hulika

Author Topic: TAMA Drums and Hardware thread  (Read 290613 times)

Offline trasher

  • Senior Member
  • ***
Re: TAMA Drums and Hardware thread
« Reply #750 on: February 01, 2011, 10:15:17 AM »
I don't know kung nai-post na po ito before or hindi pa. Pero kung mayroon na, paki-direct na lang po ako dun sa link. Question ko lang po mga Sir: What can you say about the TAMA Cymbals? Are they durable? Can you compare them to the entry level of Zildjian, Sabian, & Paiste? Who made them, & what are they made of?

Offline Jason@gensan

  • Philmusicus Noobitus
  • *
Re: TAMA Drums and Hardware thread
« Reply #751 on: February 24, 2011, 12:50:03 PM »
Tama Silverstar! Ang pogi! panalo din ang features! hoping to hear it from sir barabbas...

Offline barabbas

  • Veteran Member
  • ****
Re: TAMA Drums and Hardware thread
« Reply #752 on: February 24, 2011, 01:09:55 PM »
Tama Silverstar! Ang pogi! panalo din ang features! hoping to hear it from sir barabbas...

TAMA Silverstar is coming mid this year..... both 5pc and 6pc kits.... Along with TAMA speedcobra pedals single and double....

Offline thunder_god

  • Veteran Member
  • ****
Re: TAMA Drums and Hardware thread
« Reply #753 on: February 25, 2011, 01:48:55 AM »
Its my first time viewing this thread because Im a Pearl owner. I never paid much attention with other brands until I saw all the TAMA kits on this thread. Im now having second thoughts of getting a TAMA kit over my Pearl drum kit.  :-o

Napapaisip na naman ako....  :?

Paganda ng paganda ang TAMA drum kits released last year and this year's NAMM show. They're really a legend in innovation.  :lol: :-D
"I tend to punish my gear so I like the angry Z Customs, while the classic A compliments the destruction."

Offline nickmar

  • Philmusicus Addictus
  • *****
Re: TAMA Drums and Hardware thread
« Reply #754 on: February 25, 2011, 08:53:59 AM »
Napapaisip na naman ako....  :?

Paganda ng paganda ang TAMA drum kits released last year and this year's NAMM show. They're really a legend in innovation.  :lol: :-D
wag ka na magisip idol Thundergod. magshishift ka na from pearl to TAMA tulad ko :lol:
wala kang pagsisisihan :lol:
A full time saiyanman.
I plant trees on my day off.
Respect all. Fear none.


Offline sandythedrummer

  • Philmusicus Addictus
  • *****
Re: TAMA Drums and Hardware thread
« Reply #755 on: February 25, 2011, 12:06:01 PM »
magshishift ka na from pearl to TAMA tulad ko :lol:
wala kang pagsisisihan :lol:


Oo at Bilhin mona yung TAMA na binebenta ni Nikmar na hindi pa gaano na gagamit!

Hehehe! Teka ambilis mona naman ibenta NIK? Wahahah PEACE!!! :-D
"I BELIEVE IN CHRIST LIKE I BELIEVE IN THE SUN. NOT BECAUSE I CAN SEE IT, BUT BY IT, I CAN SEE EVERYONE ELSE....."

Offline nickmar

  • Philmusicus Addictus
  • *****
Re: TAMA Drums and Hardware thread
« Reply #756 on: February 25, 2011, 12:53:39 PM »

Oo at Bilhin mona yung TAMA na binebenta ni Nikmar na hindi pa gaano na gagamit!

Hehehe! Teka ambilis mona naman ibenta NIK? Wahahah PEACE!!! :-D
IDOL GWAPITO SANDY benta ko na yung kit ko pero TAMA drums ulit ang bibilin ko :lol:
A full time saiyanman.
I plant trees on my day off.
Respect all. Fear none.

Offline jefisipbata

  • Philmusicus Addictus
  • *****
Re: TAMA Drums and Hardware thread
« Reply #757 on: February 28, 2011, 06:36:37 PM »
TAMA Silverstar is coming mid this year..... both 5pc and 6pc kits.... Along with TAMA speedcobra pedals single and double....

sir pahingi naman ng price nito kung meron na, pati nung Superstar na kits. thanks!

Offline shinobi_hand

  • Philmusicus Noobitus
  • *
Re: TAMA Drums and Hardware thread
« Reply #758 on: March 22, 2011, 06:25:17 PM »
Mga kapatid dumating na yung pinakahihintay ng lahat.... Pero wala pang Price... Feast your eyes....

TAMA Starclassic Bubinga Elite (Japan)







TAMA Starclassic Bubinga (China)




TAMA Superstar 100% Birch









For Inquiries please Message me to my email add carlomorales03@yahoo.com...
Enjoy God Bless.....







is the red silk still available?
haha super late ku nakita eh
"Put the south in your mouth."

Offline tyrande101

  • Veteran Member
  • ****
Mga poging Philmusicians, Alam po nating lahat na adjustable ang beater head ng Iron Cobra, pwede mo sya igalaw galaw para makuha mo yung right position ng beater head pag tumama sa kick.

ask ko lang kung bakit yung dalawang beater head ng Iron Cobra double peds ko eh umaangat kapag napapadami na ang sipa ko, as in nag ti-tilt pataas specially yung right beater.

*Na-notice ko lang, dati kasi remo encore ang batter head ng bass ko, nabutas na taz nilagyan na lang namin ng duck tape, dun na nag start umangat yung beaters ko.
*Then nag start kaming mag palit ng batter head, pinalitan namin ng Acquarian Super KICK II (double ply), ok na, hindi na umaangat yung mga beaters, but then nanghinayang kami sa batter head na acquarian kasi masyadong mahal so nag decide kaming bumili ng gibraltar kick pad, ang nabili namin yung leather, mejo matigas.
*So nung kinabit namin yung kickpad, aba eh umangat angat nanaman ulit yung dalawang beater head ko. Mas worse pa kapag napaparami double peds ko. Hai nako.. WHAT EMAY GANA DU ?!?!

~♣~ Therefore, napansin ko lang hindi kaya
       dahil hindi pwede tumama sa matitigas
       ang beater head ng iron cobra?
a

Offline Diadem

  • Philmusicus Addictus
  • *****
Mga poging Philmusicians, Alam po nating lahat na adjustable ang beater head ng Iron Cobra, pwede mo sya igalaw galaw para makuha mo yung right position ng beater head pag tumama sa kick.

ask ko lang kung bakit yung dalawang beater head ng Iron Cobra double peds ko eh umaangat kapag napapadami na ang sipa ko, as in nag ti-tilt pataas specially yung right beater.

*Na-notice ko lang, dati kasi remo encore ang batter head ng bass ko, nabutas na taz nilagyan na lang namin ng duck tape, dun na nag start umangat yung beaters ko.
*Then nag start kaming mag palit ng batter head, pinalitan namin ng Acquarian Super KICK II (double ply), ok na, hindi na umaangat yung mga beaters, but then nanghinayang kami sa batter head na acquarian kasi masyadong mahal so nag decide kaming bumili ng gibraltar kick pad, ang nabili namin yung leather, mejo matigas.
*So nung kinabit namin yung kickpad, aba eh umangat angat nanaman ulit yung dalawang beater head ko. Mas worse pa kapag napaparami double peds ko. Hai nako.. WHAT EMAY GANA DU ?!?!

~♣~ Therefore, napansin ko lang hindi kaya
       dahil hindi pwede tumama sa matitigas
       ang beater head ng iron cobra?

sir yung bakal na umiipit dun sa tilter ng beater umuga. you need a pliers to bend it back and re tighten the nut of the beater

Offline pygmea

  • Netizen Level
  • **
Parang nalito ako a...haha, mukang dapat dito ko pinost yung pinost ko lang kanina, "First Time Gear Buyer Questions Here!"...regarding dun sa bakal na umiipit sa beater, kaya ba ng pliers yun? Baka kelangan niyo nang e forge, with anvil de martilyo de old school sword bending techniques. Tumatalab ba soldering iron sa mga ganyang bakal? I've got no idea...

 

Offline tyrande101

  • Veteran Member
  • ****
sir yung bakal na umiipit dun sa tilter ng beater umuga. you need a pliers to bend it back and re tighten the nut of the beater

sir kindly please elaborate your statement, I really need it.. eto pagkakaintindi ko,

a

Offline brokensticks

  • Senior Member
  • ***
Re: TAMA Drums and Hardware thread
« Reply #763 on: April 21, 2011, 11:21:24 PM »
sir barabbas, magpapasok ba kayo ng IC pedal accesorries? gusto ko sana ung speedo ring/quick hook e and DH7 drum hammer.

Offline drummerspoundharder

  • Senior Member
  • ***
Re: TAMA Drums and Hardware thread
« Reply #764 on: April 22, 2011, 01:20:17 PM »
Inupdate ata yung Iron Cobra ha.iba na ichura ng footboard tapos may binago sa bearing housing.

Offline drummerspoundharder

  • Senior Member
  • ***
Re: TAMA Drums and Hardware thread
« Reply #765 on: April 29, 2011, 03:45:20 AM »
pa pm naman ng price ng tama superstar at tama imperialstar.thanks! :-D

Offline dreendroid

  • Veteran Member
  • ****
Re: TAMA Drums and Hardware thread
« Reply #766 on: April 29, 2011, 08:29:31 PM »
satisfied with my choose of color....prng black ksi minsan

Dark Mocha Fade ang color nito.



Offline food.vulture

  • Senior Member
  • ***
Re: TAMA Drums and Hardware thread
« Reply #767 on: April 30, 2011, 02:28:36 AM »
wow!! nice kit sir dreendroid!!  :-)
hopefully i can have one of these lovely 12" snares
simon philips' pageant
mike portnoy's melody master

Offline dreendroid

  • Veteran Member
  • ****
Re: TAMA Drums and Hardware thread
« Reply #768 on: April 30, 2011, 07:11:52 PM »
wow!! nice kit sir dreendroid!!  :-)
hopefully i can have one of these lovely 12" snares
simon philips' pageant
mike portnoy's melody master

go for the portnoy \m/
just sayin...haha
default nga lng un sakin eh. pero satisfied n rin nmn ako....s bday n lng kkuwa ng signature snare :D

Offline dreendroid

  • Veteran Member
  • ****
Re: TAMA Drums and Hardware thread
« Reply #769 on: April 30, 2011, 07:18:27 PM »
dont call me sir...ahaha. 14 lng ako :)

Offline pedaldeaf3

  • Philmusicus Addictus
  • *****
Re: TAMA Drums and Hardware thread
« Reply #770 on: April 30, 2011, 08:23:00 PM »
dont call me sir...ahaha. 14 lng ako :)

Masasanay ka din dyan sir, that's how we show respect here in PM especially in PD... :-D
« Last Edit: April 30, 2011, 11:35:44 PM by pedaldeaf3 »
God is the mighty "RAK" of my salvation "EN" he want's me to "ROL" forward & follow him...

Offline dreendroid

  • Veteran Member
  • ****
Re: TAMA Drums and Hardware thread
« Reply #771 on: April 30, 2011, 10:27:44 PM »
sa
Masasanay ka din dyan sir, that's how we show respect here in PM especially in PD... :-D

Okay sir! :D

Offline food.vulture

  • Senior Member
  • ***
Re: TAMA Drums and Hardware thread
« Reply #772 on: May 01, 2011, 04:11:16 AM »
Masasanay ka din dyan sir, that's how we show respect here in PM especially in PD... :-D
mismo! yes sir! :-D
@dreendoid: hahaha MP fan ka ano?? i'm still choosing kasi whether to go with a steel shell or a wood shell that is 12".. and this time, i wanted it to be a tama snare. but, thanks for sayin'.. will consider :-)

Offline dreendroid

  • Veteran Member
  • ****
Re: TAMA Drums and Hardware thread
« Reply #773 on: May 01, 2011, 10:44:30 AM »
mismo! yes sir! :-D
@dreendoid: hahaha MP fan ka ano?? i'm still choosing kasi whether to go with a steel shell or a wood shell that is 12".. and this time, i wanted it to be a tama snare. but, thanks for sayin'.. will consider :-)

ndi nmn fan...but rather an admirer lng. haha :D

pls avoid text speak please - mod
« Last Edit: May 09, 2011, 04:52:36 PM by Riff_6603 »

Offline glennaui

  • Forum Fanatic
  • ****
Yowh Guys, please enlightened me on this...

Whats the difference between IC's Rolling and Power Glide?
How are they differ?
What are their strength and weaknesses?


I need a quick reply... :|

Thanks...! :-D