Boss GT10 users thread

[aHeartThatNeverFade]

wala bang signal cut ang gt10? yung parang nadedelay ng konti pag-enggage niya?

[raikidoodles]

sorry to hear that you're selling your GT10 man, but you gotta do what you gotta do.

tnx bro, nangako naman si misis that by november baka bumalik kami ng US so dun na lang ako bibili, mejo dami dapat gastusan ngayon eh, pati practice amp ko and di marzio pup madadamay.

[raikidoodles]

wala bang signal cut ang gt10? yung parang nadedelay ng konti pag-enggage niya?

SOBRANG WALA SIR, swabeng swabe ang palit ng patches, real time!

[arcangelmorris]

hello my Sir,

ask ko lang, possibly band lumipat ng ibang BANK while your in the middle of a song..

halimbawa your in BANK 1 patch 2, tapos gusto mo gamitin yung nasa BANK 5 patch 3

do you have to pass the sounds you saved in BANK 2, 3, & 4 ?

sorry for this question mga Sir if mashadong basic,..I had a bad experience with another multi-fx processor before na talagang sobrang ni regret ko bat ko binili yun...just wanna learn more about the gt10.

Thanks!

[raikidoodles]

hello my Sir,

ask ko lang, possibly band lumipat ng ibang BANK while your in the middle of a song..

halimbawa your in BANK 1 patch 2, tapos gusto mo gamitin yung nasa BANK 5 patch 3

do you have to pass the sounds you saved in BANK 2, 3, & 4 ?

sorry for this question mga Sir if mashadong basic,..I had a bad experience with another multi-fx processor before na talagang sobrang ni regret ko bat ko binili yun...just wanna learn more about the gt10.

Thanks!

bro as far i know you cannot do that to any multifx, the best way is to save your bank 5 patch 3 to bank 1 patch3(etc)
or maybe save it to bank 2 patch2 so pagapak mo ng one bank higher sa gt-10 eh dun ka babagsak sa patch na gusto mo,

anyway im still not so sure if kaya ng gt-10 yun kasi honestly napakalalim ng gt-10, will search for answer na rin.

[Mardk]

bro as far i know you cannot do that to any multifx, the best way is to save your bank 5 patch 3 to bank 1 patch3(etc)
or maybe save it to bank 2 patch2 so pagapak mo ng one bank higher sa gt-10 eh dun ka babagsak sa patch na gusto mo,

anyway im still not so sure if kaya ng gt-10 yun kasi honestly napakalalim ng gt-10, will search for answer na rin.

Kailangan magaling ka magtap dancing.

[inkslingerx]

hello my Sir,

ask ko lang, possibly band lumipat ng ibang BANK while your in the middle of a song..

halimbawa your in BANK 1 patch 2, tapos gusto mo gamitin yung nasa BANK 5 patch 3

do you have to pass the sounds you saved in BANK 2, 3, & 4 ?

sorry for this question mga Sir if mashadong basic,..I had a bad experience with another multi-fx processor before na talagang sobrang ni regret ko bat ko binili yun...just wanna learn more about the gt10.

Thanks!

  possible dude, nakadelay yung bank switching, patch change will only take effect pag naengage mo na ung patch nunber. Kaya lang you have to be quick, bank 1 to bank 5 is 4 steps away plus 1 step for the patch #

[Gerrit]

hello my Sir,

ask ko lang, possibly band lumipat ng ibang BANK while your in the middle of a song..

halimbawa your in BANK 1 patch 2, tapos gusto mo gamitin yung nasa BANK 5 patch 3

do you have to pass the sounds you saved in BANK 2, 3, & 4 ?

sorry for this question mga Sir if mashadong basic,..I had a bad experience with another multi-fx processor before na talagang sobrang ni regret ko bat ko binili yun...just wanna learn more about the gt10.

Thanks!

Medyo malabo ang tanong mo bro pero if I understand it this way, paano ka makakalipat ng patch 3 BANK 5 na hindi tumutunog ang na save mong patches sa BANK 2, 3, & 4, ganun ba yon?

AFAIK, hindi ka pwedeng mag-skip ng banks without passing sa ibang banks ng GT10.  Now kung ang problem ay tumutunog ang patch paglipat mo, pwede mo i-set ang pedals to "WAIT" not "IMMEDIATE" sa systems button just go to pedals.  So global ito.  Pag na-set mo sa "WAIT", hindi mawawala ang sound ng present patch mo habang lumilipat ka ng bank.  Mawawala lang ang activation ng present patch mo kapag inapakan mo na ang next choice patch mo.  Kasi kapag ang pedal mo naka "IMMEDIATE" habang naglilipat ka ng BANK tumutunog ang ibang patch.  Hope this help

[kyxz]

please correct me if im wrong
dapat yata naka save sa magkatabing user bank para smooth
ang transition between patches (ie. from rhythm to lead)
kung preset patch i save sa user patch? 

[Gerrit]

please correct me if im wrong
dapat yata naka save sa magkatabing user bank para smooth
ang transition between patches (ie. from rhythm to lead)
kung preset patch i save sa user patch? 

Let me share to you how I do it in my GT10.  I save patches in 1 bank, sounds that I always or normally use or 1 bank for 1 song, if necessary.  I set mine like this:

Patch 1 - Clean, chorus, etc. (My clean patch)
Patch 2 - Overdrive, crunch, rock (drive patch for drive back)
Patch 3 - This is my lead/solo patch
Patch 4 - delays, harmonizer, auto wah, etc. (My effects patch)

All of the above are A channel only ha.  Pwede mo pang gamitin ang CTRL 1 pedal mo to switch to Channel B if you are using PreAmp sim.  Bale may 8 sounds ka in 1 bank.  That's how I do mine.

Just sharing.

[raikidoodles]

Kailangan magaling ka magtap dancing.

...natawa ako, no offense ha, i just imagined how fast your foot should be
parang fast picking using the foot, dapat ba up down ang pattern?

[kyxz]

Let me share to you how I do it in my GT10.  I save patches in 1 bank, sounds that I always or normally use or 1 bank for 1 song, if necessary.  I set mine like this:

Patch 1 - Clean, chorus, etc. (My clean patch)
Patch 2 - Overdrive, crunch, rock (drive patch for drive back)
Patch 3 - This is my lead/solo patch
Patch 4 - delays, harmonizer, auto wah, etc. (My effects patch)

All of the above are A channel only ha.  Pwede mo pang gamitin ang CTRL 1 pedal mo to switch to Channel B if you are using PreAmp sim.  Bale may 8 sounds ka in 1 bank.  That's how I do mine.

Just sharing.

yuun.......nadagdagan kaalaman ko...wow 8 patches, 4 x 2 channels pa pala
basta magaling ka mag tinikling  thanks sir

[Super BisDak]

wala bang signal cut ang gt10? yung parang nadedelay ng konti pag-enggage niya?

you mean switching between patches? when i use to have my g9.2tt, i compared it with the gt-10 and to be honest mas swabe ang switching ng zoom between the patches (from clean to dirt and vice versa). if you'll listen to it closely, you'll notice na may signal cut when you switch. well, most of our audience won't notice it anyway. 

[Mardk]

...natawa ako, no offense ha, i just imagined how fast your foot should be
parang fast picking using the foot, dapat ba up down ang pattern?

none taken.  Kelangan may pitik sa toesy woesy.

[arcangelmorris]

Medyo malabo ang tanong mo bro pero if I understand it this way, paano ka makakalipat ng patch 3 BANK 5 na hindi tumutunog ang na save mong patches sa BANK 2, 3, & 4, ganun ba yon?

Exactly. This is my question mga Sir, sorry if di ko masyadong natanong ng mas malinaw.

ganito kasi yun, Im upgrading to gt10 soon, my very first multifx pedal was a zoom 505II, a had no problem switching from ..say for example from bank A patch 1 to any patch in bank 3 na hindi na tumotunog yung other patch na nadadaanan ko until I wanted it to (done this by stepping on both switches at the same time then go UP or DOWN looking for the particular patch I wanna use, then step at both switch again to engage the selected patch), sadly nasira na yung zoom, I then got the digitech RP90, ito na my problem occurred, its not possible to bypass any patch, hassle kasi pag you're in bitween a song tapos gusto mo lumipat ng patch na mejo malayo mo na save, tutunog yung ibang patch na nadadaanan..

Thank you po sa lahat ng nag reply

[rogeryu]

Exactly. This is my question mga Sir, sorry if di ko masyadong natanong ng mas malinaw.

ganito kasi yun, Im upgrading to gt10 soon, my very first multifx pedal was a zoom 505II, a had no problem switching from ..say for example from bank A patch 1 to any patch in bank 3 na hindi na tumotunog yung other patch na nadadaanan ko until I wanted it to (done this by stepping on both switches at the same time then go UP or DOWN looking for the particular patch I wanna use, then step at both switch again to engage the selected patch), sadly nasira na yung zoom, I then got the digitech RP90, ito na my problem occurred, its not possible to bypass any patch, hassle kasi pag you're in bitween a song tapos gusto mo lumipat ng patch na mejo malayo mo na save, tutunog yung ibang patch na nadadaanan..

Thank you po sa lahat ng nag reply

Sir,
page 72 of GT10 manual Setting the Timing Used for Switching Patches (Bank Change Mode)
This sets the timing with which the GT-10 switches to the next patch when switching banks with the pedals.

Select the Wait

Wait===Although the indication in the display is updated to reflect the change in the bank when a BANK pedal is pressed, the patch will not change. The patch changes when a number pedal is pressed.

Immed=== The patch switches instantly when a BANK pedal or any of the number pedals is pressed.

[esteban4377]

Sir,
page 72 of GT10 manual Setting the Timing Used for Switching Patches (Bank Change Mode)
This sets the timing with which the GT-10 switches to the next patch when switching banks with the pedals.

Select the Wait

Wait===Although the indication in the display is updated to reflect the change in the bank when a BANK pedal is pressed, the patch will not change. The patch changes when a number pedal is pressed.

Immed=== The patch switches instantly when a BANK pedal or any of the number pedals is pressed.

what are the types of Delay in GT10 ..may modulation ba sya ?kaya nya ba pagsabayin 3 types of delay?such as dotted 8 and quarter note ? thanks

[Super BisDak]

^these are the types of delay bro: single, pan, stereo, dual-series, dual-parallel, dual (L/R), reverse, analog, tape, warp, and modulate.

yes, pwede pagsabayin ang dotted 8th and quarter note. you can do that by using the dual (L/R) delay, just set the delay time let say the dotted 8th on the left channel and quarter on the right and that's it.

[raBid]

Mga kapatid tanong ko lang kung may function sa gt10 na pwede mo i bypass yung preamp ng amp kung naka 4CM ang set up. Parang function sa rp1000. Para pwede ka mag switch from your own amps preamp to the gt10 amp modelling. Thanks in advance

[raikidoodles]

Mga kapatid tanong ko lang kung may function sa gt10 na pwede mo i bypass yung preamp ng amp kung naka 4CM ang set up. Parang function sa rp1000. Para pwede ka mag switch from your own amps preamp to the gt10 amp modelling. Thanks in advance

actually you on/off switch ang pre amp nya,  kaya lang (sorry a little stupid)  kapag naka-off ba sya is automatically bypassed na ang pre amp?  pls answer roger yu

[raBid]

2 days pa lang sa akin yung gt10. Di ko pa matweak masyado. I'm using a marshall jtm 60. Masyadong trebly yung sound with the gt10. Research pa ko konti about tips to get the most out of the gt. So far I'm liking the idea of having two channels in one patch. Single patch pa lang pwede na ko mabuhay hehehe . Pati yung manual mode ok, medyo nasanay na kasi ako ng stompboxes. Ngayon na lang ulit ako bumalik sa mfx

[esteban4377]

^these are the types of delay bro: single, pan, stereo, dual-series, dual-parallel, dual (L/R), reverse, analog, tape, warp, and modulate.

yes, pwede pagsabayin ang dotted 8th and quarter note. you can do that by using the dual (L/R) delay, just set the delay time let say the dotted 8th on the left channel and quarter on the right and that's it.

salamat..how about may setting na .8 then gagawin mong tap tempo?i mean naka set sya sa dotted 8 then itatap mo ?ive seen it in boss me70,do gt10 has a features like this >?thank you again

[Super BisDak]

^yes bro, you can do that on gt-10 too.

[raBid]

Need help with the ctrl switch bros. I assigned the ctrl 2 pedal for manual mode but everytime I press it automatic din nag o-on yung delay . How can I assign it for manual mode only. Thanks in advance guys

[raBid]

I figured it out . Thanks anyway bros