Author Topic: who wants to play tamiya mini 4wd? (Read 44579 times)

Musikerochan · « **Reply #100 on:** July 19, 2013, 08:33:45 AM »

Quote from: pie-key on July 18, 2013, 11:20:19 PM

One test pa dapat atlest flawless ang spin. Kahit finger push lang. Walang kalog whatsoever.
Tsaka imposible ma DQ basta maayus setup mo di naman makikita yan. Kung roller yan na 8mm
siguraduhin mo may eyelet na tamiya yung aluminum. Hindi na halata yan.

tested the rollers with magnets. they got attracted. tested my authentic tam rollers. they too were magnetized.

wala naman silang alog, although kinalawang na kasi di ko na nababad sa oil. di ko na rin tanda kung alin talaga yung mga tamiya rollers nung binili ko sa Lil's dati.

Quote from: gnarly on July 18, 2013, 11:38:04 PM

yun oh Brocken G ito ang kaisa-isahan kong kotse noon. sarap gamitin sa technical at highspeed race. napaka-stable.

pero ayaw na ng iba ngayon. lapad daw. para daw flying carpet pag tumatalon

gnarly · « **Reply #101 on:** July 19, 2013, 01:59:18 PM »

Quote from: Musikerochan on July 19, 2013, 08:33:45 AM

tested the rollers with magnets. they got attracted. tested my authentic tam rollers. they too were magnetized. wala naman silang alog, although kinalawang na kasi di ko na nababad sa oil. di ko na rin tanda kung alin talaga yung mga tamiya rollers nung binili ko sa Lil's dati.

pero ayaw na ng iba ngayon. lapad daw. para daw flying carpet pag tumatalon

yun lang.dati ganun din ang tingin ko pero nung nagamit ko, ayus!

Musikerochan · « **Reply #102 on:** July 19, 2013, 02:24:44 PM »

im buying a black BG next month. tsaka extrang red BG cowl. peborit eh.

pero back to my question: how do i know kung authentic tams nga yung mga bearings ko? deads na yung TM forum eh.

xtoper · « **Reply #103 on:** August 01, 2013, 11:14:19 PM »

mga boss, active mini 4wd racer po ako ngayon, technical category. masaya pa din and maraming makikilalang new friends.
exciting pa din

kaya lang iba na ang takbuhan ng technical race ngayon compared nung late 90's to early 2000's.

check this site po para po sa mga interesado

http://tamiyamanila.org/

eto po sample video

http://www.youtube.com/watch?v=HiHanhZD0Qk

xtoper · « **Reply #104 on:** August 01, 2013, 11:25:48 PM »

Quote from: Musikerochan on July 18, 2013, 12:09:58 PM

teka matanong lang. pa-help naman ako ma-verify kung Tams tong mga bearing na nakita ko sa stash ko,

NOTE: those are 8mm bearings pala, not 7mm. thanks!

8mm bearings looks legit pero di ako sure. yung iba sir mukhang hindi tamiya.
pero basta sa lil's binili kahit RC bearings allowed sa all tamiya race.

try mo din pumunta sa harrison plaza, sa may taas ng jollibee escalator, dun kami nagrarace, maraming makakatulong sayo dun sir

Musikerochan · « **Reply #105 on:** August 02, 2013, 09:15:13 AM »

^wala kasi akong matinong caliper kaya di ko masukat nang husto yung sukat nila, particularly yung insides. parang off din yung sukat nung labas eh. parang may 10.5 imbis na 10mm. yung "9mm" jan sakto yung caps ng 19mm rollers. yung "8mm" tsaka yung "10mm" pareho inside diameters.

xtoper · « **Reply #106 on:** August 02, 2013, 03:17:43 PM »

pag punta mo dun sir pwede naman natin icompare sa bearings ng ibang racer, o kaya pwede ipacheck sa head marshal para maverify kung allowed yung bearings mo. hehe. kami naman hindi na din namin ginagamitan ng caliper yung bearings, gulong na lang sir.

pinaka importante sir madalaw mo yung racing center para alam mo na yung next step na gagawin and bibilihin mong pyesa

Musikerochan · « **Reply #107 on:** August 02, 2013, 05:04:21 PM »

nakow malabo. batangas pa ako brad.

xtoper · « **Reply #108 on:** August 02, 2013, 06:53:05 PM »

yun lang ang layo..
meron din diyan sa batangas sa pagkakaalam ko, di ko lang sure kung saan, magtatanong ako then post ko dito para kung sakali gusto mo puntahan. hehe.

Musikerochan · « **Reply #109 on:** August 05, 2013, 08:32:41 AM »

Lemery daw. meron dito sa nasugbu, pero open speed/speedtech ang laro. tech sana gusto ko. pero pag ganitong open, malabong maka-place, lalo na kung de-plantsa ang mga kalaro. sabagay ok na din, mahalaga nakakapaglapag.

Ralph_Petrucci · « **Reply #110 on:** February 07, 2014, 12:08:23 PM »

VS Chassis for the win. Fastest chassis as proven in tests hahahaha!

xaeroblade · « **Reply #111 on:** February 07, 2014, 10:59:37 PM »

Mahanap nga ang mga kotse ko, namiss ko to

Ralph_Petrucci · « **Reply #112 on:** February 08, 2014, 12:01:45 AM »

Quote from: xaeroblade on February 07, 2014, 10:59:37 PM

Mahanap nga ang mga kotse ko, namiss ko to

Iba talaga eh hahaha its the closest I can get to modifying a car hahahaha feeling pitcrew hahahaha!

fizz450_03 · « **Reply #113 on:** February 08, 2014, 12:24:53 AM »

ako! haha actually my sister and i are looking to compete this may...

Ralph_Petrucci · « **Reply #114 on:** February 08, 2014, 11:01:25 PM »

Quote from: fizz450_03 on February 08, 2014, 12:24:53 AM

ako! haha actually my sister and i are looking to compete this may...

San kayo magcocompete sir? san pa ba meron?

ayofish · « **Reply #115 on:** May 12, 2014, 03:31:40 PM »

Meron technical races sa HPRC sa Harrison plaza second floor from THursdays - Sundays. usually mga 3pm nag start. or check niyo sa tamiyamanila.org ang race sched. meron din atang race center sa makati cinema square. although I have never been to that one.

Ralph_Petrucci · « **Reply #116 on:** May 12, 2014, 03:36:16 PM »

Quote from: ayofish on May 12, 2014, 03:31:40 PM

Meron technical races sa HPRC sa Harrison plaza second floor from THursdays - Sundays. usually mga 3pm nag start. or check niyo sa tamiyamanila.org ang race sched. meron din atang race center sa makati cinema square. although I have never been to that one.

panay technical na eh.

mas masaya yung super speed

ROBORATS · « **Reply #117 on:** September 06, 2014, 11:50:32 AM »

waaahh, gusto ko ulit maglaro nito

Igor · « **Reply #118 on:** August 31, 2015, 07:27:09 AM »

Sa tingin ko ito magiging Bonding namin ng anak ko. im saving up for the track, and may nakita ako mabibilhan ng Tamiya.
Meron ako dati pero puro imititation lang. may nakita ako second hand pero tamiya brand and binuksan lang pero di tinanggal mga parts.

Ralph_Petrucci · « **Reply #119 on:** September 01, 2015, 11:00:22 AM »

Quote from: Igor on August 31, 2015, 07:27:09 AM

Sa tingin ko ito magiging Bonding namin ng anak ko. im saving up for the track, and may nakita ako mabibilhan ng Tamiya.
Meron ako dati pero puro imititation lang. may nakita ako second hand pero tamiya brand and binuksan lang pero di tinanggal mga parts.

paps, men sa MCS, dun sa mga area ng gun shop, relatively, divisoria price na yung legit Tamiya Cars nila. ang laki pa ng selection. wala nga lang silang AC Parts so sa divi lang meron nun. pero kung all tamiya setup paps, dun ka na sa MCS. murang mura naman kahit papano

yung tracks naman, hanap ka lang sa olx. mas masaya kasi ang malalaking track

UselessFingers17 · « **Reply #120 on:** September 01, 2015, 10:08:38 PM »

ui nakkamiss to ah

ayofish · « **Reply #121 on:** September 01, 2015, 10:12:39 PM »

Ako dati sa hprc naglalaro mga 2 years ago na din. Sobrang saya talaga nito. Meron pa pala da mcs. Pero diba speed tech na lang andun at complex tracks?

Ralph_Petrucci · « **Reply #122 on:** September 02, 2015, 01:13:12 AM »

Speed tech nalang. Tapos all tamiya only. Huhuhu

Igor · « **Reply #123 on:** September 02, 2015, 04:17:01 AM »

Quote from: Ralph_Petrucci on September 01, 2015, 11:00:22 AM

paps, men sa MCS, dun sa mga area ng gun shop, relatively, divisoria price na yung legit Tamiya Cars nila. ang laki pa ng selection. wala nga lang silang AC Parts so sa divi lang meron nun. pero kung all tamiya setup paps, dun ka na sa MCS. murang mura naman kahit papano

yung tracks naman, hanap ka lang sa olx. mas masaya kasi ang malalaking track

Bro San Banda yung MCS?

Ralph_Petrucci · « **Reply #124 on:** September 02, 2015, 09:35:08 AM »

Quote from: Igor on September 02, 2015, 04:17:01 AM

Bro San Banda yung MCS?

makati cinema square. sa pasongtamo/chino roces

News:

Author Topic: who wants to play tamiya mini 4wd? (Read 44579 times)