Author Topic: the "bare bones" pedal board... (Read 139650 times)

johnny_jackhammers · « **on:** September 28, 2010, 12:08:45 PM »

i saw a bunch of people using a very minimal pedal board in the pedalboard thread.

i was thinking of making an easy to carry pedalboard set up for quick jams.

i think a good 4 pedal setup for me would be a dd7(or any of the boss dd's) + blues driver + shredhead + wah

what's you're "bare bones" set up?

bryanarzaga · « **Reply #1 on:** September 28, 2010, 12:13:07 PM »

audition just OD2/r or Shredhead..its an audition anyway

r_chino18 · « **Reply #2 on:** September 28, 2010, 12:15:34 PM »

Amp footswitch (channel selector and reverb on/off) and a tuner. That's what i use now. But of course i have to bring my amp.

No "pedalboard" yet, but the bones are already there.

musicjunkie · « **Reply #3 on:** September 28, 2010, 12:17:56 PM »

Hotcake > Rat > DD20

psychic_sushi · « **Reply #4 on:** September 28, 2010, 12:25:52 PM »

Overdrive (A-Bomb) -> Delay ...

Probably stick in a chorus depending on the mood, or a phaser pre-OD. get's the job done,makes the fingers and head work harder

johnny_jackhammers · « **Reply #5 on:** September 28, 2010, 01:03:17 PM »

post pics! he he.

pitongjerome · « **Reply #6 on:** September 28, 2010, 01:07:39 PM »

digitech rp155??

or straight to the amp for cleans (with amp reverb)

ytse_neil · « **Reply #7 on:** September 28, 2010, 01:08:11 PM »

Wah>>Od>>main dirt>>chorus>>delay.. yan lang..

Di ako mahilig sa phaser, tremolo, octave, harmonizer, looper at iba pa... saka simpleng Rock n Roll lang naman tugtugan ko.. Di na kelangan nun..

cky · « **Reply #8 on:** September 28, 2010, 01:14:08 PM »

amp drive (if the amp is any good or if i'm bringing my amp)>rc2 looper (lalo kung magisa ko lang)>tu2 tuner....

Poundcake · « **Reply #9 on:** September 28, 2010, 01:17:51 PM »

Get a dirt pedal, a booster, your favorite modulation pedal, your favorite delay pedal, a reverb pedal (if you like) and a tuner.

maxi_musikero · « **Reply #10 on:** September 28, 2010, 01:18:55 PM »

Quote from: Poundcake on September 28, 2010, 01:17:51 PM

Get a dirt pedal, a booster, your favorite modulation pedal, your favorite delay pedal, a reverb pedal (if you like) and a tuner.

this.

burnsbhm · « **Reply #11 on:** September 28, 2010, 01:19:45 PM »

Just give me an amp with 2 channels, hook up a footswitch with it, a treble booster and I'm done.

cayle · « **Reply #12 on:** September 28, 2010, 01:45:42 PM »

This plus amp's onboard delay and reverb. I've got another pedal coming in, an od pedal. So i've got high gain and low gain territory covered.

coy_2cute · « **Reply #13 on:** September 28, 2010, 01:55:08 PM »

Here's what my "bare bones" setup so far...

Guitar --> Jackhammer --> Double Muff --> AMP

nathanmanansala · « **Reply #14 on:** September 28, 2010, 01:57:24 PM »

guitar -> byoc tri boost -> slightly dirty amp

johnny_jackhammers · « **Reply #15 on:** September 28, 2010, 02:44:46 PM »

Quote from: coy_2cute on September 28, 2010, 01:55:08 PM

Here's what my "bare bones" setup so far...

Guitar --> Jackhammer --> Double Muff --> AMP

panalo tong rehouse na to talaga. nag mukang boutique.

guitbox · « **Reply #16 on:** September 28, 2010, 02:55:25 PM »

I'd go for a tuner-OD-Dist-delay set-up.

vegetablejoe · « **Reply #17 on:** September 28, 2010, 02:58:55 PM »

but but but but ... where's the fuzz???!!!

Quote from: johnny_jackhammers on September 28, 2010, 12:08:45 PM

...

i think a good 4 pedal setup for me would be a dd7(or any of the boss dd's) + blues driver + shredhead + wah
...

masarapangtaho · « **Reply #18 on:** September 28, 2010, 03:16:38 PM »

honestly, i bring a G2.
but if i trim down my "board" it'll be:
Pitchblack> Dano CC Drive> Boston DD-100

Boxedking · « **Reply #19 on:** September 28, 2010, 03:21:32 PM »

wah pedal + shredhead sometimes does it for me lalo na kung tube amp pa gagamitin sa venue. sa bahay na ako nagchecheck ng tono since nakadouble locking trem naman ako.

vegetablejoe · « **Reply #20 on:** September 28, 2010, 03:24:49 PM »

sir, where did you have your amp footswitch made?

Quote from: r_chino18 on September 28, 2010, 12:15:34 PM

...

cayle · « **Reply #21 on:** September 28, 2010, 03:29:31 PM »

Quote from: vegetablejoe on September 28, 2010, 03:24:49 PM

sir, where did you have your amp footswitch made?

Siya po gumawa niyan sir.

Silaw · « **Reply #22 on:** September 28, 2010, 03:46:42 PM »

tc electronics scf > boss ps-3 > ernie ball 6167 > amp.

i rarely need a barebones setup since i only play at home, and when i do play outside it's mainly with acoustics.

samuelfianza · « **Reply #23 on:** September 28, 2010, 03:55:11 PM »

jmreyes · « **Reply #24 on:** September 28, 2010, 04:05:48 PM »

Tuner > OD > Boost Pedal > Delay. Stick in a wah if you need one.

News:

Author Topic: the "bare bones" pedal board... (Read 139650 times)