TANONG LANG PO! re: mixer - fx send

[niggah]

may mixer ako.... my FX SEND pero.. walang return?

paano un??? san ko i plug ung pabalik n signal galing effeects??
hmmmmmmmm

medyp baguhan p s pg gamit ng mixer eh.....


THANKS IN ADVANCE!!!!!!! sana matulungan ako... medyo hindi napaliwanag sa manual nya e medyo magulo.......
( ung manual ay isa lang para s lahat ng model nila nung mixer )


ung mixer po e  behringer ub1002

[KitC]

Walang return ang model na yan. U have no choice but to use an open stereo channel.

[niggah]

thanks po!!!!!!


so dun ko i plug ung ung return signal... galing effects...    sa LINE IN?? 3/4

[bugoy]

magkano yan pre ?

[abyssinianson]

in cases where you have no FX return, use a stereo channel as a return to mix the effect with your recorded signal. the only drawback to this is you may not be able to mix your signal in a dry/ wet effect setting.

[KitC]

thanks po!!!!!!

so dun ko i plug ung ung return signal... galing effects...    sa LINE IN?? 3/4

Pede sa 3/4 or any free stereo channel, usually I like to use the last free channel para 'di ako malito sa location ng fader. Kahit mono input ng fx, ang output is usually stereo depending on the fx algorithm. Un lang, like abyss says, la kang control sa wet/dry mix. It will have to be done in the fx itself.

[niggah]

MARAMING SALAMAT!!!!!!!!!!!!!!!!!!!   hehehe ngyon medyo na eenjoy ko na... hikhikhik


salamat tlga... pg may tanong ulet ako!! wag kyo mgsasawa ha!!! hehehehehe

[plugzzzz]

ang alam ko kailangan mo ng Y- cable jan



gawa ka nalang kasi mahirap mag hanap all you in naman is isang stereo jack and 2 monos

[KitC]

Dude,

Ung Y-cable o stereo splitter ay para sa mga console na may INSERT jack. The UB 1002 has no inserts anywhere and the aux send is unbalanced mono. If you used the Y-cable on the send, only the left channel input of the fx will have signal.

[plugzzzz]

may mixer ako.... my FX SEND pero.. walang return?

paano un??? san ko i plug ung pabalik n signal galing effeects??
hmmmmmmmm

medyp baguhan p s pg gamit ng mixer eh.....


THANKS IN ADVANCE!!!!!!! sana matulungan ako... medyo hindi napaliwanag sa manual nya e medyo magulo.......
( ung manual ay isa lang para s lahat ng model nila nung mixer )


ung mixer po e  behringer ub1002

KitC eto yung tanung nya o i think y cable will work on that beside i used to have the same behringer mixer  and i tried using yung fx send nya with Y-cable works well with me

[KitC]

KitC eto yung tanung nya o i think y cable will work on that beside i used to have the same behringer mixer  and i tried using yung fx send nya with Y-cable works well with me

Have you ever tried a mixer with inserts? For example, Mackie's 1202 has channel inserts on the first 4 channels (the ones with XLR inputs). Aside from that, it also has a couple of aux sends and stereo aux returns. FYI lang...

The UB1002 has an aux send as stated in pages 6, 7 and 9 of the manual, which also clearly states that ONLY the UB802 has a stereo aux return - I know fully well kung ano yung original na tanong nya and this answers that.

Although the manual mentions aux sends, it only mentions in page 9, Specifications, that the aux send is, and I quote, "1/4" TS connector, unbalanced". Your Y-cable insert uses 1/4" TRS on the insert side with 1/4" TS connectors which are usually connected to an fx input and output - a typical insert cable configuration. The "Ring" (Return) on your Y-cable will have no effect on the aux send since the send is PURELY a send and ONLY the TIP and SLEEVE of the Y-cable will be in contact with the aux sends' connectors. The return of the Y-cable will be UTTERLY USELESS for this mixer. The Y-cable has it's uses, though... but it doesn't answer niggah's particular question.

A little knowledge is a dangerous thing...  

[plugzzzz]

ok