Author Topic: YOUR PEDALBOARD THREAD - PART II (Read 1664075 times)

nalu · « **Reply #125 on:** June 29, 2010, 06:18:58 AM »

Quote from: bazgrol0413 on June 29, 2010, 12:11:50 AM

sir how's the analogman mini chorus? thinking of gettin one.

It's very warm and full, very analog in characteristics. No noise or hiss. With only 2 knobs for parameters (+1 for the mix knob), it's very easy to use. The sweep and range of the speed and depth knobs are very useable. I use it to thicken up my clean sounds and it's pretty good at it.

shredmaestrobri · « **Reply #126 on:** June 29, 2010, 10:08:02 AM »

Quote from: Gibson78 on June 28, 2010, 02:41:41 PM

It's actually a Halophaze. Still on the waiting list for an Echoczar.

Cheers and Beers!

Musta Openhaus?

masterjeremiah14 · « **Reply #127 on:** June 29, 2010, 10:52:32 AM »

Quote from: r_chino18 on June 28, 2010, 04:58:45 PM

^^^

sir.. i like your pedalboard setup.. portable and very gig worthy.. simple lang pero maganda ang laman..

salamat!!!

next gas,, maybe a PT jr or guitar upgrade or an amp or a distortion. whaaaaa GAS never ends!!!

JoeF · « **Reply #128 on:** June 29, 2010, 11:11:47 AM »

Quote from: musicjunkie on June 28, 2010, 04:03:07 PM

i love this board. full of vintage goodness.

Is that ab Ibanez AD80? How does it sound like?

It's an Maxon AD80. It has the same innards as the Ibanez. Sounds awesome on everything!

I wish I could get another one.

erniepaj · « **Reply #129 on:** June 29, 2010, 01:27:31 PM »

guys:
please help me come up with a proper sequence of things here.
you advice will be welcome:

>DOD Compressor
>Marshall Jackhammer JH1
>Rebote 2.5 Delay
>Behringer Ultrametal UM300
>Behringer Spectrum Enhancer SE200
>Boston Noisegate NG100
>GTX Equalizer
>Danelectro FAB Flanger
>Arctec Vintage Tremolo
>Behringer GDI21
>DIY MXR Distortion+
>VOX Satchurator

thanks in advance.

diaboliche · « **Reply #130 on:** June 29, 2010, 02:23:13 PM »

Quote from: sick_angel14 on June 29, 2010, 12:50:36 AM

pasali mga sir hope pede na ung sakin

Nice.

maxi_musikero · « **Reply #131 on:** June 29, 2010, 03:31:16 PM »

Quote from: gainsucker on June 28, 2010, 09:56:56 PM

naubusan ako ng patch cable

kala ko may special reason.

Quote from: gainsucker on June 28, 2010, 09:56:56 PM

any suggestions on how i should arrange the pedals?

i believe the arrangement is OK. for the drives, the main ovedriven voice you want to hear should be nearest the amp. using your board as an example, if you turn all your ODs on, the zendrive's voice will prevail over the BB preamp and the J&H.

lykenhowl · « **Reply #132 on:** June 29, 2010, 06:36:23 PM »

Here's mine

haxo55 · « **Reply #133 on:** June 29, 2010, 08:21:34 PM »

Quote from: lykenhowl on June 29, 2010, 06:36:23 PM

Here's mine

gusto ko yung nobels pedal hehe

plugzzzz · « **Reply #134 on:** June 29, 2010, 08:23:47 PM »

Quote from: lykenhowl on June 29, 2010, 06:36:23 PM

Here's mine

pros vox tube pedals ha patry ng setup mo

lykenhowl · « **Reply #135 on:** June 29, 2010, 09:16:49 PM »

Quote from: plugzzzz on June 29, 2010, 08:23:47 PM

pros vox tube pedals ha patry ng setup mo

Sure bro, basta makahanap lang ako ng timing... busy lang talaga sa office ngayon dahil sa mga boss na puti kahit pagpunta ko ng Baguio kasama sila haha! Yung eruption ko steady lang muna jan hehe.

incubus32 · « **Reply #136 on:** June 30, 2010, 12:52:13 AM »

Quote from: sikheadzraf on June 29, 2010, 03:34:43 AM

papost ulit.. part 2 na pala ang pedalboard thread. hehe

update:

added a looper and a PSU

ADIK TONG TAONG TO! hahaha apir raf!!

erniepaj · « **Reply #137 on:** June 30, 2010, 03:24:13 AM »

guys:
please help me come up with a proper sequence of things here.
you advice will be welcome:

>DOD Compressor
>Marshall Jackhammer JH1
>Rebote 2.5 Delay
>Behringer Ultrametal UM300
>Behringer Spectrum Enhancer SE200
>Boston Noisegate NG100
>GTX Equalizer
>Danelectro FAB Flanger
>Arctec Vintage Tremolo
>Behringer GDI21
>DIY MXR Distortion+
>VOX Satchurator
>Looper DIY

thanks in advance.

sikheadzraf · « **Reply #138 on:** June 30, 2010, 05:42:40 AM »

Quote from: incubus32 on June 30, 2010, 12:52:13 AM

ADIK TONG TAONG TO! hahaha apir raf!!

haha thx ayuz!! ang alam ko mas adik ka sakin! apir!!
looking forward for your GAS this season. rawk!

ingcokevin · « **Reply #139 on:** June 30, 2010, 06:38:03 PM »

cayle · « **Reply #140 on:** June 30, 2010, 06:54:29 PM »

^^
What's the pedal beside the PSU and the Space Echo?

lykenhowl · « **Reply #141 on:** June 30, 2010, 08:46:20 PM »

Quote from: cayle on June 30, 2010, 06:54:29 PM

^^
What's the pedal beside the PSU and the Space Echo?

Looks like a repainted satchurator.

cayle · « **Reply #142 on:** June 30, 2010, 08:53:48 PM »

Quote from: lykenhowl on June 30, 2010, 08:46:20 PM

Looks like a repainted satchurator.

Nope. Led placing is off. There's no VOX logo etched on the enclosure. There's no toggle switch beside one knob. The output jacks are on top...Nope, that's not a satch pedal.