you know p. tuazon sa cubao, try taking that route until you reach edsa, pag kita mo na edsa, go straight lang para tatagos ka dun sa other side. :-)

Sir pidro, thanks sa suggestion. sige try ko na nga talaga doon. panay kasi ata malalaking pa-chrome ineentertain nila like machineries, mags etc. kasi ang laki nung facility eh. ako tamang wala pa atang 5 kilos ang papa-chrome ko. hehe.
Title: Re: help. looking for a good chroming shop.
Post by: unnailed on October 12, 2009, 01:01:43 PM: malapit sa araneta? ano name ng store?
Title: Re: help. looking for a good chroming shop.
Post by: royalletones on October 12, 2009, 01:07:54 PM: mdyo mahal lang magpa chrome. nag inquire na ako dati. halos pambili mo na ng hardware yung pagpapachrome.

last resort if ever. go for powder coating
Title: Re: help. looking for a good chroming shop.
Post by: stick on October 12, 2009, 07:09:43 PM: Quote from: royalletones on October 12, 2009, 01:07:54 PM
mdyo mahal lang magpa chrome. nag inquire na ako dati. halos pambili mo na ng hardware yung pagpapachrome.

last resort if ever. go for powder coating

kasing mahal ng hardware? i hope hindi kasing mahal ng DDrive yun. hehe. joke lang bro. pero thanks sa "warning". :-D sa powder coating naman, mahirap for my snare kasi tendency maiiwanang chrome yung snare strainer. i also don't like the effect pag yung screws chrome/silver padin yung kulay. :-)
how do you like that 18" floor tom pala bro? :-D
Title: hoops / rims paint job
Post by: brownbread on November 12, 2013, 07:40:03 PM: may nakapag try na po ba mag pa-paint ng hoops/rims nila?
balita?

sobrang kalawang na kasi ng generic drums ko
eh yoko naman benta then bili ng bago no budget eh
dalin ko na lang sa car paint shop?

sa tingin nyo po :-D
Title: Re: Hardware Finishes thread
Post by: harugrugrug on November 13, 2013, 10:58:51 PM: help naman pa ba to sa liha?
meron pa dyan na ganyang version pero palobo na may rust yung hoops,
kaya ba ito ng sandblasting? or liha power na lang?kasi sisimulan ko na ito,malapit na dumating spare parts ko na iba via vinci at bibili na din akong heads.

(http://3.bp.blogspot.com/-ZegZyglUKO8/UoOR6s_NeXI/AAAAAAAAAUY/nkHTkkNdnmQ/s1600/006.jpg)
(http://1.bp.blogspot.com/-UQfzy9x5hVE/UoOR6brvBgI/AAAAAAAAAUU/ib5B-iEw-bE/s1600/007.jpg)
(http://2.bp.blogspot.com/-GIi7LtaGrfs/UoOR53QquPI/AAAAAAAAAUQ/TD1_W--rV6s/s1600/008.jpg)
salamat!
Title: Re: hoops / rims paint job
Post by: kimpoy19 on November 26, 2013, 10:12:43 PM: Quote from: brownbread on November 12, 2013, 07:40:03 PM
may nakapag try na po ba mag pa-paint ng hoops/rims nila?
balita?

sobrang kalawang na kasi ng generic drums ko
eh yoko naman benta then bili ng bago no budget eh
dalin ko na lang sa car paint shop?

sa tingin nyo po :-D

may kilala ako nagrestore ng snare. Even the tension rodsw and hops ay narestore nya.

Binabad niya daw sa oxalic yung lahat ng hardwares niya and then nung nawala na yung kalawang, nagpowdercoating na siya. Until now eh maganda parin yung snare niya. :)
Title: Helo naman mga drummer dyan
Post by: katak00 on December 06, 2013, 02:24:09 PM: :mrgreen: patulong naman ano pedeng pampintura sa 6611db avenger II..puru gasgas na kasi nakakatakot kasi baka hindi bumagay yung kulay..
Title: Re: Helo naman mga drummer dyan
Post by: Riff_6603 on December 06, 2013, 08:02:23 PM: Quote from: katak00 on December 06, 2013, 02:24:09 PM
:mrgreen: patulong naman ano pedeng pampintura sa 6611db avenger II..puru gasgas na kasi nakakatakot kasi baka hindi bumagay yung kulay..

powdercoating is the best way to do it. iwas lang sa moving parts.
Title: Re: Hardware Finishes thread
Post by: katak00 on December 06, 2013, 09:10:23 PM: san po nkakabili nun?
Title: Re: Hardware Finishes thread
Post by: Riff_6603 on December 06, 2013, 09:32:19 PM: Quote from: katak00 on December 06, 2013, 09:10:23 PM
san po nkakabili nun?

actually, service based ang powdercoating. ito yung address kung somewhere near EDSA yung madali for you.

Quote from: peeves24 on October 16, 2006, 11:08:05 AM
(http://photos1.blogger.com/blogger/5679/1555/400/fs5.jpg)

:D :D :D :D :D

dont paint, powder coat is the way!

for the nth time eto yung address :

versa metal industries
189 haig st., daang bakal, mandaluyong
tel. no. 5316267

just go to kalentong (may jolibe at grinwich sa kanto) going to san juan, turn left at the second street from shaw.