Author Topic: Cymbal Care and Maintenance thread (Read 151307 times)

tyrande101 · « **Reply #525 on:** March 11, 2011, 01:12:33 AM »

Mga poging philmusicians..

ok lang ba ang pagbu-buffing sa cymbals? kikintab kaya yun?

and another question is, may nabibili kayang logo sticker ng zildjian? and yung model yunit? kasi burado na ang K custom ride ko and baka may paraan pa para maibalik pa yun.. ganun na ganun yung sukat tska stile.. huhuhu T_T

killikillers · « **Reply #526 on:** March 15, 2011, 03:55:53 PM »

Quote from: tyrande101 on March 11, 2011, 01:12:33 AM

Mga poging philmusicians..

ok lang ba ang pagbu-buffing sa cymbals? kikintab kaya yun?

and another question is, may nabibili kayang logo sticker ng zildjian? and yung model yunit? kasi burado na ang K custom ride ko and baka may paraan pa para maibalik pa yun.. ganun na ganun yung sukat tska stile.. huhuhu T_T

oo kikintab yun, kaso lang magiging bright yung tunog ng cymbals mo
wag ka lang gagamit ng materials may chemical na makaka dry ng cymbals

afaik, walang nabibiling logo sticker ng zildjian PERO pwede ka mag DIY logo restoration

check mo itong thread na to, malaking tulong ito para sa mga gustong irestore/pagandahin/linisin yung mga cymbals nila

http://talk.philmusic.com/board/index.php/topic,10612.0.html

tom_morelo2001 · « **Reply #527 on:** March 31, 2011, 10:49:51 PM »

ung cymbals ko po top hihat nagkaron nun parang green na mantsa,pano ko po k un mttgal tnx po.

Riff_6603 · « **Reply #528 on:** April 02, 2011, 10:29:31 PM »

Quote from: tom_morelo2001 on March 31, 2011, 10:49:51 PM

ung cymbals ko po top hihat nagkaron nun parang green na mantsa,pano ko po k un mttgal tnx po.

patina yun due to oxidation. try mo gumamit ng cymbal cleaners, specifically groove juice. tiyagaang punas lang tanggal yan. iwasan mo na lang malagyan ng pawis yung pies mo para iwas tarnishing ulit.

tyrande101 · « **Reply #529 on:** April 02, 2011, 10:39:44 PM »

Quote from: Riff_6603 on April 02, 2011, 10:29:31 PM

patina yun due to oxidation. try mo gumamit ng cymbal cleaners, specifically groove juice. tiyagaang punas lang tanggal yan. iwasan mo na lang malagyan ng pawis yung pies mo para iwas tarnishing ulit.

In addition, palaging punasan ang mga cymbals after use, para mapunasan ung mga manti mantika from your fingers due to cymbal choking or pag hawak ng cymbals. And try to put several silica gels sa cymbal bag mo, para ma absorb ung mga moist na nag ca-cause ng oxidation sa cymbals.

Prevention is better than Cure

tyrande101 · « **Reply #530 on:** May 23, 2011, 12:25:32 AM »

well I maybe in a wrong thread (you may delete this or transfer to a right thread) but I think it can be one of a general question for me. Is this WipeOut cleaner not bad for cymbals? I mean, hindi ba siya nakaka nipis like other metal polisher? Kasi mejo nagiging routine ko na kasi sya na every time na gagamitin ko ang mga cymbals, afterwards pupunasan ko sila ng towel with wipeout..

music_en_sound · « **Reply #531 on:** June 03, 2011, 04:53:19 PM »

remedy for faded logos?

tyrande101 · « **Reply #532 on:** June 15, 2011, 10:14:58 AM »

Quote from: music_en_sound on June 03, 2011, 04:53:19 PM

remedy for faded logos?

sticker! pero I doubt kung may gumagawa non. Matagal ko na ring question yan eh..

mambo · « **Reply #533 on:** June 16, 2011, 07:45:47 PM »

Quote from: music_en_sound on June 03, 2011, 04:53:19 PM

remedy for faded logos?

I think a fellow forum member, Vhinming, shared how he restored the logo of his cymbals. Not quite sure pero sya nga ata yun.

byako21 · « **Reply #534 on:** June 17, 2011, 12:00:53 PM »

i have tried putting a single coat of clear nail polish sa logo, it did not affect the sound at all.. pero take note single coat lang kasi yung ibang nail polish matapang ang content, pag inulitan mo ng coat sumasama na ang paint ng logo. its effective din sa brand ng mga stick... nde talaga sya nwawala kahit madumi na ang handle. hope this help

Riff_6603 · « **Reply #535 on:** June 17, 2011, 06:51:50 PM »

Quote from: mambo on June 16, 2011, 07:45:47 PM

I think a fellow forum member, Vhinming, shared how he restored the logo of his cymbals. Not quite sure pero sya nga ata yun.

@mambo - yup! siya yun bro!

DIY: Cymbal Logo Restoration
http://talk.philmusic.com/board/index.php?topic=198850.0

@music_en_sound - this might help out as well

Cymbal Logo Refreshener/Restoration thread
http://talk.philmusic.com/board/index.php/topic,26652.0.html

music_en_sound · « **Reply #536 on:** June 20, 2011, 02:17:45 AM »

maraming salamat

* tyrande
* mambo
* byako
* Riff

mr. trigger · « **Reply #537 on:** June 20, 2011, 10:54:53 AM »

Quote from: tyrande101 on May 23, 2011, 12:25:32 AM

well I maybe in a wrong thread (you may delete this or transfer to a right thread) but I think it can be one of a general question for me. Is this WipeOut cleaner not bad for cymbals? I mean, hindi ba siya nakaka nipis like other metal polisher? Kasi mejo nagiging routine ko na kasi sya na every time na gagamitin ko ang mga cymbals, afterwards pupunasan ko sila ng towel with wipeout..

pareho tayo ng gamit bro. waterbase ang wipeout kaya sa tingin ko ok naman sya sa cymbals..matagal ko ng gamit yan

incubus_boy08 · « **Reply #538 on:** June 28, 2011, 08:14:21 PM »

ano po bang wax ang pwede gamitin sa mga cymbals natin? Cast bronze po yung akin eh

bulok · « **Reply #539 on:** June 28, 2011, 10:24:59 PM »

^oo nga, turtle wax pwede ba? yung mga wax na pang-polish sa sasakyan?

tyrande101 · « **Reply #540 on:** June 29, 2011, 11:54:14 AM »

tska hindi ba nakakanipis ng cymbal ang pag buff?

jaeidn · « **Reply #541 on:** June 29, 2011, 12:51:03 PM »

hello everyone, i wanna ask some advice. i used sabian cymbal cleaner on my zildjian cymbals. at first it looked good and perfect but after a few hours it turned orange/darker. i did everything the right way that's why i'm wondering why it oxydized so fast even though i wiped off all the cleaner.

DrumWorksIII · « **Reply #542 on:** June 29, 2011, 04:01:46 PM »

Quote from: jaeidn on June 29, 2011, 12:51:03 PM

hello everyone, i wanna ask some advice. i used sabian cymbal cleaner on my zildjian cymbals. at first it looked good and perfect but after a few hours it turned orange/darker. i did everything the right way that's why i'm wondering why it oxydized so fast even though i wiped off all the cleaner.

sabian cleaner works best for only sabian cymbals. kaya if your cymbals are zildjian use zildjian cymbal cleaner. may appropriate cleaner for every cymbals. I think it is design that way

pejadanza · « **Reply #543 on:** June 29, 2011, 04:24:13 PM »

read ka ng thread dito under cymbal care and maintenance. pede kaya yan e buffing machine noh?

zachki · « **Reply #544 on:** June 29, 2011, 05:26:01 PM »

meron pang buff sa church ng mga cymbals after few months naging weird ung sound nila... more metal/steel like ung tunog nila.. imo

jaeidn · « **Reply #545 on:** June 29, 2011, 07:13:33 PM »

Quote from: DrumWorksIII on June 29, 2011, 04:01:46 PM

sabian cleaner works best for only sabian cymbals. kaya if your cymbals are zildjian use zildjian cymbal cleaner. may appropriate cleaner for every cymbals. I think it is design that way

i don't think so.

kasi same lng nmn ng bronze alloy un and sabian is zildjian din nmn.

actually gnyan din naging result ng zildjian cymbal polish sa akin lalo na sa trad finished cymbals kasi nga ang hirap alisin lahat nung cleaner pero in this case madali siya alisin pero un nga same results din.

Quote from: pejadanza on June 29, 2011, 04:24:13 PM

read ka ng thread dito under cymbal care and maintenance. pede kaya yan e buffing machine noh?

buffing machine? wla ako nun.

actually sumakit na nga ung ktwan ko kakapunas and tlgang naalis ko lahat ng cleaner. i didn't use 2 cloth but i used 3 instead.

i'm wondering kung pwde after ko siya malinis the way i did e wrinse ko siya with water prang groove juice kasi kaamoy siya ng groove juice lighter lng ung amoy niya.

gawin ko n lng un next week.

thanks...

pls avoid text speak - mod

DrumWorksIII · « **Reply #546 on:** June 29, 2011, 09:14:24 PM »

Quote from: jaeidn on June 29, 2011, 07:13:33 PM

buffing machine? wla ako nun. actually sumakit na nga ung ktwan ko kakapunas and tlgang naalis ko lahat ng cleaner. i didn't use 2 cloth but i used 3 instead. i'm wondering kung pwde after ko siya malinis the way i did e wrinse ko siya with water prang groove juice kasi kaamoy siya ng groove juice lighter lng ung amoy niya.
gawin ko n lng un next week.
thanks...

bro mas better if you use a zildjian cleaner on your zildjian cymbals

jaeidn · « **Reply #547 on:** June 29, 2011, 09:38:44 PM »

Quote from: DrumWorksIII on June 29, 2011, 09:14:24 PM

bro mas better if you use a zildjian cleaner on your zildjian cymbals

ang hirap kasi gamitin nung zildjian polish kaya ayw ko nun eh.

majority kasi ng cymbals ko traditional finish kaya ang hirap linisin using the zild polish.
i'll try to wrinse it n lng with water after applying and after mapunasan to see kung gagana nga.

salamat po....

pls avoid text speak - mod

plep · « **Reply #548 on:** June 30, 2011, 10:18:21 PM »

1. pareho lang ang bakal na gamit sa zildjian at sabian, kaya walang kaso kung anong cleaner gamitin mo. paiste lang ang brand na kailangang cleaner talaga nila ang gamit. maliban kasi sa iba ang alloy nila, may coating pa cymbals nila.

2. teka... di ba para sa appearance lang rin naman kaya nililinis ang cymbals? kaso sacrifice the color kasi magiging kulay orange? eh di bakit pa lilinisin kung papanget din pala ang itsura?

tyrande101 · « **Reply #549 on:** July 02, 2011, 12:41:01 AM »

Quote from: zachki on June 29, 2011, 05:26:01 PM

meron pang buff sa church ng mga cymbals after few months naging weird ung sound nila... more metal/steel like ung tunog nila.. imo

so talaga nga sigurong nakaka nipis ang pag buff?

News:

Author Topic: Cymbal Care and Maintenance thread (Read 151307 times)

jaeidn

jaeidn

jaeidn