hulika

Author Topic: Line 6 Helix & Pod HD300/400/500/500x users thread!!!  (Read 466695 times)

Offline incubus32

  • Forum Fanatic
  • ****
Re: Line 6 Pod HD500/400/300 users thread!!!
« Reply #425 on: July 29, 2011, 04:05:04 AM »
thanks xelly :)

about sa trails, gumagana siya sa manual mode lang, its the same sa newer boss mfx, pero try mo ung lumang boss. sana magawa ng line 6 na sa patch select lumilipat pa din ang delays.. haha

Nabasa ko yung ganitong issue sa line 6 Forum, wala talagang Delay Trails if you'll gonna change from patch to patch, yung spillover lang ng delay is By 1 patch alone.

Offline sidlead66

  • Veteran Member
  • ****
Re: Line 6 Pod HD500/400/300 users thread!!!
« Reply #426 on: July 29, 2011, 05:59:43 AM »
Nabasa ko yung ganitong issue sa line 6 Forum, wala talagang Delay Trails if you'll gonna change from patch to patch, yung spillover lang ng delay is By 1 patch alone.

true bro, i recalled even the boss me30 and 33's has delay spillover from patch to patch given that you have enabled the delay effect on your next patch as well
www.soundclick.com/sidpablo<br /><br />\\\\\\\\\\\\\\\"Sidlead66\\\\\\\\\\\\\\\" on Youtube :)

Offline incubus32

  • Forum Fanatic
  • ****
Re: Line 6 Pod HD500/400/300 users thread!!!
« Reply #427 on: July 29, 2011, 06:10:29 AM »
true bro, i recalled even the boss me30 and 33's has delay spillover from patch to patch given that you have enabled the delay effect on your next patch as well

yeah, galing ako sa boss me-33... but mas ok na yung ganito, kasi, walang kasing bilis mgpalit ng patch tong HD500. unlike Me-30 and Me-33, parang may mili-seconds gap, which is annoying for me.. ;)

Offline sidlead66

  • Veteran Member
  • ****
Re: Line 6 Pod HD500/400/300 users thread!!!
« Reply #428 on: July 29, 2011, 03:06:21 PM »
fn a bro! cheers.. long live boss me33's haha (no offense on line6 users, that includes me)
www.soundclick.com/sidpablo<br /><br />\\\\\\\\\\\\\\\"Sidlead66\\\\\\\\\\\\\\\" on Youtube :)

Offline sidlead66

  • Veteran Member
  • ****
Re: Line 6 Pod HD500/400/300 users thread!!!
« Reply #429 on: July 31, 2011, 04:26:56 PM »
im posting my pod hd 500 on ebay as it seems like the UI is not friendly to me, and the HD300 seems to be more appropriate. :p

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=220822324800&ssPageName=STRK:MESELX:IT
www.soundclick.com/sidpablo<br /><br />\\\\\\\\\\\\\\\"Sidlead66\\\\\\\\\\\\\\\" on Youtube :)


Offline mustaine_factor

  • Senior Member
  • ***
Re: Line 6 Pod HD500/400/300 users thread!!!
« Reply #430 on: August 02, 2011, 12:45:57 PM »
I just got my POD HD300...  :evil:

I know HD500 is a monster, but HD300 would do ok for me, considering its benefits:price ratio.  :evil:
Guitars: Dean Mustaine VMNT (SD Mustaine LiveWire), Jackson Stars Neck-Thru KV-J2K (EMG 81/60), ESP-LTD EX-400 (EMG 81/60 18v)
Processors: Line6 PODHD300, Line6 Floor POD
Amps: Line6 Spider IV 75 w/ FBV2 Footswitch

Offline sidlead66

  • Veteran Member
  • ****
Re: Line 6 Pod HD500/400/300 users thread!!!
« Reply #431 on: August 02, 2011, 07:33:55 PM »
I just got my POD HD300...  :evil:

I know HD500 is a monster, but HD300 would do ok for me, considering its benefits:price ratio.  :evil:

right on!
www.soundclick.com/sidpablo<br /><br />\\\\\\\\\\\\\\\"Sidlead66\\\\\\\\\\\\\\\" on Youtube :)

Offline basket

  • Regular Member
  • ***
Re: Line 6 Pod HD500/400/300 users thread!!!
« Reply #432 on: August 02, 2011, 08:13:27 PM »
I just got my POD HD300...  :evil:

I know HD500 is a monster, but HD300 would do ok for me, considering its benefits:price ratio.  :evil:
Congratulations bro!!! :-) Dont forget to update the firmware!! :wink:

Offline Xelly

  • Philmusicus Addictus
  • *****
Re: Line 6 Pod HD500/400/300 users thread!!!
« Reply #433 on: August 03, 2011, 01:15:00 AM »
I just got my POD HD300...  :evil:

I know HD500 is a monster, but HD300 would do ok for me, considering its benefits:price ratio.  :evil:
Welcome sa mundo ng Pod HD bro!!! Post na ng recording!!! :-D

Offline pualux

  • Philmusicus Addictus
  • *****
Re: Line 6 Pod HD500/400/300 users thread!!!
« Reply #434 on: August 03, 2011, 01:26:58 AM »
sa gigs, pano niyo ginagamit yung POD HD? into amp? four cable method? straight to power amp? to house PA?

Offline Xelly

  • Philmusicus Addictus
  • *****
Re: Line 6 Pod HD500/400/300 users thread!!!
« Reply #435 on: August 03, 2011, 01:54:16 AM »
sa gigs, pano niyo ginagamit yung POD HD? into amp? four cable method? straight to power amp? to house PA?
Para sa akin bro depende sa kung anong pwede ibigay ng supplier. Pero pinaka-solve sa akin in terms of tone is straight to PA. Pinakamadali naman(or kapag tinatamad na ako) is straight to amp. So sa HD500 ko may directory ako na lahat ng patches ko is tweaked na pang straight to PA tapos may isa nanamang directory na straight to amp. May one time may gig ako na isa lang guitar amp eh dalawa kaming guitarista. Ayun buti may malaking keyboard amp dun ako sumaksak solve!!! Basta kailangan mo lang maisetup ng tama yung settings ng HD500 mo ayon sa kung anong setup gusto mo. Hopefully nakatulong. :-)

Offline rednas

  • Forum Fanatic
  • ****
Re: Line 6 Pod HD500/400/300 users thread!!!
« Reply #436 on: August 03, 2011, 05:15:20 AM »
Quote
sa gigs, pano niyo ginagamit yung POD HD? into amp? four cable method? straight to power amp? to house PA?

I use it mostly straight to amps/power amps, but from time to time - if we employ more instruments (wind, other string instruments), I go straight to PA.  Ang problema sa direct to PA, di mo masyado "feel" yung tone through the monitors, iba pa rin pag may amp na maingay at tumutulak.  But for the audience, it's easier on the ears, and for good sound techs, it's easier to adjust.  Bottomline - your application, your choice.

And yeah, you have to change the settings (there are also switches where you select - live, studio amp etc..) you can tweak to your preference.
“The aim and final end of all music should be none other than the glory of God and the refreshment of the soul.” - J.S. Bach

Music Furniture

Offline mustaine_factor

  • Senior Member
  • ***
Re: Line 6 Pod HD500/400/300 users thread!!!
« Reply #437 on: August 03, 2011, 11:48:02 AM »
Congratulations bro!!! :-) Dont forget to update the firmware!! :wink:

Yes I did that on my first hour of using it. Very nice!

Welcome sa mundo ng Pod HD bro!!! Post na ng recording!!! :-D

Sure, that's what I intend to do. Pero I have a noob question, what software do you use to do recording while your PODHD is connected to your computer (through the USB cable)? Is Garageband good enough?

Thanks a lot! I think I am in the right place (this thread).
Guitars: Dean Mustaine VMNT (SD Mustaine LiveWire), Jackson Stars Neck-Thru KV-J2K (EMG 81/60), ESP-LTD EX-400 (EMG 81/60 18v)
Processors: Line6 PODHD300, Line6 Floor POD
Amps: Line6 Spider IV 75 w/ FBV2 Footswitch

Offline Xelly

  • Philmusicus Addictus
  • *****
Re: Line 6 Pod HD500/400/300 users thread!!!
« Reply #438 on: August 03, 2011, 11:58:00 AM »
Yes I did that on my first hour of using it. Very nice!

Sure, that's what I intend to do. Pero I have a noob question, what software do you use to do recording while your PODHD is connected to your computer (through the USB cable)? Is Garageband good enough?

Thanks a lot! I think I am in the right place (this thread).
Ok na yung garage band bro. MasOK ngayon naglabas ata yung line6 ng bagong driver na compatible for Mac users. :-)

Offline mustaine_factor

  • Senior Member
  • ***
Re: Line 6 Pod HD500/400/300 users thread!!!
« Reply #439 on: August 03, 2011, 12:07:21 PM »
Ok na yung garage band bro. MasOK ngayon naglabas ata yung line6 ng bagong driver na compatible for Mac users. :-)

Thanks a lot! Yup installed na po ang bagong driver. Sige I'll play around with my new toy this weekend.

Kudos nga pala to Sir Mon Sebastian (Moncseb Guitars) for this excellent item!
Guitars: Dean Mustaine VMNT (SD Mustaine LiveWire), Jackson Stars Neck-Thru KV-J2K (EMG 81/60), ESP-LTD EX-400 (EMG 81/60 18v)
Processors: Line6 PODHD300, Line6 Floor POD
Amps: Line6 Spider IV 75 w/ FBV2 Footswitch

Offline sidlead66

  • Veteran Member
  • ****
Re: Line 6 Pod HD500/400/300 users thread!!!
« Reply #440 on: August 03, 2011, 03:42:45 PM »
shet nagtaas presyo ng hd 500, have to retract! sayang e. hahahaha
www.soundclick.com/sidpablo<br /><br />\\\\\\\\\\\\\\\"Sidlead66\\\\\\\\\\\\\\\" on Youtube :)

Offline Xelly

  • Philmusicus Addictus
  • *****
Re: Line 6 Pod HD500/400/300 users thread!!!
« Reply #441 on: August 03, 2011, 05:45:14 PM »
shet nagtaas presyo ng hd 500, have to retract! sayang e. hahahaha
Paanong nagtaas presyo sir?

Offline sidlead66

  • Veteran Member
  • ****
Re: Line 6 Pod HD500/400/300 users thread!!!
« Reply #442 on: August 03, 2011, 08:50:57 PM »
nagtaas ng almost 20 percent street price ng hd, di ko alam kung bakit, kaya mabenta ko man hd500 konti lang masasave ko para sa hd300, pretty much pointless kapatid. HUHU.

maybe its because bumaba na naman US dollars? i dunno
www.soundclick.com/sidpablo<br /><br />\\\\\\\\\\\\\\\"Sidlead66\\\\\\\\\\\\\\\" on Youtube :)

Offline mustaine_factor

  • Senior Member
  • ***
Re: Line 6 Pod HD500/400/300 users thread!!!
« Reply #443 on: August 04, 2011, 04:56:22 PM »
I have another noob question (been only a Line 6 user since Nov 2010):

Currently, whenever I use my POD HD300 with my Spider IV, I plug it on the CD/MP3 Line-In so to disable the modeling/amplification capabilities of the Spider IV. In other words, I am just merely using the Spider IV's celestion speaker and  that's all.

What I am thinking is that, instead of making my Spider IV practically useless, I wanted to set a channel on the Spider IV with a setting that is similar to the CD/MP3 Line-In (no amplification and modeling at all). I want this so that I can easily shift from using the POD HD300 to the other 3 channels of the Spider IV (and disabling the effects of POD HD300).

Your help will really be appreciated! Sorry rin if ever I used the wrong terms...
Guitars: Dean Mustaine VMNT (SD Mustaine LiveWire), Jackson Stars Neck-Thru KV-J2K (EMG 81/60), ESP-LTD EX-400 (EMG 81/60 18v)
Processors: Line6 PODHD300, Line6 Floor POD
Amps: Line6 Spider IV 75 w/ FBV2 Footswitch

Offline Xelly

  • Philmusicus Addictus
  • *****
Re: Line 6 Pod HD500/400/300 users thread!!!
« Reply #444 on: August 04, 2011, 06:24:58 PM »
I have another noob question (been only a Line 6 user since Nov 2010):

Currently, whenever I use my POD HD300 with my Spider IV, I plug it on the CD/MP3 Line-In so to disable the modeling/amplification capabilities of the Spider IV. In other words, I am just merely using the Spider IV's celestion speaker and  that's all.

What I am thinking is that, instead of making my Spider IV practically useless, I wanted to set a channel on the Spider IV with a setting that is similar to the CD/MP3 Line-In (no amplification and modeling at all). I want this so that I can easily shift from using the POD HD300 to the other 3 channels of the Spider IV (and disabling the effects of POD HD300).

Your help will really be appreciated! Sorry rin if ever I used the wrong terms...

Hindi ko lang sure bro sa Spider IV kung pwede mo ibypass yung amp sim nun para parang Line-in din yung setup pero in solve na talaga yung line-in nung Spider IV!! :-)

Offline mustaine_factor

  • Senior Member
  • ***
Re: Line 6 Pod HD500/400/300 users thread!!!
« Reply #445 on: August 04, 2011, 09:48:47 PM »
Hindi ko lang sure bro sa Spider IV kung pwede mo ibypass yung amp sim nun para parang Line-in din yung setup pero in solve na talaga yung line-in nung Spider IV!! :-)

Thanks sir, ikaw rin pala ang makakasagot dito, hehehe. Thanks again ng marami!
Guitars: Dean Mustaine VMNT (SD Mustaine LiveWire), Jackson Stars Neck-Thru KV-J2K (EMG 81/60), ESP-LTD EX-400 (EMG 81/60 18v)
Processors: Line6 PODHD300, Line6 Floor POD
Amps: Line6 Spider IV 75 w/ FBV2 Footswitch

Offline Xelly

  • Philmusicus Addictus
  • *****
Re: Line 6 Pod HD500/400/300 users thread!!!
« Reply #446 on: August 04, 2011, 10:08:06 PM »
May ibang HD300 users din jan hopefully magpost din sila ng suggestions nila. Anyways kung may setting yung harap ng Spider IV na pwedeng flat response na parang line-in ayun solve na!! :-)

Offline wagkangsabogBro

  • Philmusicus Noobitus
  • *
Re: Line 6 Pod HD500/400/300 users thread!!!
« Reply #447 on: August 07, 2011, 02:51:26 PM »
I just got my HD500 today and I dunno what to do!!!! sobrang overwhelmed ako... I'll get back to you guys pag may naencounter akong hindi ko alam gawin :-)

Offline Xelly

  • Philmusicus Addictus
  • *****
Re: Line 6 Pod HD500/400/300 users thread!!!
« Reply #448 on: August 09, 2011, 01:11:25 AM »
I just got my HD500 today and I dunno what to do!!!! sobrang overwhelmed ako... I'll get back to you guys pag may naencounter akong hindi ko alam gawin :-)
Yup bro yun ang nakakainis sa HD500 nakakaoverwhelm!!! :lol:

Offline incubus32

  • Forum Fanatic
  • ****
Re: Line 6 Pod HD500/400/300 users thread!!!
« Reply #449 on: August 09, 2011, 03:09:45 PM »
I just got my HD500 today and I dunno what to do!!!! sobrang overwhelmed ako... I'll get back to you guys pag may naencounter akong hindi ko alam gawin :-)

Ganito din ako nung una kong Tweak sa HD500 hahaha