Electronic/Digital Drum Equipment Thread

[Xelly]

sooo... alto or Samson huhuhuhuhuhu miss you paps sep HAHAHAHA

Samson kung tibay pag-uusapan! Miss you too bro! Hehehe

[Ralph_Petrucci]

Samson kung tibay pag-uusapan! Miss you too bro! Hehehe

ayusssss! salamat paps!

[ken minneman]

Naka experience na rin dati ako ng ganyang issue sa ekit ko so tnry ko rin ung gaya sayo pero my indication sa module nya na gumagana ung trigger kc ung LED makikita mong umiilaw kapag nkapick up ng signal from trigger kaya tiningnan ko muna sa mga settings sa module kung my nabago pro d ko mahanap kaya factory reset nlng ung last resort ko tas tumunog na ulit ung input from trigger. Hirap kc pg ganyang cable pag nasira mahirap ayusin or bibili ka ng bago.

Factory reset di ko pa natry. hmm.. Sige nga sir. sana makatulong

[cdapineda]

Owner of a Roland TD-9k here. Mga 8+ years na sakin yung e-drums ko, currently unusable na sya since nginuya ng aso yung cable ng bass pedal at matigas na din yung rubber sa loob nung hihat pedal. Any ideas san nakakabili ng pamalit na parts?

Sent from my SM-N910C using Tapatalk

[Vdrums Freak]

Owner of a Roland TD-9k here. Mga 8+ years na sakin yung e-drums ko, currently unusable na sya since nginuya ng aso yung cable ng bass pedal at matigas na din yung rubber sa loob nung hihat pedal. Any ideas san nakakabili ng pamalit na parts?

Sent from my SM-N910C using Tapatalk

Try mo inquire sa yupangco..pro sa pagkakaalam ko phased out na kc ung td9 kaya d lng ako sure kung meron pa bang available na parts na pwd bilhin..kung wla sa ebay meron din..
http://www.ebay.ph/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=roland+fd8&_sacat=0

pero ung bass pedal baka pwd mo pa idugtong yan kung d nmn naputol lahat nang cable..mono connection lng nmn yan kaya madali lng dugtungan o ayusin

[cdapineda]

Try mo inquire sa yupangco..pro sa pagkakaalam ko phased out na kc ung td9 kaya d lng ako sure kung meron pa bang available na parts na pwd bilhin..kung wla sa ebay meron din..
http://www.ebay.ph/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=roland+fd8&_sacat=0

pero ung bass pedal baka pwd mo pa idugtong yan kung d nmn naputol lahat nang cable..mono connection lng nmn yan kaya madali lng dugtungan o ayusin

I'll try researching pano magreplace ng mono jacks. Ang natry ko lang is magreplace ng jack ng earphones, dunno if same mechanics lng din. Yung hat pedals naman ay same parin sa newer models sa same production line, problem ko lang is how much at saan. Would try yupangco tho. Thanks!

Sent from my SM-N910C using Tapatalk

[dictatone]

Sent from my SM-G900F using Tapatalk

[Vdrums Freak]

Ask ko lng po d po ba nasisira ung head ng kick pad nyo against sa felt head beater ng pedal?

[lovecore]

Mga bro, available ba locally ang rubber actuator replacement for Roland FD8 hat pedal? Mine broke off kasi. Wanted to do the remedy pero when I opened it, it was broken na so I have to replace it instead 

[Vdrums Freak]

order mo sa yupangco bro wla ksing parts na available locally na binebenta dto..medyo matagal nga lng bago dumating..

try mo lng dto mag order pero international nga lng..baka japan ung magsupply..
http://shop.rolandus.com/p/actuator?pp=24

[lovecore]

order mo sa yupangco bro wla ksing parts na available locally na binebenta dto..medyo matagal nga lng bago dumating..

try mo lng dto mag order pero international nga lng..baka japan ung magsupply..
http://shop.rolandus.com/p/actuator?pp=24

I was afraid someone might say that hehe wala pala talaga.

Salamat bro!

[peeves24]

Mga bro, available ba locally ang rubber actuator replacement for Roland FD8 hat pedal? Mine broke off kasi. Wanted to do the remedy pero when I opened it, it was broken na so I have to replace it instead 

hmmm bili ka na lang bagong fd8

if you replace the rubber actuator, you also need a type of silicon grease (which i havent been able to identify) that needs to be applied on the rubber for it to work properly. no grease = useless pedal

[drumdrum2]

Magandang araw mga brader.

I just recently bought a used Roland TD 15KV at namomroblema ako sa hot spot.

Baka may suggestions kayo.

[Vdrums Freak]

Magandang araw mga brader.

I just recently bought a used Roland TD 15KV at namomroblema ako sa hot spot.

Baka may suggestions kayo.

  Pareho tayo ng kit bro. solid na solid yan. I think pag dating sa hot spot yung magagawa mo lng jan ay baguhin yung curve ng velocity..Nasa page 42 yata ng manual yan. at saka iwasan mo tamaan ang dead center ng pads lalo na sa TD15KV lahat yan nsa gitana ung piezo. Pero pag gumagamit ka ng VSTi mas significant dto ung hot spot, pwd mo ring bawasan ung velocity layer sa settings ng program pra maiwasan mo maabot ung peak ng velocity na mag cause ng drastic change ng sound. Same thing iwasan mo lng tlga ung dead center.

[aaron101]

Mga boss, pardon my ignorance bago lang kasi ako sa edrums. Is there any other way of playing a song as background and drum sound on one output like headphones na walang gamit na mixer? May ma susugest po na kayong mixer na may usb port?

Another problem is, gumagamit ako ng EZdrummer. So yung out nya ay yung sa PC. Pano ko ma mi-mix sa mixer yung music na galing sa phone ko at yung sound ng edrums (via EZdrummer) sa PC. Di ko kasi mapagsabay ang sound kasi Asio4all ang gamit na sound card driver at one at a time lang. Di pwede mag youtube at EZdrummer at the same time.

[sonicassault]

Mga boss, pardon my ignorance bago lang kasi ako sa edrums. Is there any other way of playing a song as background and drum sound on one output like headphones na walang gamit na mixer? May ma susugest po na kayong mixer na may usb port?

Another problem is, gumagamit ako ng EZdrummer. So yung out nya ay yung sa PC. Pano ko ma mi-mix sa mixer yung music na galing sa phone ko at yung sound ng edrums (via EZdrummer) sa PC. Di ko kasi mapagsabay ang sound kasi Asio4all ang gamit na sound card driver at one at a time lang. Di pwede mag youtube at EZdrummer at the same time.

Since naka EZ drummer ka, gamitin mo syang plugin sa DAW tulad ng Reaper. Yung isang track dun mo I load yung EZ drummer, arm and monitor, tapos add ka ng isang track at dun mo ilagay yung MP3 na gusto mo. Tapos laruin mo na lang yung levels to your taste.

[aaron101]

Since naka EZ drummer ka, gamitin mo syang plugin sa DAW tulad ng Reaper. Yung isang track dun mo I load yung EZ drummer, arm and monitor, tapos add ka ng isang track at dun mo ilagay yung MP3 na gusto mo. Tapos laruin mo na lang yung levels to your taste.

Maraming salamat. May magandang solution nman pala. Try ko yung advice mo.

[drumdrum2]

Pareho tayo ng kit bro. solid na solid yan. I think pag dating sa hot spot yung magagawa mo lng jan ay baguhin yung curve ng velocity..Nasa page 42 yata ng manual yan. at saka iwasan mo tamaan ang dead center ng pads lalo na sa TD15KV lahat yan nsa gitana ung piezo. Pero pag gumagamit ka ng VSTi mas significant dto ung hot spot, pwd mo ring bawasan ung velocity layer sa settings ng program pra maiwasan mo maabot ung peak ng velocity na mag cause ng drastic change ng sound. Same thing iwasan mo lng tlga ung dead center.

Salamat sa tip sir. Tama ka. Solid na solid sya talaga. Gusto ko yung feel nya. Yung hotspot lang talaga biggest downside. Sa compressor ko na lang nilaro para at least walang drastic na increase ng volume.

Sent from my SM-G350E using Tapatalk

[soundvent_ph]

planning to buy a starter e drums. ringway td92 or second hand alesis dm 6? kamusta pala feel ng alesis DM6? medyo close to real ba? Thank you for your input!

[Ralph_Petrucci]

planning to buy a starter e drums. ringway td92 or second hand alesis dm 6? kamusta pala feel ng alesis DM6? medyo close to real ba? Thank you for your input!

the ringway is a waste. might as well go with the DM6. well, the tom and snare pads will be quite there, but the cymbals will be far off.

[soundvent_ph]

Thank you sir! btw, my e drums has limited number of pads (just the standard e kit) im used to having the 2 tom setup, can I assign my tom 2 to trigger the ride cymbal on my plugin software (i use ezdrummer and addictive drums 2). I want to use the original ride pad to be a china or a second crash sana. sa module ko they are assigned na e (ex. tom pad to a tom slot, ride pad to a ride slot.

not really used in having a 3 tom setup, is this possible? hope my inquiry made sense.

[Ralph_Petrucci]

Thank you sir! btw, my e drums has limited number of pads (just the standard e kit) im used to having the 2 tom setup, can I assign my tom 2 to trigger the ride cymbal on my plugin software (i use ezdrummer and addictive drums 2). I want to use the original ride pad to be a china or a second crash sana. sa module ko they are assigned na e (ex. tom pad to a tom slot, ride pad to a ride slot.

not really used in having a 3 tom setup, is this possible? hope my inquiry made sense.

yes pwede. I do this as well. for ez drummer, you will have to change the midi note that your module is sending to the computer. I use Superior Drummer kasi, may learn button siya na when you click that button for the sound you want to hear, you just hit the pad where you want it assigned. mas madali mag custom kumbaga. may midi mapping ang EZ drummer where a specific sound corresponds to a midi note or number. hanapin mo lang yung gusto mong maging tunog tapos imap mo dun sa module mo.

[soundvent_ph]

yes pwede. I do this as well. for ez drummer, you will have to change the midi note that your module is sending to the computer. I use Superior Drummer kasi, may learn button siya na when you click that button for the sound you want to hear, you just hit the pad where you want it assigned. mas madali mag custom kumbaga. may midi mapping ang EZ drummer where a specific sound corresponds to a midi note or number. hanapin mo lang yung gusto mong maging tunog tapos imap mo dun sa module mo.

I use ezdrummer 2 sir, saan kaya dun ang learn/map tool/option? sorry 2 days palang ako nagsstart mag e drums. haha.

[Ralph_Petrucci]

I use ezdrummer 2 sir, saan kaya dun ang learn/map tool/option? sorry 2 days palang ako nagsstart mag e drums. haha.

google paps. andun lahat ng detailed steps pano imap yung EZDRUMMER mo.

[jake z]

Sana maabutan ko yung dm6. Anways, do you think ill have a hard time with using an iron cobra for the dm6? Nabasa ko kasi sa review medjo maliit lang yung pad sa kick.