hulika

Author Topic: Help on USB guitar link clone (China), detection & sound problem  (Read 14635 times)

Offline bulog

  • Veteran Member
  • ****
Good day Sir,

Can I have your help on how to solve my problem.

I recently bought a China (Behringer clone) USB guitar link, & Im having problems sa detection & sound nito.

Im running it on a Windows 7 PC, using both Reaper & Audacity.

First thing I did was to install the driver (Behringer USB guitar link driver).  After installation, nag reboot ako.

Then install ko yung Guitar Rig 5 Pro. After installation, try ko muna yung Guitar Rig Pro program standalone...walang sound & di ma detect yung usb link.  Punta ako sa preference, then checked ko yung input na Behringer link.  Then nagka sound sya but parang naka PITCHSHIFTER yung tunog, doble sya.

Then try ko Audacity, detected nya yung guitar link butpag push ko na record button wala raw input. 

Sa Reaper naman nung ganun din, di ko pa load yung GUitar RIg na VST e yung raw sound nya parang naka PITCH SHIFTER....doble tunog. 

Ano po kaya problem nito?

Siguro mga 10 times ko na uninstall-install yung drivers, pati Reaper at Audacity uninstalled at install ko na rin pero no luck e.

Pls help....I've contacted na nga pala yung seller & willing naman po i-replace ng unit.

Sa unit po ba problem ko or sa settings?

thanks po sa tulong

BTW pati po pala yung Samson Meteor mic ko naapektuhan at parang nagloloko na rin po.....hay.... :-(

Offline skin

  • Philmusicus Addictus
  • *****
Re: Help on USB guitar link clone (China), detection & sound problem
« Reply #1 on: March 03, 2014, 10:51:36 AM »
Install asio4all drivers.

Don't plug the mic when using the usb guitar link.

Offline bulog

  • Veteran Member
  • ****
Re: Help on USB guitar link clone (China), detection & sound problem
« Reply #2 on: March 03, 2014, 11:17:56 AM »
Install asio4all drivers.

Don't plug the mic when using the usb guitar link.

Hi Sir Skin, ok will try the Asio4all driver.

DO I need to uninstall the Behringer driver?

Yung Samson po after ko na ma unistall nung drivers, di po nagsabay nakasaksak Sir.

So Sir driver lang po kaya problem nito?


Offline Ralph_Petrucci

  • Namamasko po!
  • Philmusicus Supremus
  • ******
Re: Help on USB guitar link clone (China), detection & sound problem
« Reply #3 on: March 03, 2014, 01:48:58 PM »
Hi Sir Skin, ok will try the Asio4all driver.

DO I need to uninstall the Behringer driver?

Yung Samson po after ko na ma unistall nung drivers, di po nagsabay nakasaksak Sir.

So Sir driver lang po kaya problem nito?




ASIO4ALL lang katapat niyan brother. Tapos proper settings.

Kailangan mo ma prin yung driver para madetect ni windows yung device.
hahaha ako binibiyak ko muna yung wetpaks para makita kung may yellow thingy hahahaha

Offline bulog

  • Veteran Member
  • ****
Re: Help on USB guitar link clone (China), detection & sound problem
« Reply #4 on: March 10, 2014, 09:16:42 AM »
Its been almost 2 weeks since I bought this usb device, and 2nd unit na ito, kasi pinapalitan ko e.

And still di ko pa rin sya mapagana  ng maayos.

Ive installed the driver plus the ASIO4all but still a failure

Pag ASIO4all na gamit ko di nya ma-detect na may nakakabit sa input ng guitar link.  Pag gamit ko naman yung Behringer driver AYUN!!  double pa rin naririnig ko, na parang naka pitch shifter na octave down ang tunog.

Suko na ako...bebenta ko na lang ito hehe!!!

BTW, nagformat na rin ako ng PC, tingin ko di compatible sa Windows 7 Ultimate edition yung usb guitar link na ito


Offline skin

  • Philmusicus Addictus
  • *****
Re: Help on USB guitar link clone (China), detection & sound problem
« Reply #5 on: March 10, 2014, 10:56:35 AM »
Sa tingin ko mali lang procedure mo.

Offline bulog

  • Veteran Member
  • ****
Re: Help on USB guitar link clone (China), detection & sound problem
« Reply #6 on: March 10, 2014, 11:21:45 AM »
Sa tingin ko mali lang procedure mo.

Yun nga rin po Sir iniisip ko e.

ganito po ginawa ko



1. nag re-format po ako ng PC, Windows 7 ultimate edition (including na all internal softwares)

2. Install ko po yung Reaper (default driver nya muna e yung sound card ko)

3. Install ko po yung USB driver, na hindi nakakabit yung guitar link. Nung sinabi na nya na i-connect na daw yung guitar link, so ikinabit ko na po sya sa dedicated usb port na di ko ginagamit, kasi nabasa ko na kapag dun na-install yung guitar link driver e yun lang daw po pwede gamitin na usb port for the guitar link.

4. After that install ko naman po yung ASIO4all driver

5. then configure ko na po yung audio driver nung comp ko, sa control panel/sounds. naka indicate naman po yung output is yung usb link, pati yung recording sa usb link din.

6. Pasok naman po ako ng Reaper to set the driver....
     - Pag select ko po yung ASIO4all....walang nakikitang input, output lang po.  I've tried unplugging the usb guitar link & plugged it back again but di po talaga ma detect.

    - Pag select ko naman po yung behringer usb guitar driver...may input sya but yun nga po double sound nung guitar ko.

7. Nung pinasok ko po yung ASIO4all na setup or icon, may parang icon na cross indicating na parang wala po syang ma-detect na usb guitar link device na nakakabit.

San po kaya ako nagkamali Sir Skin?


Offline skin

  • Philmusicus Addictus
  • *****
Re: Help on USB guitar link clone (China), detection & sound problem
« Reply #7 on: March 10, 2014, 01:13:07 PM »
Disable mo na lang sa device manager yung isang audio interface mo para malinis.

Offline denden009

  • Forum Fanatic
  • ****
Re: Help on USB guitar link clone (China), detection & sound problem
« Reply #8 on: April 04, 2014, 12:10:31 AM »
Parang ganyan nangyari sakin dati eh. Ininstall ko sa yung Guitar link w/ the Behringer drivers sa laptop tas di siya ma detect sa kahit anong install/uninstall ko(both behringer drivers at yung USB narin mismo) Ang ginawa ko, plinug ko sa desktop yung Guitar Link without installing the Behringer drivers, ayun gumana na. Nagamit ko na siya sa dalawang DAW ko (FL and Reaper)

Di ko narin hinabol yung mga effects at amp sims sa Guitar Rig(may kasama siyang CD neto if I'm not mistaken), ang ginawa ko nalang nag download nalang ako ng amp sims at mga impulses.

Offline zeph

  • Forum Fanatic
  • ****
Re: Help on USB guitar link clone (China), detection & sound problem
« Reply #9 on: April 29, 2014, 02:00:24 PM »
balak kong bumili neto mamaya sana hindi ako magkaproblema katulad ng ganyan

anyway nasubukan mo na ba sa ibang PC T.S?

Offline zeph

  • Forum Fanatic
  • ****
Re: Help on USB guitar link clone (China), detection & sound problem
« Reply #10 on: April 30, 2014, 03:18:10 PM »
try mo disable lahat ng sound devices mo maliban sa USB guitar link mo gagana na yan

Offline nicoyow

  • Philmusicus Addictus
  • *****
Re: Help on USB guitar link clone (China), detection & sound problem
« Reply #11 on: May 24, 2017, 02:15:18 PM »
any updates? hve the same issue  :lol: :lol:
Sa pinipig, bukod sa pwede mo singhutin, pwede mo rin tikman.

Offline CeL1916

  • Philmusicus Addictus
  • *****
Re: Help on USB guitar link clone (China), detection & sound problem
« Reply #12 on: May 25, 2017, 11:38:12 AM »
any updates? hve the same issue  :lol: :lol:

Do not install the included driver, saksak mo lang tapos hayaan mo madetect ng windows yung device, then install asio4all.

Sa win7 sound setting, select it as the "recording and playback device" also sa input volume, left click mo para maging "db" yung volume indicator at hindi "%".(default kasi ng windows eh 100%) pero pag ginawa mo db eh +10db siya. Set mo sa 0 db (hindi 0 %) ha.

Yan, sana naintindihan kasi naalala ko noon dyan lang naman ako nagkaproblema. Yan ang unang una kong interface noon haha.(binalot ko din ng foil yan at inilayo sa cpu para di maingay)
PM Transaction References: Rmansh/Miong_Magno/Pentagram_x/Julandmic09/Vanhatred/Liway77/cyrus2477/jracz_28/ichigo02/
thenameisjm/teddy_munoz/Xelly/haha/ekoy08/kalel_23/sensei_24/lucky/drahcirnna24/r_chino/ilikecarrots

Offline nicoyow

  • Philmusicus Addictus
  • *****
Re: Help on USB guitar link clone (China), detection & sound problem
« Reply #13 on: May 25, 2017, 08:26:54 PM »
Do not install the included driver, saksak mo lang tapos hayaan mo madetect ng windows yung device, then install asio4all.

Sa win7 sound setting, select it as the "recording and playback device" also sa input volume, left click mo para maging "db" yung volume indicator at hindi "%".(default kasi ng windows eh 100%) pero pag ginawa mo db eh +10db siya. Set mo sa 0 db (hindi 0 %) ha.

Yan, sana naintindihan kasi naalala ko noon dyan lang naman ako nagkaproblema. Yan ang unang una kong interface noon haha.(binalot ko din ng foil yan at inilayo sa cpu para di maingay)

susubukan ko pag uwe to. Binili po sa Gpusher un e pero dahil nga ayaw gumana, di ko muna pinakealaman. Sinusubuksukan ko lang mga alternatives hanggang ngayon HAHAHA
Sa pinipig, bukod sa pwede mo singhutin, pwede mo rin tikman.

Offline ruzzty06

  • Netizen Level
  • **
Re: Help on USB guitar link clone (China), detection & sound problem
« Reply #14 on: June 07, 2017, 09:41:32 AM »
Pwd ba to na direct monitoring ng input ng guitar mo? Ung di na dadaan ng PC pabalik sa headset? Pang record lang.

Offline chazkidlat

  • Veteran Member
  • ****
Re: Help on USB guitar link clone (China), detection & sound problem
« Reply #15 on: October 08, 2018, 04:48:40 PM »
ang multo ay bumabalik.

Bumili ako sa Lazada ng China USB guitar Link.

Gamit ko Windows 10. Asus laptop

Amplitube 4

pag hinahawakan ko dulo ng cable nakikita ko audio input volume meter na tumataas. pag nag strum din ako gitara ganun din.

pero walang lumalabas na output sound.

kahit ano. as in ZERO

Gamit ko asio4all software for win10

tapos nag install din ako behringer na driver para dun sa USB guitar link since parang parehas din naman..

Help! :(
"Night gathers, and now my watch begins. It shall not end until my death. I shall take no wife, hold no lands, father no children. I shall wear no crowns and win no glory. I shall live and die at my post. I am the sword in the darkness."