Electronic/Digital Drum Equipment Thread

[sonicassault]

Behringer is at it again! Matibay kaya to?



Sent from my iPhone using Tapatalk

[sonicassault]

~

[Ralph_Petrucci]

Behringer is at it again! Matibay kaya to?



Sent from my iPhone using Tapatalk

hahaha kumusta kaya tunog nito?

[harugrugrug]

looked at youtube. i think you should decide na lang,hehe id prefer acoustic drums talaga.

[Ralph_Petrucci]

looked at youtube. i think you should decide na lang,hehe id prefer acoustic drums talaga.

lam mo naman paps, taga condo

[harugrugrug]

lam mo naman paps, taga condo

hahaha! pero maganda yung feel ng edrums mo. feel ko change ng dynamics

tsaka that comment was meant for that  edrums na pinost ni papsi sonic 

[Vdrums Freak]

Alesis Strike Pro Kit Electronic Drum Kit
Heto na kaya ang magiging pamatay ng Alesis sa Roland Vdrums?
https://www.youtube.com/watch?v=HuJ4EtPZZ_I
https://www.youtube.com/watch?v=UyP4pHFAv3w

[g0d5_g1ft]

uy mukang maganda, I hope it integrates better with addictive/superior... will be selling my dm10x (upgraded to mesh heads) soon I think

[Vdrums Freak]

uy mukang maganda, I hope it integrates better with addictive/superior... will be selling my dm10x (upgraded to mesh heads) soon I think

Im hoping that alesis would enhance their module's velocity layers of triggering..but according to some forum's thread the new alesis flagship module supports 40 velocity with 60 horizontal layers with round robin technology to eliminate the machine gun effect and has 8gb of internal memory and that dreaded hotspot on roland mesh heads(center piezo) could be lessen on alesis new drum pads with 12 foam columns attached to a single center piezo...

Another product that's already on the market to check out is the new ATV AD5 which supports different kind of trigger pads even on hihats/3 zone ride and snare from different manufacturers and this module's built in sound is sample based from acoustic counterparts in multilayers foundation...
http://www.atvcorporation.com/en/products/drums/ad5/

[g0d5_g1ft]

12 foam columns attached to a single center piezo...

this is the mod I used for my 12inch pads, I used 8 foam cut outs to disperse the full force of the hit... it actually works quite well, even if I hit the cones directly I dont get an overly exagerated velocity ready.

I think they started this pattern from the -mesh kits they came out with in 2014/2015 so this new one holds a lot of promise, maybe I'll get a chance to own one if amazon ships it to Qatar lol

[Vdrums Freak]

this is the mod I used for my 12inch pads, I used 8 foam cut outs to disperse the full force of the hit... it actually works quite well, even if I hit the cones directly I dont get an overly exagerated velocity ready.

Will this mod work on roland modules and pads? im sick of hotspot when I hit the center zone of my trigger pads especially when Im triggering vst, you can't help but notice the sudden jump of velocity.

[g0d5_g1ft]

I dont know the internals of the vdrums, but in theory it should work...

[Vdrums Freak]

but in theory it should work...

Thanks, I'll try it with my DIY snare. hope it'll work fine..

[Vdrums Freak]

Anyone using Alto TS115A 800watts for drum amps?..muffled kasi sya pg na reach na ung peak level for certain amount of time na panay palo sa crash at open hihat. Mas maganda ba yung Samson Auro D415 compare sa Alto?

[peeves24]

underpowered yung alto mo, baka mas maganda magdagdag ka na lang kesa magpalit ng ibang brand.

alto sounds better than samson.

[Ralph_Petrucci]

underpowered yung alto mo, baka mas maganda magdagdag ka na lang kesa magpalit ng ibang brand.

alto sounds better than samson.

really paps? sino mas matibay?

[Xelly]

really paps? sino mas matibay?

3-yr user of Samson D415 for drums. Solve! Pero kailangan stereo. Hirap si D415 kapag isa lang(mono).

[Ralph_Petrucci]

3-yr user of Samson D415 for drums. Solve! Pero kailangan stereo. Hirap si D415 kapag isa lang(mono).

sooo... alto or Samson huhuhuhuhuhu miss you paps sep HAHAHAHA

[peeves24]

really paps? sino mas matibay?

dont know pre. nag samson ako dati kasi mas mura sa alto. pero nung narinig ko alto, mas balanced sya kesa samson. pero kung may driverack ka naman, doesnt matter which one you get

[Ralph_Petrucci]

dont know pre. nag samson ako dati kasi mas mura sa alto. pero nung narinig ko alto, mas balanced sya kesa samson. pero kung may driverack ka naman, doesnt matter which one you get

sorry mej OT, was planning on getting an ALTO MIXPACK express kasi.

[Vdrums Freak]

underpowered yung alto mo, baka mas maganda magdagdag ka na lang kesa magpalit ng ibang brand.

alto sounds better than samson.

For the mean time ano pa po kaya yung posible na paraan pra magamit ko ng maayos yung alto hanggat di pa ako nkabili ng dagdag. Na try ko rin iplug sa mixer pero ganon pa rin khit sa balance XLR sa line input 1&2 (L/R). Na try ko rin na On/Off yung Contour pero ganon prin  yung result. D kya kelangan ko pa ng another device pra ma bypass yung contour/signal limit ng amps?

[peeves24]

add ka sub

[Vdrums Freak]

add ka sub

Hehe parang ganon prin ung kalalabasan pag dating sa budget  ..anyways, thanks sa advice \m/

[ken minneman]

Help! yung bass drum ng aking alesis DM6 di tumutunog. Di naman ako lagi sa bahay pero pagtingin ko kasi 1 time mejo iba na posisyon pati rack. Baka nabagsakan o nagalaw. Haist.

Here's what I did, tested the trigger by putting the crash cymbal's jack. Tumunog naman so working yung trigger ng bass. tapos linipat ko trigger ng bass sa crash. Di tumunog. Well either yung wire or yung mismong Module may problema. Pero problema sa wiring ng alesis DM6 is magkakasama kasi sila.

To see image, Check this link: http://www.newenglandmusicsupply.com/images/uploads/alesis-dm6-cables-sm.JPG

San ba may nag aayos ng Edrums. Binili ko to sa classifieds so I think walang warranty. Mejo Wala pa ako masyado alam sa E drums. Need assistance. haha..

[Vdrums Freak]

Here's what I did, tested the trigger by putting the crash cymbal's jack. Tumunog naman so working yung trigger ng bass. tapos linipat ko trigger ng bass sa crash. Di tumunog. Well either yung wire or yung mismong Module may problema. Pero problema sa wiring ng alesis DM6 is magkakasama kasi sila.

Naka experience na rin dati ako ng ganyang issue sa ekit ko so tnry ko rin ung gaya sayo pero my indication sa module nya na gumagana ung trigger kc ung LED makikita mong umiilaw kapag nkapick up ng signal from trigger kaya tiningnan ko muna sa mga settings sa module kung my nabago pro d ko mahanap kaya factory reset nlng ung last resort ko tas tumunog na ulit ung input from trigger. Hirap kc pg ganyang cable pag nasira mahirap ayusin or bibili ka ng bago.