Pedal MAx PSU

[emil_murillo]

Sir Letour's new music buddy.

• PED-2A (1 X 9VAC output)
• For Digitech RP3

[greasykid]

How about a picture with readout from your DVM?  Tutal nandyan na yung metro, magsukat na!  Tapos saksakan ng maraming effects para makita yung rate ng regulation, di ba?   

[emil_murillo]

Sir, yung radial tonebone 15v dc 400mA po. salamat

Yap. Sir phoenix_rising there are 2 option:

• Puwedeng idag-dag natin sa loob ng circuitry yung 15V then designate natin yung 1 output for 15V. - with this one may nagawa na tayo (11 outputs 9V & 1 ouput 12V)
• Or all outputs are 9V then we make a separate and detachable 9V-15V converter - so you can use it with any of the outputs you choose.

Parang mas gusto ko yung first option para isahan nalang. so that would be 12 outputs just incase magdagdag ako ng pedals, la na ako problem.  What's the size dimension of the said psu? and mga how much would it cost?

Just out of curiousity, what would the second option look like?

San ka by the way sa marikina? i work kasi sa marikina, sa east drive. thanks.

About yung size sir:

• 2" - height.
• 3" - depth (front to rear)
• 5" - width

Or puwede ka dumaan dito para makita mo yung order ni Alex William ng Behringer.  Our place is just near Marikina Engineering Center.  Paliparan, Sto. Nino lang.

About the price.  Dati bigay ko sa 12 outputs (PED-IIA) is P1.5K, masyado mababa ang ROI (return of investment) kaya by monday ko pa made-declare are new prices after ko ma-settle sa mga suppliers yung mga usapan.

[emil_murillo]

Sir, yung radial tonebone 15v dc 400mA po. salamat

Yap. Sir phoenix_rising there are 2 option:

• Puwedeng idag-dag natin sa loob ng circuitry yung 15V then designate natin yung 1 output for 15V. - with this one may nagawa na tayo (11 outputs 9V & 1 ouput 12V)
• Or all outputs are 9V then we make a separate and detachable 9V-15V converter - so you can use it with any of the outputs you choose.

Parang mas gusto ko yung first option para isahan nalang. so that would be 12 outputs just incase magdagdag ako ng pedals, la na ako problem.  What's the size dimension of the said psu? and mga how much would it cost?

Just out of curiousity, what would the second option look like?

San ka by the way sa marikina? i work kasi sa marikina, sa east drive. thanks.

About yung size sir:

• 2" - height.
• 3" - depth (front to rear)
• 5" - width

Or puwede ka dumaan dito para makita mo yung order ni Alex William ng Behringer.  Our place is just near Marikina Engineering Center.  Paliparan, Sto. Nino lang.

About the price.  Dati bigay ko sa 12 outputs (PED-IIA) is P1.5K, masyado mababa ang ROI (return of investment) kaya by monday ko pa made-declare are new prices after ko ma-settle sa mga suppliers yung mga usapan.

Sige po sir, maraming salamat po. pero more or less baka ganun din ang iorder ko yulad ng kay  alex william, pero may 15v na isa. balitaan niyo nalang po sa akin yung sa price. Pero kung sakali nag dedeliver po kayo or pick up lang talaga?

salamat ulit sir.

Sure po sir.  Will do on monday, probably night.  Tnx 

[emil_murillo]

Honga sir medyo na move yung appoinment ko.  Pero cguro old price pa din muna ang ibibigay ko sayo.  Tsaka ko na lang i-declare kapag ayuz na yun sa supplier.  OKS sir! 

[jun_gats]

up natin 

[NinoAlejandro]

you rock emil...my pedal max is the best...i just took it on tour to the US, and the techs said that it was awesome...i want to have a few more made...different specs naman...since may Nino Alejandro model 1 na, lets talk about model 2...

[emil_murillo]

you rock emil...my pedal max is the best...i just took it on tour to the US, and the techs said that it was awesome...i want to have a few more made...different specs naman...since may Nino Alejandro model 1 na, lets talk about model 2...

Yes idol!  Nice to hear from you sir.  Say hi to daniel and to the rest of the band.  Just wanna thank mr. daniel crisologo nga pala for introducing the psu to pinoyguitarist@yahoogroups.com.  I got several orders from them namely sir paul daing, sir daniel cruz and some referals from their members.

Tnx.  Tnx.   

[jun_gats]

wow! more power sayo sir Emil.

[emil_murillo]

I made a proto-type circuit (under observation) that gives:

• 9.67vdc @ 2500mA.
• 80db ripple rejection
• transient voltage protected (nothing new!)
• voltage regulated & current regulated (now that's new!).
  

Circuitry:


Voltage Reading (vdc):


Current Reading (Ampere):


Possible Bugs:

• harmful to rectifier (if not change to 3A type)
• harmful to linear transformer (again if not change to 3A or higher than 2.5A)

I am palnning to make a "Thermal Protection System" pa naman sa linear transformer para hindi sumunog.

Debugging is the next stage.

[emil_murillo]

Sir emil, excired na ako ma-try at makuha yung psu sa monday. Balitaan mo nalang ako o di kaya text text nalang. Ipapadala mo ba kay Ms. Nancy yung psu? salamat!!!

Puwede din i-deliver ko yan sa workplace nyo.  Or better yet daanan mo na lang dito sir, mate-testing mo pa.

[emil_murillo]

wow! more power sayo sir Emil.

Ayuz na ayuz itong ginawa mong thread sir.   

[emil_murillo]

Sir emil, excired na ako ma-try at makuha yung psu sa monday. Balitaan mo nalang ako o di kaya text text nalang. Ipapadala mo ba kay Ms. Nancy yung psu? salamat!!!

Puwede din i-deliver ko yan sa workplace nyo.  Or better yet daanan mo na lang dito sir, mate-testing mo pa.

Para saan nga pala yung 15vdc sir tsaka ilan yung current draw ng pag-gagamitan mo nun sir. Tnx

[emil_murillo]

Aside from the 6 pedals you're using now.  Are planning to add up some more pa ba sir.

[emil_murillo]

Aside from the 6 pedals you're using now.  Are planning to add up some more pa ba sir.

most probably in the near future, basta more on boss type pedals. planning to get a boost pedal, chorus and a compressor, and a volume pedal.

Ok!  but please be very careful with current draws.  It doesnt mean you'll have to push the 2000mA limit.  Maganda kung nasa 1000mA lang ang current draws ng mga pedals mo then use a 2000mA psu.

Analog Boss & Behringer pedals draws a 10mA-30mA per stomps.  But if you will look at the manual it says "use 300mA power supply" or atleast "100mA regulated power supply" that's x10 or x30.  That is because it's harmful to your psu.  Susunog yang psu sir. ->


transformer meltdown.

I am only reminding you because you have a 400mA one.  Current draw pa lang yun.  Kung iko-compare natin with Boss & Behringer na x10.  Pero if i we're to ask i-limit mo na yung 1000mA ng psu para sa 400mA na stomps.

[jun_gats]

wow! more power sayo sir Emil.

Ayuz na ayuz itong ginawa mong thread sir.   

Syempre sir, para maishare natin yung talent mo, up pa natin

[emil_murillo]

wow! more power sayo sir Emil.

Ayuz na ayuz itong ginawa mong thread sir.   

Syempre sir, para maishare natin yung talent mo, up pa natin

Bro I got order from Manuel legarda.  Purely customized din.  All isolated.

[emil_murillo]

Aside from the 6 pedals you're using now.  Are planning to add up some more pa ba sir.

most probably in the near future, basta more on boss type pedals. planning to get a boost pedal, chorus and a compressor, and a volume pedal.

Ok!  but please be very careful with current draws.  It doesnt mean you'll have to push the 2000mA limit.  Maganda kung nasa 1000mA lang ang current draws ng mga pedals mo then use a 2000mA psu.

Analog Boss & Behringer pedals draws a 10mA-30mA per stomps.  But if you will look at the manual it says "use 300mA power supply" or atleast "100mA regulated power supply" that's x10 or x30.  That is because it's harmful to your psu.  Susunog yang psu sir. ->


transformer meltdown.

I am only reminding you because you have a 400mA one.  Current draw pa lang yun.  Kung iko-compare natin with Boss & Behringer na x10.  Pero if i we're to ask i-limit mo na yung 1000mA ng psu para sa 400mA na stomps.

Thank you for telling me that, i will keep that in mind. Malakas talaga humigop ng current ang tonebone ko. actually i never understood the mA's until now that you mentioned it. Mga boss pedals pala mababa. Well anyway, this is good to know. 

Mga analog sir medyo mababa pero yung mga digital malakas din like dd3, dd100, etc.

[emil_murillo]

Aside from the 6 pedals you're using now.  Are planning to add up some more pa ba sir.

most probably in the near future, basta more on boss type pedals. planning to get a boost pedal, chorus and a compressor, and a volume pedal.

Ok!  but please be very careful with current draws.  It doesnt mean you'll have to push the 2000mA limit.  Maganda kung nasa 1000mA lang ang current draws ng mga pedals mo then use a 2000mA psu.

Analog Boss & Behringer pedals draws a 10mA-30mA per stomps.  But if you will look at the manual it says "use 300mA power supply" or atleast "100mA regulated power supply" that's x10 or x30.  That is because it's harmful to your psu.  Susunog yang psu sir. ->


transformer meltdown.

I am only reminding you because you have a 400mA one.  Current draw pa lang yun.  Kung iko-compare natin with Boss & Behringer na x10.  Pero if i we're to ask i-limit mo na yung 1000mA ng psu para sa 400mA na stomps.

Thank you for telling me that, i will keep that in mind. Malakas talaga humigop ng current ang tonebone ko. actually i never understood the mA's until now that you mentioned it. Mga boss pedals pala mababa. Well anyway, this is good to know. 

Mga analog sir medyo mababa pero yung mga digital malakas din like dd3, dd100, etc.

Hmm, pero yung tonebone ko is analog, but i guess it needs the power to feed the tube inside.

I was referring to analog boss & behringer pedals.

[emil_murillo]

It's nothing sir.  It really happens all the time. 

[emil_murillo]

I made a proto-type circuit (under observation) that gives:

• 9.67vdc @ 2500mA.
• 80db ripple rejection
• transient voltage protected (nothing new!)
• voltage regulated & current regulated (now that's new!).
  

Circuitry:


Voltage Reading (vdc):


Current Reading (Ampere):


Possible Bugs:

• harmful to rectifier (if not change to 3A type)
• harmful to linear transformer (again if not change to 3A or higher than 2.5A)

I am palnning to make a "Thermal Protection System" pa naman sa linear transformer para hindi sumunog.

Debugging is the next stage.

Kung sa 3000mA.  Medyo mahal naman yung IC regulator niya.  700% ang taas ng price ng IC regulator.  I haven't tried other series of IC.  Hard to find kasi yung iba.  As of now eto pa lang ang series na padala ni utol galing taiwan.

[emil_murillo]

New price scheme at Pedal-Max website:

The following orders are not included in the new price scheme:

• phoenixrising
• louie aoanan
• manuel legarda

Tnx.

[jun_gats]

New price scheme at Pedal-Max website:

The following orders are not included in the new price scheme:

• phoenixrising
• louie aoanan
• manuel legarda

Tnx.

ayos sir ah, manuel legarda nmn ngayon  

[emil_murillo]

New price scheme at Pedal-Max website:

The following orders are not included in the new price scheme:

• phoenixrising
• louie aoanan
• manuel legarda

Tnx.

ayos sir ah, manuel legarda nmn ngayon  

Headed for the big time na si sir Emil eh.

Uy sir hindi naman.  Small scale nga po eh kaya made to order.  Sana ma-appruv yun plan na mag-loan para maging medium scale business.  Sinisingit lang din natin sa hectic skeds.

@ sir jun_gats -- Honga eh!.  Finally, in touch with someone whom i look forward to.  Wow! could you imagine.  From here I can see a lot of AUTOGRAPHS and TAKING PICTURES  cool bro.

[emil_murillo]

Baka sa March na ko tumanggap ng order.  Loaded na.  Mahirap umoo ng umoo, baka kapusin.  Mano-mano pa naman gawa natin.