Author Topic: mga DIY speaker cabinet users/builders post your pic here (Read 403181 times)

konastinky · « **Reply #250 on:** March 15, 2011, 01:38:55 PM »

sir ohms lapit na matapos mga kapatid nang wsx ko...cheers up for sir jojo

cool guy...God bless sir jojo..the more you share the more blessings to come...

ohms05 · « **Reply #251 on:** March 15, 2011, 08:23:22 PM »

yes sir konastinky bukas iuuwi ko na.

andun pa yata yung sa iyo naka safe keep. thumbs up talaga ako kay jojo.napakabait kausap.
@sir jojo post naman nung finished product.

konastinky · « **Reply #252 on:** March 15, 2011, 08:59:02 PM »

oo nga sir ohms.. baka kce isabay nadin iuuwi yung pinsan nyang mt122..

God bless sir,

ermita · « **Reply #253 on:** March 16, 2011, 05:20:33 AM »

Quote from: konastinky on March 15, 2011, 08:59:02 PM

oo nga sir ohms.. baka kce isabay nadin iuuwi yung pinsan nyang mt122.. God bless sir,

Hi konastintky, are you going to run some kick bin above WSX. Pag hindi what crossover point setting you setting it up to meet your mt112. Siguro hindi ka na makahintay umuwi para ma i-try ang bagong laruan

.......galing talaga ni Jojo...By the way Jo, I'ved just notice that theres no handle sa mga side ng WSX only at the bottom and back Ok lang ba siya e-move?

Same with Mackie theres no handle with your 186 at all have you experience any real problem stocking/moving them...by the way those finish on your 186 are great but I think the one you did on Cyclops where even better

constantpressure · « **Reply #254 on:** March 16, 2011, 08:00:37 AM »

Quote from: ermita on March 16, 2011, 05:20:33 AM

Hi konastintky, are you going to run some kick bin above WSX. Pag hindi what crossover point setting you setting it up to meet your mt112. Siguro hindi ka na makahintay umuwi para ma i-try ang bagong laruan .......galing talaga ni Jojo...By the way Jo, I'ved just notice that theres no handle sa mga side ng WSX only at the bottom and back Ok lang ba siya e-move?

Same with Mackie theres no handle with your 186 at all have you experience any real problem stocking/moving them...by the way those finish on your 186 are great but I think the one you did on Cyclops where even better

Sir Ermita...we adopted the 2 man handling technique which was used in the Labsub woofer project in the PSW forum...madaling buhatin.

Magandang araw,
jojo

ohms05 · « **Reply #255 on:** March 16, 2011, 10:46:48 AM »

+1 ganyan din technique namin magbuhat mas gumagaan ang buhay.

constantpressure · « **Reply #256 on:** March 16, 2011, 06:18:06 PM »

Here you go Sir Ohms05...

The Crown JH186...pasenya na madumi...more than 2 years na siya so far...

Maganadang araw,
jojo

ermita · « **Reply #257 on:** March 16, 2011, 08:23:42 PM »

.....Jo, nice illustration, by the way what is the weight of WSX loaded kasi marine lang sya. I can imagine the weight of this if using Birch......Yung driver parang bago pa rin....Jo naka coated/pintura ba ang cone? O baka na sa flash lang ng camera..

Jo ok din siguro sa bottom rear corner ng box yung naka angle na wood kung hindi deretso yung cut ng bottom and rear panel pwede siguro dalawang gulong doon para kahit isang tao pwede na mahila...

konastinky · « **Reply #258 on:** March 16, 2011, 10:23:56 PM »

sir ohms gawa na mga magkakapatid nang wsx!!!!

ohms05 · « **Reply #259 on:** March 17, 2011, 01:02:10 AM »

wow hehe. sir konastinky uwi ka na para mapatunog natin ng sabay sabay.
sir jojo sa friday dadaan muna ako ng raon to buy the jack hammer.

konastinky · « **Reply #260 on:** March 17, 2011, 04:49:17 AM »

heheheheh wish ko lang na makauwi agad.. sir anong pang ibabaw mo? andano po gamit mong mixer?

constantpressure · « **Reply #261 on:** March 17, 2011, 10:52:14 AM »

Quote from: ermita on March 16, 2011, 08:23:42 PM

.....Jo, nice illustration, by the way what is the weight of WSX loaded kasi marine lang sya. I can imagine the weight of this if using Birch......Yung driver parang bago pa rin....Jo naka coated/pintura ba ang cone? O baka na sa flash lang ng camera..

Jo ok din siguro sa bottom rear corner ng box yung naka angle na wood kung hindi deretso yung cut ng bottom and rear panel pwede siguro dalawang gulong doon para kahit isang tao pwede na mahila...

Sir Ermita hindi ko alam kung accurate...pero mga +/- 50Kg without driver.
original na cone po yun hindi coated...pero talagang makintab na siya.
Siguro Sir baka 2.5" na caster puede kasi hindi gaanao malalim ang wedge at hindi rin 45º ang angle.

Magandang araw,
jojo

ohms05 · « **Reply #262 on:** March 17, 2011, 12:27:21 PM »

Quote from: konastinky on March 17, 2011, 04:49:17 AM

heheheheh wish ko lang na makauwi agad.. sir anong pang ibabaw mo? andano po gamit mong mixer?

sir tasso 315 pero plan ko magpagawa ng mtl kay jojo papakopya ko sana yung mb mas type nya mtl. loaded with jackhammer din. para straight phonic.

triciaaruba · « **Reply #263 on:** March 17, 2011, 06:27:24 PM »

ohms05 · « **Reply #264 on:** March 18, 2011, 07:32:13 PM »

sige sir tanung ko kay jojo kung ano balak nya ilagay na speaker. if ever salamat bro sa discount mo.

konastinky · « **Reply #265 on:** March 19, 2011, 04:11:01 AM »

sir ohms naiiuwi mo na si wsx mo? musta performance sir?

ohms05 · « **Reply #266 on:** March 19, 2011, 04:22:21 AM »

Quote from: konastinky on March 19, 2011, 04:11:01 AM

sir ohms naiiuwi mo na si wsx mo? musta performance sir?

Sir konastinky di ako natuloy pumunta nagkaroon ako lagnat hangang ngayun sana by monday oks na.
Good luck sa mt122 mo project starts tomorrow na b?

ohms05 · « **Reply #267 on:** March 19, 2011, 11:48:37 AM »

Quote from: ohms05 on March 19, 2011, 11:40:49 AM

calling mr konastinky bka gusto mo copy ng original tasso st315 na gagawin ni sir jojo.

konastinky · « **Reply #268 on:** March 19, 2011, 03:14:22 PM »

uyyy... ganda nyan sir ah!!!papagawan mo pala nang mga kapatid yan ?. antabayan ko yan.. sir para syang electro na maki ang horn ....ganda yan sir at pwede pa syang isabit..and yung mt by next week pa sir sa swldo hahaha ... sir nga pala pukol mo namn yung price nang kuha mo sa spkr mo para may idea ako pag uwi ko kung saan mura and makabili.. salmat sir and good luck sa bisyo natin...God bless

ohms05 · « **Reply #269 on:** March 19, 2011, 05:21:58 PM »

Quote from: konastinky on March 19, 2011, 03:14:22 PM

uyyy... ganda nyan sir ah!!!papagawan mo pala nang mga kapatid yan ?. antabayan ko yan.. sir para syang electro na maki ang horn ....ganda yan sir at pwede pa syang isabit..and yung mt by next week pa sir sa swldo hahaha ... sir nga pala pukol mo namn yung price nang kuha mo sa spkr mo para may idea ako pag uwi ko kung saan mura and makabili.. salmat sir and good luck sa bisyo natin...God bless

oo ba sir sge pag bibili ka ng gamit sabihin mo sa akin hihingi tyo ng malaking discount.alam mo lang pangit dyan sa tasso yung 10 inch na driver nya ang mahal ka presyo halos ng branded speaker. balak ko palitan ng p.audio laman compare ko kung ok tunog.

konastinky · « **Reply #270 on:** March 19, 2011, 06:13:57 PM »

no prob sir.. kailan umpisahan sir yang kapatid ni tasso?

ohms05 · « **Reply #271 on:** March 19, 2011, 06:26:04 PM »

sir konastinky asap kailangan ko kasi bago mag april 5. pero pag komplikado kay sir jojo mt122 na papagawa ko;.merun pa ksi fiberglass basket para sa 10'' driver tapos metal bracket for the horn.

konastinky · « **Reply #272 on:** March 19, 2011, 08:26:08 PM »

ah ganun ba sige sir no prob unahin na ni sir jojo yan heheheeh.. pag nag katannon parehas tayong naka mt heheheehe..God bless

triciaaruba · « **Reply #273 on:** March 20, 2011, 03:32:13 PM »

anu ba may mlkasyang tasso or ung mtl122?

ohms05 · « **Reply #274 on:** March 20, 2011, 04:19:48 PM »

Sge sir tingnan nation Kung alin mas malinaw unchain ko na pagawa mt122

News:

Author Topic: mga DIY speaker cabinet users/builders post your pic here (Read 403181 times)