Author Topic: ZOOM USERS THREAD: Share your experiences, patches, etc. here! (Read 1151025 times)

Red_Strat · « **Reply #900 on:** July 14, 2008, 10:16:03 AM »

Ano yung 35 14 10, and yung 25 15 15?

ghostalker · « **Reply #901 on:** July 14, 2008, 10:32:48 AM »

Quote from: Red_Strat on July 14, 2008, 10:16:03 AM

Ano yung 35 14 10, and yung 25 15 15?

ah yun ba, sample settings yan.

kc once na nsa delay ka, meron dun time, repeats, and feedback (yata yung last)

pii_bulacan · « **Reply #902 on:** July 14, 2008, 04:51:14 PM »

Sir's, ano po ang pagkakaiba ng Zoom G2 sa G2.1u???

salamat...

iron_fist · « **Reply #903 on:** July 14, 2008, 05:03:23 PM »

expression pedal and computer connectivity meron sa g2.1u, wala sa g2.

Red_Strat · « **Reply #904 on:** July 14, 2008, 06:43:24 PM »

Quote from: ghostalker on July 14, 2008, 10:32:48 AM

ah yun ba, sample settings yan.

kc once na nsa delay ka, meron dun time, repeats, and feedback (yata yung last)

Oh okay. Thanks!

If the Zoom boys don't mind me asking.. may nakagamit na ba dito ng Digitech RP150? I'm also considering that (alongside the G2). Maybe you guys could tell me which is better in terms of modulations/delay/acoustic sims.

doremi · « **Reply #905 on:** July 14, 2008, 06:53:47 PM »

guys help! :-s nag papanic n ko, nappraning n ko! hahahaha

i have a problem with my zoom g1x. ....nangyare lang toh kanina... at yung efx wala pang 1 year. mga 7 months p lang.... ummmmmmmm, eto problema... lagi ko yun ginagamit with an adaptor.... so, edi di ko pinoproblema ang lobatt.

tas ayun kanina.. nagulat nalang ako, ...walang batt na nakalagay tas naka adaptor ako... tas nag fflash sa screen, "bt" = lobatt. ....grabe... eh hindi naman diba nalolobatt pag naka adaptor?? ..ayun ginamit ko siya for an hour, ats ayun ayaw mawala nung bt. .............tas may isa pang prob.... nung ginagamit ko... may tym na.. nag hang siya... walang sound tas ayaw mag lipat ng patch, pero.. nag fflash p rin yung bt sign.

guys help!!!!! ~X(

at, by the way, ...tinry kong gamitin siya wihtout the adaptor, batteries lang... ayun, di naman lumabas yung "bt" / lobatt sign. ..................so ang iniisip ko... yung adaptor may prob?

ummmmmmm so, tinry ko yung adaptor ko with another pedal.. ginamit ko sa boston heavy metal ko.. ayun, gumagana naman ng maayos.. walang side efect

tas dalawa po adaptor ko.... parehong ginamit ko dun sa g1x, ayun pareho po lumalabas bt din... pero yung dalawang adaptor naman na yun gumagana ng maayos sa boston ko T.T

HEEEEEEEEELPPPPPPPPPPPPP!!!!!!!!!!!!! T.T/b]

paranoid · « **Reply #906 on:** July 14, 2008, 07:47:21 PM »

@ sir doremi

Taasan niyo yung voltage nung adapter niyo. Yung G1X ata 9 volts ang requirement. Di kasi sufficient yung power nung adapter para sa unit. Then check the polarity of the adapter.

doremi · « **Reply #907 on:** July 14, 2008, 08:51:26 PM »

sir, naka 9 volts naman po... tas, tama rin po yung polarity... ...di rin naman po kasi gagana yun pag baliktad polarity ee

luin_theblue · « **Reply #908 on:** July 14, 2008, 09:49:49 PM »

doremi, generic ba yung power supply mo? Baka kasi by accident na lagay sa 120 volts yung settings ng psu mo tapos dinikit sa 220 volts ng plug. The "bt" thing happened to me also.

Buti nalang may warranty g2 ko so JB gave me a new one. Hehehehehe

ghostalker · « **Reply #909 on:** July 14, 2008, 10:17:11 PM »

pagawa ka nlng k Sir Lemon ng pSU. para isang PSU for some(maybe even for all) your pedals.

Tested naman sa G2 ko. hehe

Quote from: Red_Strat on July 14, 2008, 06:43:24 PM

Oh okay. Thanks!

If the Zoom boys don't mind me asking.. may nakagamit na ba dito ng Digitech RP150? I'm also considering that (alongside the G2). Maybe you guys could tell me which is better in terms of modulations/delay/acoustic sims.

w8 po natin yung iba na nakatry nyan.

rad_12 · « **Reply #910 on:** July 14, 2008, 11:46:53 PM »

check mo yung mA capacity ng adaptor mong gamit mo, baka mababa masyado 300mA or higher mas ok.....much lower mA capacity problema yan it's either unit mo or adaptor mo ang masira. zoom g1x is 9v requirement niya na voltage....

paobagzik · « **Reply #911 on:** July 15, 2008, 05:21:06 AM »

guys do you know someone who can replace a plunger switch sa gfx8 ? yung sa kin kase ayaw na gumana nung switch to select down patches. nung binuksan ko nakita ko sira na yung plunger swith sa ilalim thanks.

xelalien · « **Reply #912 on:** July 15, 2008, 07:07:26 AM »

Quote from: Red_Strat on July 14, 2008, 08:09:32 AM

I'm almost clueless when it comes to multifx.. but I'm thinking of getting a G2 for my modulation/delay sounds. Budget constraints eh. Para wah & PSU na lang ang huling GAS.

So pwede ba kong gumawa ng isang bank na puro lang modulation patches?

maraming forumites din dito ang naka-"hybrid" setup; meaning, may analog dirt pedals, then sa Zoom effects nila hahabulin yung modulation.

personally, laking tulong sa akin ng Zoom noise reduction, Booster (sa wah parameter), and all mods/delays/reverbs. bihira ko rin gamitin yung compressor module, pero in a way nakaktulong din siya.

paranoid · « **Reply #913 on:** July 15, 2008, 04:12:24 PM »

Ilang months warranty nung Zoom s JB?

guitbox · « **Reply #914 on:** July 15, 2008, 04:14:52 PM »

@ doremi
try mo sa zoom na adaptor.

julsam · « **Reply #915 on:** July 15, 2008, 04:16:14 PM »

Quote from: paranoid on July 15, 2008, 04:12:24 PM

Ilang months warranty nung Zoom s JB?

6 months yung g1x ko

Red_Strat · « **Reply #916 on:** July 15, 2008, 06:59:01 PM »

Ilan ba ang patches per bank sa G2.1u?

paranoid · « **Reply #917 on:** July 15, 2008, 07:06:09 PM »

doremi · « **Reply #918 on:** July 15, 2008, 08:02:50 PM »

maayos po adaptors ko... ...sabe naman po ni sir bamf, ...baka daw sira na internal regulator nito :-s

paranoid · « **Reply #919 on:** July 15, 2008, 08:10:46 PM »

Pacheck mo na lang siguro sa service center ng JB.

luin_theblue · « **Reply #920 on:** July 15, 2008, 11:12:15 PM »

Red_Strat: Sa g2, for every letter bank there are 10 patches (e.g., A0, A1-A9, B1 etc. hanggang d9 )

Paranoid: 6 months ang JB Warranty.

Doremi: I'm thinking that kahit na tama yung adaptor mo, nasira yung internal regulator mo dahil hindi recommended yung adaptor mo (changeable yung voltage, na kahit naka set ka sa 9 volts at 220 minsan yung internals ng AC mismo nagloloko).
Get a fixed adaptor.

Like I said, it's happened to me na nasira yung g2 ko dahil sa non-Zoom/Boss/mfx adaptor na 9 volts, at least 300Ma, at (+)-(0)-(-) yung polarity.

Red_Strat · « **Reply #921 on:** July 17, 2008, 02:54:15 PM »

Ayos.. so I have lots of options pala. I'll go for a G2 or G2.1u when I save up enough.

paranoid · « **Reply #922 on:** July 17, 2008, 07:16:14 PM »

Ang mahirap sa G2.1u mapili sa amp to sound less digital..

Nga pala, paano at magakano pamod kay sir riccab ng g7? Don't have ideas on modification..

ghostalker · « **Reply #923 on:** July 17, 2008, 08:56:55 PM »

Quote from: paranoid on July 17, 2008, 07:16:14 PM

Ang mahirap sa G2.1u mapili sa amp to sound less digital..

Nga pala, paano at magakano pamod kay sir riccab ng g7? Don't have ideas on modification..

txt him text @ 09268827704

ytse_neil · « **Reply #924 on:** July 17, 2008, 11:17:44 PM »

Quote from: vegetablejoe on November 07, 2006, 09:32:43 AM

Meron nang Yahoo group for G2 users, if you are interested...

http://launch.groups.yahoo.com/group/zoomg2/

I think meron na rin Pinoy members ito.

yup and im one of those...

News:

Author Topic: ZOOM USERS THREAD: Share your experiences, patches, etc. here! (Read 1151025 times)