Author Topic: Strymon Pedals (Read 49642 times)

teleclem · « **Reply #100 on:** October 01, 2012, 10:46:37 PM »

Modfactor killer haha

Buti nalang wala nang kasya sa board ko..

nepenthe · « **Reply #101 on:** October 02, 2012, 12:08:04 AM »

Quote from: teleclem on October 01, 2012, 10:46:37 PM

Modfactor killer haha

Buti nalang wala nang kasya sa board ko..

GAS will make a way Jan haha

cumbersome · « **Reply #102 on:** October 03, 2012, 11:18:32 PM »

Question for Timeline users: it seems that if you want to use the looper with the pedal bypassed, it always follows the settings of the bank you're on, such that sometimes, it won't record if the Persist setting is off in that patch. Tried setting the bypass to buffered but no cigar. The workaround seems to be setting it on a patch with Persist set on, turning it off then looping from there. Thoughts?

freemansj · « **Reply #103 on:** October 16, 2012, 10:56:21 AM »

Timeline users... Anong power supply ang gamit nyo?

PP2+ ang powers upply ko e. Nabasa ko somewhere na hindi daw sya recommended na gamitin sa Timeline.

Gamitin ko na lang yung kasama nya na power supply?

nepenthe · « **Reply #104 on:** October 16, 2012, 11:05:36 AM »

Quote from: cumbersome on October 03, 2012, 11:18:32 PM

Question for Timeline users: it seems that if you want to use the looper with the pedal bypassed, it always follows the settings of the bank you're on, such that sometimes, it won't record if the Persist setting is off in that patch. Tried setting the bypass to buffered but no cigar. The workaround seems to be setting it on a patch with Persist set on, turning it off then looping from there. Thoughts?

yo papi joel, PM mo si Sir Rey, sya at si Jan lang ang kilala ko who uses their Timeline extensively.

Pete, Cioks yung power supply ni Jan hehe.

freemansj · « **Reply #105 on:** October 16, 2012, 11:13:28 AM »

Quote from: nepenthe on October 16, 2012, 11:05:36 AM

Pete, Cioks yung power supply ni Jan hehe.

Paktay tayo dyan!

doubletrouble · « **Reply #106 on:** October 16, 2012, 11:17:27 AM »

Quote from: freemansj on October 16, 2012, 11:13:28 AM

Paktay tayo dyan!

ayun na! balita naman diyan!

freemansj · « **Reply #107 on:** October 16, 2012, 11:59:14 AM »

Quote from: doubletrouble on October 16, 2012, 11:17:27 AM

ayun na! balita naman diyan!

Padating na yata e. Hehehe...

free2rock · « **Reply #108 on:** October 16, 2012, 12:18:57 PM »

Switch to Cioks DC8! PT Jr ka lang naman diba?

freemansj · « **Reply #109 on:** October 16, 2012, 12:20:36 PM »

Quote from: free2rock on October 16, 2012, 12:18:57 PM

Switch to Cioks DC8! PT Jr ka lang naman diba?

Yeah. Hindi na. Gamitin ko na lang yung power supply na kasama ng Timeline tapos doon ko isasaksak sa courtesy outlet ng PP2+.

kernelsalonpas · « **Reply #110 on:** October 16, 2012, 12:54:12 PM »

Quote from: freemansj on October 16, 2012, 12:20:36 PM

Yeah. Hindi na. Gamitin ko na lang yung power supply na kasama ng Timeline tapos doon ko isasaksak sa courtesy outlet ng PP2+.

wow pp2+. you already!

patry nyang timeline ha papa pete.

freemansj · « **Reply #111 on:** October 16, 2012, 01:00:55 PM »

Quote from: kernelsalonpas on October 16, 2012, 12:54:12 PM

wow pp2+. you already!

patry nyang timeline ha papa pete.

LOL! Sa yo nga Cioks e!

Sure! Tone party ulit!

free2rock · « **Reply #112 on:** October 16, 2012, 04:58:47 PM »

Quote from: freemansj on October 16, 2012, 01:00:55 PM

LOL! Sa yo nga Cioks e!

Sure! Tone party ulit!

Your timeline deserve the best. Hihihi!

spankyrigor · « **Reply #113 on:** October 23, 2012, 01:28:01 AM »

Quote from: freemansj on October 16, 2012, 10:56:21 AM

Timeline users... Anong power supply ang gamit nyo?

PP2+ ang powers upply ko e. Nabasa ko somewhere na hindi daw sya recommended na gamitin sa Timeline.

Gamitin ko na lang yung kasama nya na power supply?

From a user in the Voodoo Lab Forums:

I just got done measuring the actual current draw of a Timeline and it actually draws less than 250mA in any mode... this means that the Strymon Timeline can be powered directly from output 5 or 6 on a Pedal Power 2+ with the corresponding DIP switch set to Normal using one of the supplied standard barrel cables.

However if you're using another Strymon pedal, the ideal setup seems to be to plug the first pedal (Flint, Bluesky, etc) onto one of the high-powered outputs (5 or 6), then to power the Timeline using a current doubler to jumper 2 outputs: one from 1-4, then another from 5 or 6.

Parang hindi ko ata na-gets yung sinulat ko. hahaha.

freemansj · « **Reply #114 on:** October 23, 2012, 05:36:42 AM »

Quote from: spankyrigor on October 23, 2012, 01:28:01 AM

From a user in the Voodoo Lab Forums:

I just got done measuring the actual current draw of a Timeline and it actually draws less than 250mA in any mode... this means that the Strymon Timeline can be powered directly from output 5 or 6 on a Pedal Power 2+ with the corresponding DIP switch set to Normal using one of the supplied standard barrel cables.

However if you're using another Strymon pedal, the ideal setup seems to be to plug the first pedal (Flint, Bluesky, etc) onto one of the high-powered outputs (5 or 6), then to power the Timeline using a current doubler to jumper 2 outputs: one from 1-4, then another from 5 or 6.

Parang hindi ko ata na-gets yung sinulat ko. hahaha.

Hahaha! Nabasa ko din yan nung nagre-research ako, bro. Hindi ko din naintindihan! Hahahaha!

spankyrigor · « **Reply #115 on:** October 23, 2012, 07:33:23 AM »

Quote from: freemansj on October 23, 2012, 05:36:42 AM

Hahaha! Nabasa ko din yan nung nagre-research ako, bro. Hindi ko din naintindihan! Hahahaha!

Hahahaha

Bottom line is yes it shouldn't be a problem; just make sure you plug it into 5 or 6 with the Dip switches in the Normal position.

Those outputs "officially" give only 250mA each, but apparently Voodoo Lab was just playing it safe and overdesigned it to give more juice than indicated.
On the other hand the Timeline "officially" needs 250mA (300mA?), but apparently Strymon was just playing it safe also; it needs less than that.

MYN11 · « **Reply #116 on:** October 23, 2012, 09:16:10 AM »

Quote from: freemansj on October 16, 2012, 10:56:21 AM

Timeline users... Anong power supply ang gamit nyo?

PP2+ ang powers upply ko e. Nabasa ko somewhere na hindi daw sya recommended na gamitin sa Timeline.

Gamitin ko na lang yung kasama nya na power supply?

Bro, I'm just using a Dunlop DC Brick. So far ok naman. Minsan kasi pag nag-research pa ng mas malalim dumadami lang ang di maiintindihan hahaha! We're supposed to be playing and enjoying not turning into electricians and scientists hehe. Basta ok naman ang tone then the supply of power is sufficient

Quote from: cumbersome on October 03, 2012, 11:18:32 PM

Question for Timeline users: it seems that if you want to use the looper with the pedal bypassed, it always follows the settings of the bank you're on, such that sometimes, it won't record if the Persist setting is off in that patch. Tried setting the bypass to buffered but no cigar. The workaround seems to be setting it on a patch with Persist set on, turning it off then looping from there. Thoughts?

Will try this one pag nagkaron ng time. Di ko pa na-encounter ito as I'm not using its looper extensively.

freemansj · « **Reply #117 on:** October 23, 2012, 10:00:25 AM »

Quote from: spankyrigor on October 23, 2012, 07:33:23 AM

Hahahaha

Bottom line is yes it shouldn't be a problem; just make sure you plug it into 5 or 6 with the Dip switches in the Normal position.

Those outputs "officially" give only 250mA each, but apparently Voodoo Lab was just playing it safe and overdesigned it to give more juice than indicated.
On the other hand the Timeline "officially" needs 250mA (300mA?), but apparently Strymon was just playing it safe also; it needs less than that.

Kaso bro pag sinaksak yung Timeline sa either 5 or 6, hindi na pwede gamitin yung isa pang slot (5 or 6 din)? Hay nako! Ewan ko ba! LOL!

Quote from: MYN11 on October 23, 2012, 09:16:10 AM

Bro, I'm just using a Dunlop DC Brick. So far ok naman. Minsan kasi pag nag-research pa ng mas malalim dumadami lang ang di maiintindihan hahaha! We're supposed to be playing and enjoying not turning into electricians and scientists hehe. Basta ok naman ang tone then the supply of power is sufficient

Baka kasi masira, idol. Wala na akong pambili ulit.