Author Topic: Before and After Thread (Read 30304 times)

pmack · « **Reply #75 on:** September 12, 2009, 09:41:10 PM »

nice!

intake · « **Reply #76 on:** September 13, 2009, 05:09:45 AM »

ako lang ba o nilagyan mo ng fade? if so..ang galing!

Riff_6603 · « **Reply #77 on:** September 13, 2009, 06:08:50 AM »

Quote from: intake on September 13, 2009, 05:09:45 AM

ako lang ba o nilagyan mo ng fade? if so..ang galing!

may fade effect nga bro.. gawa kaya ako ng burst.. hhmm.. bagong project.. hanap muna ako shells

pedros_canabis · « **Reply #78 on:** September 13, 2009, 11:31:46 AM »

Quote from: intake on September 13, 2009, 05:09:45 AM

ako lang ba o nilagyan mo ng fade? if so..ang galing!

Nilagyan ko po Sir ng fade. Gusto ko sana ng burst pero parang diskompyado ako sa kamay ko.

Tatlong kulay ang gagamitin. Pagnagkamali, have to sand it down sa umpisa. Naalala ko, nun nagkamali ako sa pagpintura ng fade effect, nun hindi ko nagustuhan, sinand ko agad after painting without waiting it to dry. Ayun, parang ngsmudge pa un paint. Para siyang rubbery texture nun sinasand ko na mas lalo pang pumangit.

Kaya, lesson learned, wait till the paint dries before sanding.

I chose a dark color for fade effect close to to the primary color. Crappy talaga ang itsura but thats the closest thing I can do.

The shells are an old Yupangco MusicMate 90's circa.

drumachine · « **Reply #79 on:** September 13, 2009, 03:09:42 PM »

ganda ng pagkafade bro. gusto ko sana gawin sa kit ko kaso mas trip ko sa mejo mid-end na kits na lang apag nag-upgrade ako.

taiga_aisaka · « **Reply #80 on:** September 13, 2009, 06:39:58 PM »

Question po matagal ko na tong balak, gusto kong pinturahan ng itim yung hardware ng kit ko yung matte ang dating kasi kalawang na, ok ba ang spray paint? sabi ng friend ko wag daw i-WD40 ba yun nalang daw pero parang maganda kasi pag itim won't have to keep it shiny&clean all the time diba. What would you suggest na magandang paint? And how to do it right, like anung prep ang gagawin. Maraming salamat sa sasagot ng tanong ko

Eto po sya:

drumachine · « **Reply #81 on:** September 13, 2009, 08:21:33 PM »

ipa-powder coat mo na lang. pag spray paint kasi for sure magchi-chip yun.

irajames · « **Reply #82 on:** September 14, 2009, 12:20:23 PM »

eto nahanap kong vid sa pag paint ng burst. hope this helps

paeng16 · « **Reply #83 on:** September 14, 2009, 07:23:42 PM »

Quote from: taiga_aisaka on September 13, 2009, 06:39:58 PM

Question po matagal ko na tong balak, gusto kong pinturahan ng itim yung hardware ng kit ko yung matte ang dating kasi kalawang na, ok ba ang spray paint? sabi ng friend ko wag daw i-WD40 ba yun nalang daw pero parang maganda kasi pag itim won't have to keep it shiny&clean all the time diba. What would you suggest na magandang paint? And how to do it right, like anung prep ang gagawin. Maraming salamat sa sasagot ng tanong ko
Eto po sya:

Hwag mo nang pinturahan... masira mo pa yan!!

maganda naman ang STOCK look ah!!! Hwag na men... Pearl naman set mo eh... oks na yan..

pedros_canabis · « **Reply #84 on:** September 21, 2009, 09:17:41 PM »

Kit in progress....

Plan to change all the lugs. Awaiting for the heads I ordered sa ibang bansa. Pati din mga plato, sana may pera na.

irajames · « **Reply #85 on:** September 21, 2009, 09:34:15 PM »

that's a nice kit!

oh btw update ko sa project ko. I'm gonna have someone else to paint my kit for me. pero ung colors ako na bahala. i'm thinking about white and black burst.

pedros_canabis · « **Reply #86 on:** September 21, 2009, 09:45:44 PM »

Ayus yan Sir. If you have the bucks to pay for the labor, ok lang.

drumachine · « **Reply #87 on:** September 22, 2009, 01:43:35 AM »

galing guys! clapclap! working na din ako sa kit ko. pero wrap lang. wood stain ba yung inner side sir pedros?

pedros_canabis · « **Reply #88 on:** September 22, 2009, 07:40:42 AM »

Quote from: drumachine on September 22, 2009, 01:43:35 AM

galing guys! clapclap! working na din ako sa kit ko. pero wrap lang. wood stain ba yung inner side sir pedros?

Yes Sir. Ginamit ko Zar wood stain.

drumachine · « **Reply #89 on:** September 23, 2009, 11:09:51 PM »

Quote from: pedros_canabis on September 22, 2009, 07:40:42 AM

Yes Sir. Ginamit ko Zar wood stain.

meron din sya top coat sir? parang mukang glossy kasi eh.

pedros_canabis · « **Reply #90 on:** September 24, 2009, 06:40:09 AM »

Wala siyang top coat. Probably, sa camera o sa oil niya kaya parang shiny.

paeng16 · « **Reply #91 on:** September 24, 2009, 08:43:09 AM »

Quote from: irajames on September 21, 2009, 09:34:15 PM

that's a nice kit!

oh btw update ko sa project ko. I'm gonna have someone else to paint my kit for me. pero ung colors ako na bahala. i'm thinking about white and black burst.

Fruit burst colors po!! Mas ok!!

popsicle · « **Reply #92 on:** September 24, 2009, 10:32:18 AM »

Quote from: pedros_canabis on September 21, 2009, 09:17:41 PM

Kit in progress....

Plan to change all the lugs. Awaiting for the heads I ordered sa ibang bansa. Pati din mga plato, sana may pera na.

nakakainggit naman! gusto ko rin gawin sa kit ko yan! kaso malaking gastos i think???

pedros_canabis · « **Reply #93 on:** September 26, 2009, 10:24:33 PM »

Quote from: popsicle on September 24, 2009, 10:32:18 AM

nakakainggit naman! gusto ko rin gawin sa kit ko yan! kaso malaking gastos i think???

Malaking gastos Sir. Naghihingalo na pitaka ko.

josh17 · « **Reply #94 on:** September 30, 2009, 09:27:52 AM »

kelangan ba tatangalin k0 ung vinyl para marepaints sya ? hndi ba sya magmumukang pinunturahan lang na kahoy? pano ko ba mafifinish ng maganda ano2 kailangnan kong spray paint? mai kailangan bakong ipatong ? sa kahoy ng snare ko ?

irajames · « **Reply #95 on:** September 30, 2009, 07:09:31 PM »

Quote from: josh17 on September 30, 2009, 09:27:52 AM

kelangan ba tatangalin k0 ung vinyl para marepaints sya ? hndi ba sya magmumukang pinunturahan lang na kahoy? pano ko ba mafifinish ng maganda ano2 kailangnan kong spray paint? mai kailangan bakong ipatong ? sa kahoy ng snare ko ?

Yes tangalin mo ung wrap. hindi didikit ng matagal ung paint dun.

sa pag paint naman, first apply primer, tapos glossy (spray) paint. gawin mong multiple layers para makintab.

Riff_6603 · « **Reply #96 on:** September 30, 2009, 07:11:01 PM »

Quote from: josh17 on September 30, 2009, 09:27:52 AM

kelangan ba tatangalin k0 ung vinyl para marepaints sya ? hndi ba sya magmumukang pinunturahan lang na kahoy? pano ko ba mafifinish ng maganda ano2 kailangnan kong spray paint? mai kailangan bakong ipatong ? sa kahoy ng snare ko ?

YUP! kailangan mo tanggalin ung vinyl bro.. paints that are wood compatible magandang gamitin or better yet wood stain or tung oil meron sa wilcon.. tapos lacquer coating para kumintab and your all set..

josh17 · « **Reply #97 on:** September 30, 2009, 08:52:57 PM »

guys pwedi bang ipost nu dto un materials na kailangan at kung san nabibili salamt

pedros_canabis · « **Reply #98 on:** September 30, 2009, 10:12:48 PM »

Quote from: josh17 on September 30, 2009, 09:27:52 AM

kelangan ba tatangalin k0 ung vinyl para marepaints sya ? hndi ba sya magmumukang pinunturahan lang na kahoy? pano ko ba mafifinish ng maganda ano2 kailangnan kong spray paint? mai kailangan bakong ipatong ? sa kahoy ng snare ko ?

Yes, kelangan tanggalin ang vinyl wrap. I used a hair blower para lang lumambot yun glue that's sticking the vinyl wrap sa wood. Dahan-dahan lang sa pagtanggal para di masyadong ma-chip off yun wood. After stripping, sand the wood in preparation for applying the primer coat. It's your desire to choose from lacquer or polyurethane, and never apply lacquer to polyurethane or vice versa because there will be a reaction. I chose lacquer as primer, the color finish down to the clear coat.

Materials used: wood putty, different grits of sand paper, sand block, masking tape, lacquer spray paint (Pylox spray cans) - primer, chosen color and clear coat, Zar wood stain for the inner ply. You can buy these on different DIY shops (ACE hardwares, True Value, Wilcon, etc..)

josh17 · « **Reply #99 on:** September 30, 2009, 10:18:26 PM »

dami palang gastos tatry ko to ahha sana maging succesful ako sa gagawin ko dude thx man sa mga advice nyo

News:

Author Topic: Before and After Thread (Read 30304 times)