Author Topic: Mang Raul and The works... (Read 72254 times)

r_chino18 · « **Reply #75 on:** April 13, 2010, 10:31:31 PM »

Quote from: smarty on April 13, 2010, 08:47:38 PM

sirs papost naman latest number ni mang raul, sayng yung pathfinder ko asa isang sulok lang e

why? anong problema nung PF?

guitarmaniacgino · « **Reply #76 on:** April 16, 2010, 10:34:18 PM »

Pa PM naman ng Latest Contact details and address.

May ipapaayus sana ako na tube amp.

smarty · « **Reply #77 on:** April 19, 2010, 10:54:06 PM »

Quote from: r_chino18 on April 13, 2010, 10:31:31 PM

why? anong problema nung PF?

nasunog yung orignal speaker, naparewind ilang minutes lang sunog ulit. ipina-ayos ko dito sa probinsya, and replace the speaker galing raon, gumana naman pero ang pangit ng sound parang lata ang tunog, kaya itinabi na muna. test it lately ayaw na ulit gumana.

redballs17 · « **Reply #78 on:** April 20, 2010, 01:34:44 PM »

Quote from: smarty on April 19, 2010, 10:54:06 PM

nasunog yung orignal speaker, naparewind ilang minutes lang sunog ulit. ipina-ayos ko dito sa probinsya, and replace the speaker galing raon, gumana naman pero ang pangit ng sound parang lata ang tunog, kaya itinabi na muna. test it lately ayaw na ulit gumana.

sir. try mo palitan ng ibang speaker (celestions, eminence, etc...).

dr_randy · « **Reply #79 on:** April 20, 2010, 10:13:39 PM »

Quote from: BAMF on July 21, 2008, 10:02:56 PM

An anectdote.

I was repairing this DS-1. I looked at it for two days almost straight...di ko mahuli ang sira. I had all the schems and readouts. My kuya (the original ECE in the family) looked at it for two hours and couldn't find the problem.

Kaya "call a friend" na ko, pinapunta ko si Mang Raul to fix it (marami namang ipapagawa sa kanya, di lang yun). It took him all of 20 minutes to find the problem. A broken resistor, literally broken, invisible to the naked eye. Put...

It should mean something when a fellow electronics professional says it: Mang Raul is the MAN !

Correct! He really is THE MAN! I honestly don't know what i'm going to do in case he retires. Give up i guess... Kailangan niya ng trainee na sasalo sa kanya!

jonathan_dead · « **Reply #80 on:** April 20, 2010, 11:02:46 PM »

Quote from: dr_randy on April 20, 2010, 10:13:39 PM

Correct! He really is THE MAN! I honestly don't know what i'm going to do in case he retires. Give up i guess... Kailangan niya ng trainee na sasalo sa kanya!

I guess it's a blessing in disguise ung reason why ko na meet in flesh si sir Raul...Nung una nalungkot ako kasi kelangan ko iparepair ung amp ko but na realize ko I just met a living legend when it comes sa musicians gear dito sa Pinas

nalu · « **Reply #81 on:** April 22, 2010, 11:34:44 PM »

nice thread guys!
mas komportable na kong mag-ipon para sa tube amp

yahoo! · « **Reply #82 on:** April 23, 2010, 01:48:55 AM »

saludo ako kay mang raul, marami akong natutunan when comes to repairs and debugging problems

audio deft · « **Reply #83 on:** April 23, 2010, 09:44:11 PM »

tanong ko lang guys kung kasali ang mga turntables sa mga pwedeng ayusing ni mang raul? anu ang existing number po nya? thanks

Mardk · « **Reply #84 on:** April 23, 2010, 09:54:56 PM »

Gusto ko tuloy palagyan ng effects loop yung Cub 10 ko. Hmm. How do we get in touch with the guy?

dr_randy · « **Reply #85 on:** April 25, 2010, 03:29:02 PM »

audio deft: dude malamang kaya din ayunsin ni kuya raul yung turntables kasi minsan nagpunta daw siya sa ABS-CBN para mag repair ng VIDEO CAMERAS. superman diba? hehehe! worth a try...

mardk: you can contact him at 0917-6431323 or 0915-5403403

ytse_neil · « **Reply #86 on:** April 25, 2010, 08:11:59 PM »

Sir question lang.. May nagpacustom na ba ng Tube Amp dito kay Mang Raul? Kasama na ba speaker kapag nagpagawa ka? Balak ko kasi magpagawa ng 30w or 50w tube amp sa kanya.. Thanks...

melody_guitar · « **Reply #87 on:** April 26, 2010, 01:34:14 AM »

Quote from: BAMF on July 21, 2008, 10:02:56 PM

An anectdote.

I was repairing this DS-1. I looked at it for two days almost straight...di ko mahuli ang sira. I had all the schems and readouts. My kuya (the original ECE in the family) looked at it for two hours and couldn't find the problem.

Kaya "call a friend" na ko, pinapunta ko si Mang Raul to fix it (marami namang ipapagawa sa kanya, di lang yun). It took him all of 20 minutes to find the problem. A broken resistor, literally broken, invisible to the naked eye. Put...

It should mean something when a fellow electronics professional says it: Mang Raul is the MAN !

paano natrace ni mang raul yung bad resistor na yun???

renz13 · « **Reply #88 on:** November 03, 2010, 08:30:10 PM »

up

mga ilang buwan inaabot ang mag pa gawa ng amp kay mang raul?

Xelly · « **Reply #89 on:** November 04, 2010, 01:46:52 AM »

Sino may contact kay Mang Raul? Ang alam ko mahirap ngayon macontact si Mang Raul eh.

ermonski · « **Reply #90 on:** June 12, 2011, 11:59:09 AM »

tiga saan po si Mang Raul? I want my Laney HCM30 repaired and optimized hehe

mrbrownstone · « **Reply #91 on:** June 12, 2011, 12:45:37 PM »

Quote from: ytse_neil on April 25, 2010, 08:11:59 PM

Sir question lang.. May nagpacustom na ba ng Tube Amp dito kay Mang Raul? Kasama na ba speaker kapag nagpagawa ka? Balak ko kasi magpagawa ng 30w or 50w tube amp sa kanya.. Thanks...

He makes heads only so you have to have a cab. its not a big issue though, as e makes real neat point to point wiring.

quaternotetriplet · « **Reply #92 on:** June 12, 2011, 02:01:14 PM »

Quote from: mrbrownstone on June 12, 2011, 12:45:37 PM

He makes heads only so you have to have a cab. its not a big issue though, as e makes real neat point to point wiring.

un nga problema chasis lang.. dapat pati house lang nung amp head..

nag pagawa ako sakanya sounds good.. pero look like prototype.

ytse_neil · « **Reply #93 on:** June 12, 2011, 05:33:14 PM »

Quote from: mrbrownstone on June 12, 2011, 12:45:37 PM

He makes heads only so you have to have a cab. its not a big issue though, as e makes real neat point to point wiring.

Thanks for the response sir... Balak ko kasi bibili ako ng amp na surplus tapos papagawa ako ng amp kay Mang Raul..

pings15 · « **Reply #94 on:** June 12, 2011, 08:38:42 PM »

I had my 5150 modded by mang raul,
its a 120 watt before now it can now be switched to 60 or 120 watts.

flawless work!!

giftmones · « **Reply #95 on:** June 12, 2011, 11:10:02 PM »

gumagawa ba ng cab si mang Raul?

meron kasi ako ditong chasis ng amp, bibilan na lang ng speaker na maganda, dati syang amp pero nasira coconvert lang na extension cabinet. need ko kasi ng extension cab para sa laney cub.

kaya ba ito ni mang raul?

lordpogi · « **Reply #96 on:** June 13, 2011, 01:05:28 AM »

Steeeg!

mrbrownstone · « **Reply #97 on:** June 14, 2011, 08:16:21 PM »

Quote from: ytse_neil on June 12, 2011, 05:33:14 PM

Thanks for the response sir... Balak ko kasi bibili ako ng amp na surplus tapos papagawa ako ng amp kay Mang Raul..

That's the way to go bro. I know someone who bought a marshall combo and had the circuit changed to mang raul's.

brandey · « **Reply #98 on:** June 15, 2011, 08:10:49 AM »

Ok talaga tong si Mang Raul. Naka ilang repairman na rin ang napuntahan ko para mapagawa ang Marshall 8080 ko. Sinilip lang niya nakuha niya kaagad ang sira. Home service pa. Idol talaga to

mrbrownstone · « **Reply #99 on:** June 16, 2011, 12:11:49 AM »

Quote from: didi09 on June 12, 2011, 11:10:02 PM

gumagawa ba ng cab si mang Raul?

meron kasi ako ditong chasis ng amp, bibilan na lang ng speaker na maganda, dati syang amp pero nasira coconvert lang na extension cabinet. need ko kasi ng extension cab para sa laney cub.

kaya ba ito ni mang raul?

Kayang kaya, in fact he learned how to make cabs when he was a kid. I sometimes have him repair the tolex and hardware of my amps

News:

Author Topic: Mang Raul and The works... (Read 72254 times)