anyone got schematics for a footswitch which would work on the GT10? ala FS 5 sana. Wala mabili dito e.
To everyone and Markd , get a stereo cable (TRS), plug it to the Ctrl3/Ctrl4 socket.
Press System button and goto CONTROL icon, on it goto Tab Crtl 3 setting and set preference to System and function to FX1. Just the same goto Tab Crtl4 do the same and the function this time is FX2.
Now grab the other end of the stereo cable and get a short electrical wire stick it to the SLEEVE permanently then on the other end of the wire momently touch and let go the wire unto the RING (middle) and you'll see the FX2 will be ON. Repeating it will be OFF. Same with SLEEVE and the TIP for FX1.
PRESTO!!! you have a FOOTSWITCH in the making. Just use a SPST momentary type pedal footswitch not the latching type, one for each and look for a sturdy pedal box.
If your not using it for FX1 and FX2 globally remove the setting on the CONTROL icon and put it back to its default. You can independently make an ASSIGN in a patch and set TARGET such as TUNER
Assign1
Target TUNER
tuner sw
Min OFF
Max ON
Source Ctrl3
Scr mode Toggle
Actrnglo 0
Actrnghi 127
and many more!!!
Enjoy our GT10,