DIY boutique amps, pedals, mod kits, proto-type circuits, etc - Post them here!

[jmwreck]

sorry for the double post

[gambit07]

Tnx sa reply sir jm! Try ko rin magimbento ng style para sa designs..

Mods: sorry po sa multiple posts, akala ko hindi napost reply ko, puro error lang natanggap ko last night.. Sorry po.

[gambit07]

Tnx sa reply sir jm! Try ko rin magimbento ng style para sa designs..

Mods: sorry po sa multiple posts, akala ko hindi napost reply ko, puro error lang natanggap ko last night.. Sorry po.

[judas.cradle]

Mga Boss, ask ko lang po kung ilang Volts ang transistor at ilang watts ang capacitors sa pagGawa ng pedals. Salamat po .

[cacophony]

Mga Boss, ask ko lang po kung ilang Volts ang transistor at ilang watts ang capacitors sa pagGawa ng pedals. Salamat po .

Look for its Catalogue

[judas.cradle]

panong catalogue po? bumili po kase ako sa Quiapo, tas tinanong sakin kung ilang watts ba kailangan ko na capacitors. so bali capacitance and wattage ang need mo malaman.

then nakita ko lang nun sang araw na may ibat ibang resistors din pala, may mga Voltage sila.. so pano yan idol?? ano ba mga ginagamit nyo components??

naitanong ko na dati yung sa capacitors e, nalimutan ko po. XD

[judas.cradle]

panong catalogue po? bumili po kase ako sa Quiapo, tas tinanong sakin kung ilang watts ba kailangan ko na capacitors. so bali capacitance and wattage ang need mo malaman.

then nakita ko lang nun sang araw na may ibat ibang resistors din pala, may mga Voltage sila.. so pano yan idol?? ano ba mga ginagamit nyo components??

naitanong ko na dati yung sa capacitors e, nalimutan ko po. XD

[deliciouspapa]

voltage rating ang kailangan ng capacitors. not watts.  it's typically a bit higher than the voltage of the of the power supply.  for pedals,  it's 16V or higher.  what will limit you is space as higher voltage capacitors are usually bigger.

for resistors, it's resistance (ohms) and power (watts).  for pedals, it's usually 1/4 or 1/8 watt.

[voldemort]

 

[lolwat]

Nifty trick for increasing the values of your pots if they are a bit below spec (e.g. instead of an exact 500K value, the potentiometer registers a 467Kohm resistance).

http://ashbass.com/AshBassGuitar/index.html?potvaluesI.html

[walanakamingyelo]

Nifty trick for increasing the values of your pots if they are a bit below spec (e.g. instead of an exact 500K value, the potentiometer registers a 467Kohm resistance).

http://ashbass.com/AshBassGuitar/index.html?potvaluesI.html

Ok sya kaso mukhang malamang sa malamang marami ka munang masisirang pots nyan bago magawa... malas mo lang kung alpha pots yung pagtitripan mo nyan hehe pero good find sya ser!

[juwanfidle09]

Just curious, may gumawa na ba sa inyo or nagconvert ng pedal to onboard guitar fx?

to be specific, parang ganito

http://artecsound.com/pickups/electronics/qdd.html

[walanakamingyelo]

Just curious, may gumawa na ba sa inyo or nagconvert ng pedal to onboard guitar fx?

to be specific, parang ganito

http://artecsound.com/pickups/electronics/qdd.html

^ Pwede naman sir kaso as you can see dun sa link ay Puro SMD para magfit dun sa cavity sa likod ng gitara pero pwede naman sya kaya lang mahihirapan sya sa mga gitara na may small cavity.

[judas.cradle]

voltage rating ang kailangan ng capacitors. not watts.  it's typically a bit higher than the voltage of the of the power supply.  for pedals,  it's 16V or higher.  what will limit you is space as higher voltage capacitors are usually bigger.

for resistors, it's resistance (ohms) and power (watts).  for pedals, it's usually 1/4 or 1/8 watt.

salamat po idol!!! XD

[judas.cradle]

voltage rating ang kailangan ng capacitors. not watts.  it's typically a bit higher than the voltage of the of the power supply.  for pedals,  it's 16V or higher.  what will limit you is space as higher voltage capacitors are usually bigger.

for resistors, it's resistance (ohms) and power (watts).  for pedals, it's usually 1/4 or 1/8 watt.

salamat po idol!!! XD

[jmwreck]

Snow White Autowah

   


Maestro Phaser

[jmwreck]

Maestro Phaser

   


Snow White Autowah

[Musikerochan]

^gondoh! noice Jm!

[Ralph_Petrucci]

Ganda nung Phaser JM!

[jmwreck]

Ganda nung Phaser JM!

^gondoh! noice Jm!

salamat

[judas.cradle]

pahelp naman po mga idol!

i got an Artec Power Wah today.
wala syang FottSwitch so shinort ko nlang sya para laging On,
pag inoOn ko, nagbabago yung mids ng signal pero pag tinatry ko i"wah" , hindi sya gumagana.
intact naman ang board, most likely, wla namang nagalaw. kaso bakit kaya hindi guymagana yung mismong wah?
thanks i advance po sa help

[judas.cradle]

tska sino2 po ba pwede ko kontakin for pedal repair? XD sorry po sa abala , thanks in advance.,

[modmod]

Boston Eq stock:

Boston Eq modded:

[chazkidlat]

im confused

Solid state pre amp ba to?

60watts

2 x 6L6 GC

1 x 12ax7

May reverb sya. Posible na reverb loop nya yung 12ax7? Or phase inverter?
Tpos solid state yung pre amp nya? Kaya ba ng isang 12ax7 ang 60watts?   Nakaka depress haha i need your help guys!

http://www.guitarsjapan.com/1976_Jugg_Box_Stuff_O60G_Tube_Amplifier.html

[Ralph_Petrucci]

im confused

Solid state pre amp ba to?

60watts

2 x 6L6 GC

1 x 12ax7

May reverb sya. Posible na reverb loop nya yung 12ax7? Or phase inverter?
Tpos solid state yung pre amp nya? Kaya ba ng isang 12ax7 ang 60watts?   Nakaka depress haha i need your help guys!

http://www.guitarsjapan.com/1976_Jugg_Box_Stuff_O60G_Tube_Amplifier.html

ang watts papi ang alam ko nakadepende sa power tubes. yung 12ax7, nasa preamp yun or sa reverb/tremolo. tancha ko nasa preamp to.