DIY boutique amps, pedals, mod kits, proto-type circuits, etc - Post them here!

[fretzburner]

Nasa picture hindi connected yung reverb tank, volume 1 and 2 ganyan talaga hindi gagana pag isa lang e open.Dapat open volume 1 and 2.Walang schematic kaya not sure bakit ganyan

[bakit?]

HELP!

Yung Amp ko Clone  "yata"  ng Mesa Mark 1 1970s to 80s. (na syempre based din sa  Fender Princeton 12-watt amplifier+Bassman12-inch speaker)

Jugg Box Stuff o60g

80Watts  -110v









ngayun eto yung problem nya:

a) di na tumutugog reverb (possible di naka connect yung reverb tank?)

b) Volume 1 -Low / Volume 2  -High// Master     - Di tutunog yung volume 1 input kung di ko "on" yung volume 2.
    same din sa input 2

c) may mga times na parang nag hum sya na ascending - na lumulubog na yung guitar sound - tpos parang buzzing na low tone na parang painit ng painit
(tinututukan ko electric fan yung tubes)

d) gamit ko sa kanya transformer 100watts 9ok lang ba to kahit 80watts amp ko?)

 
TIA!

maganda yang amp mo chazz. paayos mo na kay mang raul. haha

[j2sip]

Hello,
May nakasubok na po sa inyo nagorder sa tayda or futurelec? Ok kaya yung direct to the Philippines na Registered Mail?

[cacophony]

Hello,
May nakasubok na po sa inyo nagorder sa tayda or futurelec? Ok kaya yung direct to the Philippines na Registered Mail?

Got my package from Tayda last week thru post office. No need for additional payment since registered mail. Arrival of items in MNL took roughly a week. Pero tatagal sa customs, aabot roughly a month prior to arrival. So if ordering from Tayda, give it at least one and a half months lead time.


Here is my tracking info FYR:

[jmwreck]

@cacophony, di ba dhl yung gamit papunta pinas?

D6503

[cacophony]

@cacophony, di ba dhl yung gamit papunta pinas?

D6503

DHL is an option.. Opted for a cheaper registered mail instead..

[kabuki]

mga Boss!! kelangan ko po ng tulong nyu.. hindi ko po alam kung anu sira ng small clone ko, ang issue po kasi eh kapag naka bypass
wala po lumalabas na signal papunta sa amp, pero kapag naka "ON" sya, okay naman.,. bale parang naka mute ung signal ko kapag naka bypass sya. iniisip ko po baka nag rerepair kayo or may kakilala kayo na nagrerepair ng ganto, baka po ung switch lang ung problema.. salamat po.

[cacophony]

Those Alpha pots from Tayda are effin A!

[dnielle00]

Good Day!

Tanong lang po mga ka-philmusic, yung Zoom g3x ko po kasi may button/switch na medyo defective (pang-engage ng effect on/off silver colored switch), di siya kasing responsive unlike dun sa dalawang switch nakakailang pindot ako minsan para lang mag on/off sya.

Meron po bang DIY solution para maging responsive yung switch or should i bring this to a repair man?(please provide contact number if meron thanks!)

[Zacchary_amadeus]

Baka may pwedeng tumulong sa akin diyan na pedal builder???
Pwede po ba ako mag pagawa ng mad professor delay clone??? 09162538069

[cacophony]

Baka may pwedeng tumulong sa akin diyan na pedal builder???
Pwede po ba ako mag pagawa ng mad professor delay clone??? 09162538069

heads up to the builder:

[Zacchary_amadeus]

heads up to the builder:

Sir cacophony gumagawa ka ba?? Kaya mo po ba gumawa?? Pagawa po ako.. Thanks thanks

[cacophony]

Sir cacophony gumagawa ka ba?? Kaya mo po ba gumawa?? Pagawa po ako.. Thanks thanks

Kaya ko gawin pero di ko gusto. I only make pedals for personal use.

[cacophony]

latest creation Boss CE2 clone

[siotiboy]

Good day! I'm new to this thread, and I'm glad to know that a thread like this exists. I'd just like to share my build as well. I made a separate thread for it. The link follows.

http://talk.philmusic.com/index.php?topic=332285.0

I've been building my own pedals as well, for around 5 yrs or so and I hope i could post them here too. I've used GGG, Tonepad, and Madbean circuits, and at the moment I have on may board the Sunking(Klon Clone), Neutrio(Eternity Clone), Slambox(Boost) from Madbean and a Crunchbox layout i forgot where I found in the internet.

But the thread above is, by far, the most fulfilling build yet, since the layout AND PROGRAMMing is done by myself. Sure, I got some ideas from the web, but all in all im confident I've done pretty much of the work. Just want to share my joy,

THanks, and CHEERS! Mabuhay ang mga DIYers

[gambit07]

Glad this thread is still alive and kicking!

Ang gaganda parin ng mga build niyo mga ser, as always!

Latest build.. mad professor deep blue delay. Built 2 of these, one for me.. hehe..



Sent from my ASUS_Z00AD using Tapatalk

[Ralph_Petrucci]

Glad this thread is still alive and kicking!

Ang gaganda parin ng mga build niyo mga ser, as always!

Latest build.. mad professor deep blue delay. Built 2 of these, one for me.. hehe..



Sent from my ASUS_Z00AD using Tapatalk

very nice bro!

linis ng wiring at plotting ng components!

[gambit07]

latest creation Boss CE2 clone

Very nice build! (project kit from madbean? i see "pork barrel" printed on the circuit board) AND, ang ganda ng pcbs! kayo po ba gumawa ng pcb niyo sir? gusto ko nung footswitch pcb niyo.. may solder mask.. ang pangit kasi tingnan ng self-etched pcbs ko.. nagooxidize yung copper pads.. baka may for sale kayo jan na extra sir.. hehe.. kahit 2 lang or 3..or 5.. haha. Saan po kayo nagsosourcing ng parts niyo sir?

[gambit07]

very nice bro!

linis ng wiring at plotting ng components!

maraming salamat bossing!

[chernandez1]

Glad this thread is still alive and kicking!

Ang gaganda parin ng mga build niyo mga ser, as always!

Latest build.. mad professor deep blue delay. Built 2 of these, one for me.. hehe..



Sent from my ASUS_Z00AD using Tapatalk

Awesome! san kayo nakakakuha nung nuts para sa input jacks nyo. wala akong makita. I've always wanted na ganyan yung input jack, kaso wala akong makitang nut, so I've settled dun sa usual.

Thanks!

[cacophony]

Very nice build! (project kit from madbean? i see "pork barrel" printed on the circuit board) AND, ang ganda ng pcbs! kayo po ba gumawa ng pcb niyo sir? gusto ko nung footswitch pcb niyo.. may solder mask.. ang pangit kasi tingnan ng self-etched pcbs ko.. nagooxidize yung copper pads.. baka may for sale kayo jan na extra sir.. hehe.. kahit 2 lang or 3..or 5.. haha. Saan po kayo nagsosourcing ng parts niyo sir?

effect boards from madbean, 3PDT board from mammothelectronics.. no sale for now... maybe next year..

[changedmynametojimi]

meron na ba nag attempt gumawa ng pharaoh fuzz? my friend made one - wala sya time magawan ako hahaha.. baka may nagoffer?

[gambit07]

Awesome! san kayo nakakakuha nung nuts para sa input jacks nyo. wala akong makita. I've always wanted na ganyan yung input jack, kaso wala akong makitang nut, so I've settled dun sa usual.

Thanks!

It's a totally different type of jack/socket.. hindi nabibili yung nuts nyan para maadapt sa other input/output jacks kasi ang threads ng nut nyan ang paloob na kinakabit sa jack mismo. Unlike with the regular ones na nakalabas yung threads ng jack and then the nut secures it outside. Pinaship ko pa yan from china along with my enclosures and knobs and all.. I don't know if meron ang epektos. Ilan ba kelangan mo?

[chernandez1]

It's a totally different type of jack/socket.. hindi nabibili yung nuts nyan para maadapt sa other input/output jacks kasi ang threads ng nut nyan ang paloob na kinakabit sa jack mismo. Unlike with the regular ones na nakalabas yung threads ng jack and then the nut secures it outside. Pinaship ko pa yan from china along with my enclosures and knobs and all.. I don't know if meron ang epektos. Ilan ba kelangan mo?

Figure out this was the case. haha! 2 nalang sana, since nawire ko na yung iba. And i'm guessing Vero yung board mo? (horizontal connections) hindi perf? Wala ako makitang ganyan dito.

And guys, hanep ang linis ng wiring. Idol! ) ang dumi nung akin. well, 2months pa lang naman ako sa stuff na to. pero ang saya pag gumagana yung pedal. wooh. haha!

[ubersam]

It's a totally different type of jack/socket...

Looks like Neutrik/Rean NMJ#HC: http://www.neutrik.com/en/audio/plugs-and-jacks/m-series/nmj4hc-s