mga bossing baka pwede makahingi ng tips kung pano mapapagana yung Sound Hold effect using CTL or the EXP Pedal... di ko sya mapagana..gumagana lang sya kapag mano-mano ko pinipihit yung knob para ma-on yung Sound Hold..
kahit i-assign ko sya sa CTL, kahit on naman yung knob dun sa screen, pag-activate ko using CTL di naman gumagana...
You need 2 assign.
Initialized a patch.
First make the FX1 Sound Hold leave it dont press the button yet leave it off and deactivate NOTE the default is T-Wah effect go find the Sound Hold effect
Here's the assign to active the FX1 using ctrl2
Press Mst/PdlFx button then goto/select Assign Icon
Under Assign press the display button into List view
At Assign tab1 make this assign
Target FX1
on/off
Min Off
Max On
Source Ctrl2 pedal
Scr mode Toggle
Actrnglo 0
Actrnghi 127
Press the Mst/PdlFx button to active the tab1, you'll see the number 1 gets highlighted on lower leftmost of the screen
Here's how to switch the Sound Hold parameter ON
Goto Assign tab2 and make this assign
Target FX1:SH <- SH stand for Sound Hold effects
Hold
Min off
Max On <- meaning when you press the crtl2 it will switch ON
Source Ctrl2 pedal
Scr mode Toggle
Actrnglo 0
Actrnghi 127
Press the Mst/PdlFx to active number 2
Press the WRITE button to save the patch don't forget this.
Now check if you press ctrl2 to
This is the Controller FUNCTION naman just to let you know the difference
Initialized a patch
Press Mst/PdlFx goto select PdlFx Icon
Press the Display mode into List View, you'll see the default CRTL2 is Delay effect
Change Ctrl2 Function into FX1 so the ctrl2 would switchON the FX1 not the delay effect
Now make the Assign tab2 like the above and no need to make the assign tab1 and do the above procedure. Dont forget to Press Mst/PdlFx to active the Assign tab2 and lastly press WRITE button to SAVE the patch.
That's the difference between ASSIGN CTRL with FUNCTION CONTROLLER.
Enjoy our GT10