Author Topic: Before and After Thread (Read 30265 times)

unnailed · « **Reply #100 on:** September 30, 2009, 11:24:52 PM »

post nyo na lang pag tapos na...

arien_drummer · « **Reply #101 on:** October 01, 2009, 08:45:36 PM »

mga sir... any tips on painting the hardware (lugs, hoops, tuning rods, mounts) to make them stand out with different colors..

irajames · « **Reply #102 on:** October 01, 2009, 08:51:00 PM »

Quote from: arien_drummer on October 01, 2009, 08:45:36 PM

mga sir... any tips on painting the hardware (lugs, hoops, tuning rods, mounts) to make them stand out with different colors..

Well paint will easily chip off from hardware especialy in the hoops because you sometimes hit them with the sticks. I suggest that you have them powder coated.

Riff_6603 · « **Reply #103 on:** October 02, 2009, 07:55:38 PM »

Quote from: irajames on October 01, 2009, 08:51:00 PM

Well paint will easily chip off from hardware especialy in the hoops because you sometimes hit them with the sticks. I suggest that you have them powder coated.

yup, meron sa may versa powdercoating.. ask peeves na lang sa location..

arien_drummer · « **Reply #104 on:** October 03, 2009, 07:19:39 AM »

magkakanu naman powder coating? sana medyo mura... hehehe. pag tinaaman ko yung hoop (pero powdercoated) mag chichip ba yung paint?

Riff_6603 · « **Reply #105 on:** October 03, 2009, 12:11:56 PM »

Quote from: arien_drummer on October 03, 2009, 07:19:39 AM

magkakanu naman powder coating? sana medyo mura... hehehe. pag tinaaman ko yung hoop (pero powdercoated) mag chichip ba yung paint?

mura lang around 30php sa hoops and lugs, sa shells di ko matandaan.. prices might have significantly increased ever since then siguro pero hindi naman lalagpas un ng 100php.. paint MIGHT chip, due to significant wear and tear and time itself, these are great factors to consider din..

pedros_canabis · « **Reply #106 on:** October 22, 2009, 12:49:58 AM »

Just browsing and accidentally found this....
Check the link

http://soft.com.sg/forum/gear-drums/82880-refinishing-your-drumset-getting-awesome-natural-finish-diy.html

kino · « **Reply #107 on:** October 22, 2009, 01:27:02 AM »

Quote from: pedros_canabis on October 22, 2009, 12:49:58 AM

Just browsing and accidentally found this....
Check the link

http://soft.com.sg/forum/gear-drums/82880-refinishing-your-drumset-getting-awesome-natural-finish-diy.html

nice find! this would be of great help to those who want to refinish their kits in the future.

drumachine · « **Reply #108 on:** October 22, 2009, 01:32:39 AM »

applicable lang sa mga magaganda yung shells. haha. di pwede sa generic ko to.

jazon31 · « **Reply #109 on:** November 02, 2009, 08:01:29 PM »

astig pare

very creative

acazurin10 · « **Reply #110 on:** November 04, 2009, 11:37:06 PM »

I got my pearl export series like this tapos i accidentaly damaged the head of my 12" tom when i was playing kaya natira yung 13" tom nalang...but of course i restored my kit and bought some additions...kaya ok na sya...

Before:

After:

kimpoy19 · « **Reply #111 on:** November 05, 2009, 08:16:06 PM »

sir, sa coating ba eh kailangan bang tanggalin pa yung wrap sa toms? or kahit hindi na?

drumachine · « **Reply #112 on:** November 05, 2009, 09:22:08 PM »

anung klaseng coating bro? kung paint, the answer is yes. para kumapit talaga. mas makapit ang paint sa wood. basta make sire wala na yung mga sticky residue nung wraps.

pauldavid_7 · « **Reply #113 on:** November 05, 2009, 09:47:31 PM »

sa Metal snare? ano ma rerecommend para pagandahin?

sjon014 · « **Reply #114 on:** November 05, 2009, 09:55:19 PM »

Pagandahin aesthetically?

Re-chrome! But that would probably be very expensive. Powder coating, pwede rin.

pauldavid_7 · « **Reply #115 on:** November 05, 2009, 09:56:44 PM »

di ko alam yung term.. hahah! kasi walng ka design design.. help wala akong knowledge dito

kino · « **Reply #116 on:** November 05, 2009, 10:01:31 PM »

pa airbrush mo kung gusto mo lagyan ng design.

pauldavid_7 · « **Reply #117 on:** November 05, 2009, 10:07:29 PM »

Quote from: kino on November 05, 2009, 10:01:31 PM

pa airbrush mo kung gusto mo lagyan ng design.

airbrush na lang.. pwede ba to kulayan ng black paint? then pa airbrush ko?

drumachine · « **Reply #118 on:** November 05, 2009, 10:23:07 PM »

baka magchip-off yung paint? pa-powdercoat mo. then airbrush. or try mu i-hammer. hehehe

jeva · « **Reply #119 on:** November 05, 2009, 10:36:42 PM »

Quote from: pedros_canabis on October 22, 2009, 12:49:58 AM

Just browsing and accidentally found this....
Check the link

http://soft.com.sg/forum/gear-drums/82880-refinishing-your-drumset-getting-awesome-natural-finish-diy.html

Lupit ng snares nyan, 2 o 3 warlord ata, maple,bubinga at stainless ata.
OT
nasa sg ka din ba?

wilpredo · « **Reply #120 on:** November 06, 2009, 04:55:54 AM »

sali din ako, naawa kasi ako sa snare ko na nakatago lang at di nagagamit kaya binigyan ko ng konting pagmamahal hehe bumili lang ako ng sticker vinyl sa ace hardware tapos matinding kuskusan sa mga hoops, eto sila pero kulang pa ng powder coat sa hoops and bagong tension rods tapos 42's na snare wire

Sonor Force 2001 14x5.5

Fernando Brass Piccolo 14x4

Eto na sila ngayon

Sonor

Fernando

mylesthedrummer · « **Reply #121 on:** November 07, 2009, 10:27:53 PM »

Sir, so yung vinyl sticker pinatong mo lang straight sa steel shell?

Di ba nagbago tunog?

Quote from: wilpredo on November 06, 2009, 04:55:54 AM

sali din ako, naawa kasi ako sa snare ko na nakatago lang at di nagagamit kaya binigyan ko ng konting pagmamahal hehe bumili lang ako ng sticker vinyl sa ace hardware tapos matinding kuskusan sa mga hoops, eto sila pero kulang pa ng powder coat sa hoops and bagong tension rods tapos 42's na snare wire

Sonor Force 2001 14x5.5

Fernando Brass Piccolo 14x4

Eto na sila ngayon

Sonor

Fernando

g0d5_g1ft · « **Reply #122 on:** November 07, 2009, 11:02:40 PM »

makikisali lang po

from this:

to this:

wilpredo · « **Reply #123 on:** November 08, 2009, 06:50:21 AM »

Quote from: mylesthedrummer on November 07, 2009, 10:27:53 PM

Sir, so yung vinyl sticker pinatong mo lang straight sa steel shell?

Di ba nagbago tunog?

bro yung sa fernando brass shell, pinatong ko straight yung vynil kasi wala naman kalawang. yung mga nakikita mo sa pic, stains lang yan kaya ok patungan.

yung sa sonor niliha ko muna yung shell. as you can see in the pics, ang daming dotted parts kalawang yan. kinuskos ko ng maigi tapos binabad ko sa wd40. after nun ni-wrap ko na using the sticker vynil. mejo nakakapagod lang mag-wrap kasi mayat-maya may bubbles na lumalabas, matrabaho magtanggal ng bubbles haha

breech41 · « **Reply #124 on:** November 08, 2009, 10:07:25 AM »

need some help here..

eto siya"

i'm planning to make her glossy white but my problem is where i can buy hoops,lugs strainers etc. na cheap and oh can someone help me where i can buy those silicon or rubber like under the lugs of some other snare?? help naman mga sir.. may lazer pa ba sa SM north wala kasi ako makita ee?? salamat sa mga tutulong.. im expecting madami kayong feedbacks about my post. thanks

News:

Author Topic: Before and After Thread (Read 30265 times)