Author Topic: the "bare bones" pedal board... (Read 140285 times)

jepbueno · « **Reply #625 on:** July 06, 2014, 01:45:33 PM »

^guys thanks for the tips pero may power supply na kasi ako with separate outputs so hindi ako nagchain.. and 3 years old na yung diy patch cables ko kaya gusto ko maiba naman.

kakatingin ko lang sa audiophile pioneer, 240each ibanez patch cables ang mahal hahaha. I want to try the solderless cables pag kinaya.

shodawmoon · « **Reply #626 on:** July 06, 2014, 04:02:47 PM »

Quote from: jepbueno on July 06, 2014, 01:45:33 PM

^guys thanks for the tips pero may power supply na kasi ako with separate outputs so hindi ako nagchain.. and 3 years old na yung diy patch cables ko kaya gusto ko maiba naman.

kakatingin ko lang sa audiophile pioneer, 240each ibanez patch cables ang mahal hahaha. I want to try the solderless cables pag kinaya.

what power supply are you using? I use a Daisy chain with my 6 output (seperate outputs ) Pedalmax PSU. It looks tidier and works just fine. I asked Emil Murillo about it and he says it's ok to you DC/ daisy chains with his PSU.

r_chino18 · « **Reply #627 on:** July 06, 2014, 04:14:20 PM »

Stripped down to my bare essentials..

rowley75 · « **Reply #628 on:** July 06, 2014, 04:27:05 PM »

Update:
AMT jap girl wah - Korg pitchblack - Hermida zendrive red - Ibanez Jemini - Ehx #1 echo - Keeley Katana v2
Hopefully magiging ganito yung final(though gusto ko pa ng fuzz, plexi type at mods):
AMT jap girl wah - Korg pitchblack - Hermida zendrive red - Amptweaker Tightmetal(bibilhin palang bukas) - Malekko ekko616 dark(hinihintay stock ni Pete) - Keeley Katana v2

jepbueno · « **Reply #629 on:** July 06, 2014, 04:44:58 PM »

Quote from: shodawmoon on July 06, 2014, 04:02:47 PM

what power supply are you using? I use a Daisy chain with my 6 output (seperate outputs ) Pedalmax PSU. It looks tidier and works just fine. I asked Emil Murillo about it and he says it's ok to you DC/ daisy chains with his PSU.

Yup pedalmax rin sakin! You mean nakachain ka nakaconnect lang sa 1 output ng psu mo? I'll think about that. Nice!

Also, nagtry ako gumamit ng cable ties instead of velcro sa pedals. Oks na sana kaso umuusog yung wah haha.

Nice dimarzio patch cables ser chino!

shodawmoon · « **Reply #630 on:** July 06, 2014, 08:03:08 PM »

Quote from: jepbueno on July 06, 2014, 04:44:58 PM

Yup pedalmax rin sakin! You mean nakachain ka nakaconnect lang sa 1 output ng psu mo? I'll think about that. Nice!

Also, nagtry ako gumamit ng cable ties instead of velcro sa pedals. Oks na sana kaso umuusog yung wah haha.

Nice dimarzio patch cables ser chino!

yep. Exactly, you just need to plug the chain into 1 output jack. Try using powergrip or 3M's Dual lock instead of the standard velcro.

arkeetar · « **Reply #631 on:** July 07, 2014, 08:08:00 AM »

Arkeegrill2014

rowley75 · « **Reply #632 on:** July 08, 2014, 02:54:13 PM »

Malekko Ekko616 dark nalang pampalit sa delay!

NTM · « **Reply #633 on:** July 23, 2014, 09:49:21 AM »

I'm also joining soon this bare bones pedalboard soon! haha.

Might use Tuner > Timmy > VS Route 808 (or will replace it with FD2) > Nova Delay

Pretty satisfied with these pedals. and I realize that this is all what I REALLY NEED.

iceblink-luck · « **Reply #634 on:** July 23, 2014, 11:13:11 AM »

I dont why this thread makes my day i, still dont have a minimal size pedal board ..i have a several pedals which are redundant i guess...

arkeetar · « **Reply #635 on:** July 23, 2014, 01:12:10 PM »

Quote from: rowley75 on July 08, 2014, 02:54:13 PM

Malekko Ekko616 dark nalang pampalit sa delay!

s'yo ko unang nakita yang zendrive red,
separate mo ginagamit sa tight metal or cascaded? na try mo na after ng tight metal yung zendrive? daming tanong

rowley75 · « **Reply #636 on:** July 23, 2014, 01:34:42 PM »

Quote from: arkeetar on July 23, 2014, 01:12:10 PM

s'yo ko unang nakita yang zendrive red,
separate mo ginagamit sa tight metal or cascaded? na try mo na after ng tight metal yung zendrive? daming tanong

seperate ko ginagamit e. tinry ko icascade. di kinakaya ng noisegate ng tight metal yung gain at masyado naoover power ng tightmetal yung zendrive kaya parang useless din. btw nung cinascade ko, nasa 5 lang gain ng tight metal at 0 sa zendrive.

arkeetar · « **Reply #637 on:** July 23, 2014, 01:43:15 PM »

Quote from: rowley75 on July 23, 2014, 01:34:42 PM

seperate ko ginagamit e. tinry ko icascade. di kinakaya ng noisegate ng tight metal yung gain at masyado naoover power ng tightmetal yung zendrive kaya parang useless din. btw nung cinascade ko, nasa 5 lang gain ng tight metal at 0 sa zendrive.

ah dahil lam naman natin kung alin yung nasa last chain yun ang mas aangat,
kung pagbaligtarin mo, after yung zendrive tapos alalay ka sa gain ng tight metal.
Sa tingin ko mas usable yung ganyang setup.
may compression din kasi ang zendrive.

rowley75 · « **Reply #638 on:** July 23, 2014, 02:32:48 PM »

Quote from: arkeetar on July 23, 2014, 01:43:15 PM

ah dahil lam naman natin kung alin yung nasa last chain yun ang mas aangat,
kung pagbaligtarin mo, after yung zendrive tapos alalay ka sa gain ng tight metal.
Sa tingin ko mas usable yung ganyang setup.
may compression din kasi ang zendrive.

natry ko nadin na sa huli yung zendrive. masyado dark sounding for my taste. oks din yung zendrive+keeley katana. cutting lead tone na hindi gaano gain-y.

soundhole8 · « **Reply #639 on:** July 24, 2014, 10:20:11 AM »

I'll be joining this thread soon...
Kakainspire ang minimal pedal set up.
Minsan sa dami ng pedals hindi naman na nga namamaximize ang gamit.
Mas mainam ang konti, mas matutukan ma tweak ang bawat pedal.
Mas madidiscover mo ang capabilities ng pedals mo.

Ahhh can't wait to have my own bare bones pedalboard.

jmwreck · « **Reply #640 on:** September 28, 2014, 12:48:51 AM »

Quote from: jepbueno on July 05, 2014, 11:17:40 PM

Sir jmwreck pano mo naattach ang pedals mo sa board? What's that grey surface hehe looks good

velcro yung gamit ko sa pag attach, yung gray ay nabili ko sa hardware, anti slip na pwede ilagay sa table or countertop, di siya self adhesive so nilagyan ko ng double sided.

BlackDiamond · « **Reply #641 on:** September 28, 2014, 02:09:45 PM »

fretzburner · « **Reply #642 on:** October 11, 2014, 06:59:59 PM »

[/u

rl]
[url=http://postimage.org/]image hosting 30 mb

red toggle switch for combo/4x12 cab sim
center diy pedal is okko gain + inspired

by · « **Reply #643 on:** October 12, 2014, 03:53:55 PM »

Quote from: arkeetar on July 07, 2014, 08:08:00 AM

Arkeegrill2014

Anong mod ng boss bd2 niyo po sir?

arkeetar · « **Reply #644 on:** October 12, 2014, 04:54:20 PM »

Quote from: by on October 12, 2014, 03:53:55 PM

Anong mod ng boss bd2 niyo po sir?

Wala, 2nd hand stock hehe

titser_marco · « **Reply #645 on:** October 12, 2014, 06:01:55 PM »

Quote from: fretzburner on October 11, 2014, 06:59:59 PM

[/u

rl]
[url=http://postimage.org/]image hosting 30 mb

red toggle switch for combo/4x12 cab sim
center diy pedal is okko gain + inspired

What a neat set up! Mind sharing the following details? Your set up (part the cab sim bit and the XLR out) is something I've always wanted to build:

- What pedalboard did you use as a base?
- Which pedal creates the cab sim'd out?
- I see an XLR out in there; is that a cab sim'd out as well?

Thanks man!

Sent from my iPhone using Tapatalk

fretzburner · « **Reply #646 on:** October 12, 2014, 06:24:08 PM »

Thanks titser_marco.
pedalboard is DIY custom made for these 3 pedal setup.
signal chain - tuner-OD-MS50-cabsim(analog)
cabsim(H&K inspired) embedded in pedalboard-two outputs(xlr and normal 1/4in jack)

titser_marco · « **Reply #647 on:** October 12, 2014, 09:24:55 PM »

Quote from: fretzburner on October 12, 2014, 06:24:08 PM

Thanks titser_marco.
pedalboard is DIY custom made for these 3 pedal setup.
signal chain - tuner-OD-MS50-cabsim(analog)
cabsim(H&K inspired) embedded in pedalboard-two outputs(xlr and normal 1/4in jack)

Nice! Pa-pm naman ng schematic ng cab sim.

Sent from my iPhone using Tapatalk

blitzkriegbugz · « **Reply #648 on:** October 31, 2014, 10:59:39 PM »

Pasali po!

fretzburner · « **Reply #649 on:** November 01, 2014, 07:04:08 AM »

New revision of my small board(okko/tuner=out, in jendrive)

print screen windows 7

News:

Author Topic: the "bare bones" pedal board... (Read 140285 times)