Hi Guys,
Finally I got the wah pedal more usable with this set up and you can try this and share your own setting if you find more secret on it.
Using the SUB-WAH conjunction with the EXP PEDAL WAH.
Here's my recipe
First initialize a user patch
Press Master/PdlFx button and goto FX CHAIN icon then select
You'll see the default chain of effect like this and we need this exact placement.
INPUT -> FX1 -> Comp -> PDL -> etc....
Press Exit button to exit and goto PDL/FX icon then select it
set the following
ExpSwFunc = Pedal Fx
Exp1Func = Wah/Fv
goto tab2
Type = CUSTOM
Pdl position = (default position no need to set)
Pedal Min = 0
Pedal Max = 100
Effect level = 100
Direct level = 100
goto tab3
CUSTOM type setting
Type = 7string wah
Q = -50
Range Low = -50
Range Hi = +50
Presence = +50
Press FX1 button
select Sub Wah
Type = FAT wah
Pdl position = (default position no need to set)
Pedal Min = 0
Pedal Max = 100
Effect level = 100
Direct level = 0
Leave it OFF
Press Master/PdlFx
goto ASSIGN icon make this assign
Assign tab1
Target = FX1:SWH
Pdl Position
Min = 0
Max = 100
Source = Exp1 Pedal
Scr mode = MOMENT
ActrngLo = 0
ActrngHi = 127
PRESS Master/PdlFx to activate
goto next Assign tab2
Type = FX1
On/Off
Min = Off
Max = On
Source = Exp1 pedal
Scr mode = TOGGLE
ActrngLo = 126
ActrngHi =127
PRESS Master/PdlFx to activate
Press onboard COMPRESSOR button to active
Type = Compressor
Sustain = 50
Attack = 50
Tone = +50
Level = 50
PRESS WRITE button to save.
DONE
Now try and step on it without anything else just this effect to hear how it work and later switch OFF the FX1 and Comp button to compare the difference!!!.
Here's just the disadvantage, you will waste FX1 for this PLUS you'll need to not to depress the exp1 pedal fully on TOE when its already ON, but you'll get use to it later after practicing some time. In return you'll like this better than without. NOW COOK YOUR OWN WAH RECIPE AND LET SHARE IT AMONG US!!
Give me your feedback too so I could test your recipe.
Enjoy our GT1
