CPU coolers

[xjepoyx]

I was thinking of going kanina pero I changed my mind. Naku baka maparami ang gas ko kasi dun pla ako dadalhin ng tadhana 

kung tpc user ka naman... they have special price for members sa PC HUB.

[pizarro84]

kung tpc user ka naman... they have special price for members sa PC HUB.

May account ka rin sir? madalas kami umoorder dun kay axlrose at kay raffy1919 

[jun_gats]

kung tpc user ka naman... they have special price for members sa PC HUB.

good to hear sir, member nga ako. sana may discount 

[KitC]

good to hear sir, member nga ako. sana may discount 

Depends on the item. I got 40 bucks off the chipset cooler I bought yesterday.

[jun_gats]

its not that much atleast may discount. sir i saw Scythe inifinity 3.3 price, it has a very good review but it weights 960g almost a kilo. can the mobo handle this weight? they also have a NINJA PLUS Rev.B @ 640g for 2.5

[KitC]

The Tt Big Typhoon weighs around 825 gms so it's not that far off (isang guhit?  ). I've been thinking of tying it to the case crossbar frame to ease tension on my mobo, but the backing plate on the mobo seems adequate enough. I'm afraid this will mean my pc won't be going anywhere from now on or I'll have to be extra careful when transporting it.

The Ninjas are good; I've been wanting a Scythe myself but jepoy's Typhoon was too good to pass off. My Beetle is happily resting - I want to operate on it since the blue leds in the body dimmed to almost nothing. The Arctic Freezer Pro is also a very good... it's the zalman 9700 that I want to see.

The CM Blue Ice Pro chipset cooler was P700 list so 40 bucks off meant a 5% discount - enough for a couple of sodas. Btw, I saw a CM GeminII over at PC Hub.

[pizarro84]

Mabibigat talgaga mga heatsink na yan, pagkakaalam ko po kasi copper din yung fins. Yung thermalright si128 namin 540g lang. Pero talaga namang malakas yang scythe infinity (nilalalgyan pa ng multi-fan yan ng mga hard core na air cooling enthusiasts). Siyempre malaking factor din yung fan na gamit mo (kung gusto mo magandang fan, yung silverstone FM121, controllable speed nya kaya pwede mo hinaan pag naingayan ka. Maganda pati design nya, high CFM@ low RPM) , yung intake-exhausts (kagaya ng nasabi previously) at siyempre yung thermal compound mo (the paste between the heatsink and processor heat spreader). Gamit kong thermal compound is either arctic silver 5 or yung sa zalman. hindi ko ginagamit yung stock na thermal compound nung heatsink.

Kuung mabitin ka pa sa infinity mag water cooling ka na 

[jun_gats]

The Ninjas are good; I've been wanting a Scythe myself but jepoy's Typhoon was too good to pass off. My Beetle is happily resting - I want to operate on it since the blue leds in the body dimmed to almost nothing. The Arctic Freezer Pro is also a very good... it's the zalman 9700 that I want to see.

The CM Blue Ice Pro chipset cooler was P700 list so 40 bucks off meant a 5% discount - enough for a couple of sodas. Btw, I saw a CM GeminII over at PC Hub.

Thank for another good tip. Sobrang bilis kasing mabenta ng magagandang parts sa TPC. I’ll go to PC Hub later and check out there products.

Mabibigat talgaga mga heatsink na yan, pagkakaalam ko po kasi copper din yung fins. Yung thermalright si128 namin 540g lang. Pero talaga namang malakas yang scythe infinity (nilalalgyan pa ng multi-fan yan ng mga hard core na air cooling enthusiasts). Siyempre malaking factor din yung fan na gamit mo (kung gusto mo magandang fan, yung silverstone FM121, controllable speed nya kaya pwede mo hinaan pag naingayan ka. Maganda pati design nya, high CFM@ low RPM) , yung intake-exhausts (kagaya ng nasabi previously) at siyempre yung thermal compound mo (the paste between the heatsink and processor heat spreader). Gamit kong thermal compound is either arctic silver 5 or yung sa zalman. hindi ko ginagamit yung stock na thermal compound nung heatsink.

So I need to change the fan pa pla kung mabitin ako. Pero ang problem is where can I buy those parts? I know liquid cooling is the best pero skeptic padin ako kasi I know one false move and I'll fry my pc

[pizarro84]

Sa tipidPC meron nung silverstone (nasa P900.00 yun), pero may naalala akong review na kinabitan nya ng dalawang low RPM fans yang scythe (minsan apat pa  ) both sides nung heatsink, na-outperform nya slightly yung high rpm fan. Actually may kasamang fan na yan, kung gusto mo lang mas malamig palitan mo. Or dagdagan mo na lang 

One thing pala sa ventilation, maganda kung ipa-butas mo case mo in proper places kung sakaling kulob talaga loob (sa tingin ko yun ang isang possible problem ng system mo). Kung mapapansin mo yung pic ng PC namin sa show me your PC thread, may intake fan yun sa front, dalawa, isang exhaust sa rear and sa side. Yung exhaust sa side labasan yun ng heat na generated ng video card na tinutulak naman nung lower front fan. Not to mention yung exhaust pa pala ng power suply..

[jun_gats]

Thanks sir pizzaro84. Ganun din yung placing ng vent ng casing ko sir. yung processor lng tlga problema. constant naman na 34c yung mobo temp. ito po casing ko sir acrylic sya kaya di sya masyado magegenerate ng heat. isang fan sa front, sa top, dalawa sa sides on top of the mobo at isa sa back katabi ng psu na may fan na 14cm.

[x_taxi]

Thanks sir pizzaro84. Ganun din yung placing ng vent ng casing ko sir. yung processor lng tlga problema. constant naman na 34c yung mobo temp. ito po casing ko sir acrylic sya kaya di sya masyado magegenerate ng heat. isang fan sa front, sa top, dalawa sa sides on top of the mobo at isa sa back katabi ng psu na may fan na 14cm.

acrylic doesn't feel hot cause it actually keeps the heat in.  plastic is a good insulation material.  so importante yun airflow to get the heat out.

you might want to check your cpu heatsink.  diba may pad yun bago ikabit?  baka di natanggal yun protective coverin nun nag-install.  or did you do it yourself?  helps to backtrack a bit.

 

[jun_gats]

acrylic doesn't feel hot cause it actually keeps the heat in.  plastic is a good insulation material.  so importante yun airflow to get the heat out.

you might want to check your cpu heatsink.  diba may pad yun bago ikabit?  baka di natanggal yun protective coverin nun nag-install.  or did you do it yourself?  helps to backtrack a bit.

 

thanks for the tip sir, i'll check it later. i'm pretty sure I have a good install since I was the one who built my pc from scratch. the only tricky part for me is the hsf pins, you need to make sure it locks. pero i'll still buy a cooler kasi medyo babad din ako gumamit para sure 

[pizarro84]

check mo lang yung orientation ng fans, dapat may intakes and exhausts, kung puro intake or puro exhaust kasi hindi magci-circulate ng maayos yung hangin.

[jun_gats]

sir apat pong intake, front, top, 2 side at 2 out 1 back at psu out.

[x_taxi]

sir apat pong intake, front, top, 2 side at 2 out 1 back at psu out.

try mo gawin out yun sa top.  usually blowhole yan.

 

[xjepoyx]

@jungats
also... try getting a thermal compound paste and apply it before installing you HSF

Btw, I saw a CM GeminII over at PC Hub.

buti na lang pala boss kit di ko pa muna binili yung nung bagong datin dito sa pinas coz it cost P3500 tapos ang mura ng benta ng pchub!

that will be my hsf for my C2D project DAW pc

i just got my Intel Quad Core Q6600 SLARC G0 stepping for 12.k only... kulang ko na lang mobo, mems and a PSU

[jun_gats]

try mo gawin out yun sa top.  usually blowhole yan.
 

Thanks sir xtaxi, nagcheck nako ng in at out the fans.

@jungats
also... try getting a thermal compound paste and apply it before installing you HSF
 

Thanks sir edgeofillusion-jepoy, ayus na nakabili nako pero iba ang nabili ko  40-48c nalang temp ng cpu ko.
Salamat sa lahat ang babait ninyo 

[pizarro84]

ayos! Gratz Bro 

[jun_gats]

thanks sir, laki tlga ng difference. Color coordination nalang ayus na 

[marzi]

^hehehe...parang disco na jan sir!

bakit wala nga pala akong nakitang nagbigay ng feedback sa mga Gigabyte products dito? di ba ok performance nun?

[jun_gats]

^^ wala po atang masyadong gumagamit ng  brand na yan dito... update ko lang po yung pc 

[KitC]

^^ wala po atang masyadong gumagamit ng  brand na yan dito...

Gigabyte? You sure? Lots of gigabyte users if you know where to look. Just try googling/searching "DQ6" in TPC.

[pizarro84]

Hmm.. gigabyte coolers ba ibig mo sabihin? kung coolers nga mejo madalang, pero sa mainboard at casing patok ang gigabyte. Yung casing nga lang nila mejo may kamahalan, pero sagad naman ang features. Mabigat din sa overclockan ang MB ng gigabyte..

^hehehe...parang disco na jan sir!

bakit wala nga pala akong nakitang nagbigay ng feedback sa mga Gigabyte products dito? di ba ok performance nun?

..

[marzi]

yes sires, Gigabyte products po...

napansin ko yung reviews nya sa mga tech sites na yung Neon Cooler Pro 8 ay maganda daw dahil effective na sa cooling ng processor, silent pa ang operation
at kaya nya din mapalamig yung mga surrounding components ng mobo..adjustable fan speed din shempre...good value po sya for 950 pesos...

sa mobos naman po, maganda din sila...i dont know if this is true but sabi ng kaofis ko, maganda daw yung capacitors ng mobo ay steel coated para pag uminit daw ay hindi masunog agad(normal capacitors are coated with this plastic, somewhat combustible material)

totoo ba yun?

[xjepoyx]

Gigabyte mobos are one of the most reliable brands.

So far only DFI and Gigabyte has "all" Solid capacitors installed (depende pa rin sa model). Even the ASUS mobos (commando, P5xx models) doesnt have "all" solid caps yet.

I myself is Eyeing for the Gigabyte P35 - DQ6 or the  DFI LanParty UT P35-T2R