Author Topic: cleaning the guitar (Read 31033 times)

JPage · « **Reply #100 on:** November 02, 2008, 04:56:17 AM »

zonrox

ghostalker · « **Reply #101 on:** November 02, 2008, 07:20:47 AM »

Quote from: BlackDiamond on November 01, 2008, 01:57:58 PM

No need for a guitar polish. I use Pledge before but after some time, you will see swirl marks.

then I discovered.

"For that scratch free cleaning"

P124.75 (1 piece) lang sa Handyman in Robinson's malls

super lambot siya, non-abrasive at hindi mo na kelangan ng additional cleaning agents to get the job done.

I have black guitars and it's a chore to clean the body (I clean my guitars after I play 'em).

After playing, yung sweat stains na naiwan sa finish... TANGGAL AGAD sa isang punasan lang! Look ma, no guitar polish involved!

Unlike kapag planela gamit mo na ilang punaspunas pa para matanggal ung sweat marks sa body... time consuming at baka may maiwan ba na swirl marks! heheheh

I got the idea sa Planet Waves site coz may product rin sila na micro-fiber cloth meant for instrument care...

MICRO-FIBER CLOTH

The Planet Waves Micro-Fiber polishing cloth acts like a magnet for dust, dirt, and oils, and lasts considerably longer than ordinary cloths. Woven from microscopic fibers, the Planet Waves Micro-Fiber Cloth is 10 times finer than silk, up to 30 times finer than cotton, and 100 times finer than a human hair. The fibers are woven into masses of tiny "hooks & loops" which cut through stains, attracting and absorbing dirt, smudges, and microparticles that ordinary cloths cannot reachor remove.
Best of all, the Micro-Fiber polishing cloth needs only minimal polish or no polish at all!

May mga micro-fiber cloth meant sa sasakyan pero hindi yun yung kinuha ko. Yung kinuha ko yung may picture ng furniture coz like the guitar, kahoy yun eh. Takot ako magasgas ung guitar ko! heheheh

I just wished I discovered this at an earlier time para naiwasan magkaroon ng swirl marks yung iba kung guitars. haaaaaaaaay!

dapat bayaran ka nila sa pag-ADS hehe.
meron ako gamit similar dyan, 3M yata yung brand, parang gaza na kulay puti. At saka yung free na pamunas dun sa binili kong screen protector sa cellphone.

Rion_017 · « **Reply #102 on:** August 23, 2009, 10:44:46 PM »

Question po... panu kung Custom painted yung guitar? kasi nabili ko yung guitar ko custom painted sya... naka air brush yata, pero di ako sure... panu ko kaya papakintabin yun? natatakot ako ma damage yung paint e... thanks...

paeng · « **Reply #103 on:** July 13, 2010, 05:03:21 PM »

Quote from: inverted_hate on March 18, 2008, 06:08:38 AM

thanks i think i'll get one...btw (a bit O.T.) i remembered asking a dude in a music store here if that ernie ball guitar polish can be used on my weathered finish guitar and he replied "alam ko hindi pwede sa finish na yun..." and so i asked again if he could suggest a brand or something to use on my guitar and his reply "wala ako alam..." sorry guys i should posted this story on a different thread and too bad for that dude in the music store which proves his credibility...anyways thanks again for the advice

Effective ba 'to? Ngayon kasi flat black din gitara ko so di ko alam kung ano tamang panglinis. Iniisip ko kasi baka kumintab yung gitara pag tagal e. Gusto ko mapanatili yung finish nya. Any suggestions?

r_chino18 · « **Reply #104 on:** July 13, 2010, 05:59:22 PM »

Quote from: paeng on July 13, 2010, 05:03:21 PM

Effective ba 'to? Ngayon kasi flat black din gitara ko so di ko alam kung ano tamang panglinis. Iniisip ko kasi baka kumintab yung gitara pag tagal e. Gusto ko mapanatili yung finish nya. Any suggestions?

pag flat lang ang finish, no need for other "gloss polishes".. i have a PRS SE Standard na matte lang ang finish, my bro has an Ibanez RG321 na flat black lang din.. hindi talaga sila kikintab, what we use is a 3M microfiber cloth.. effective siya sa pagtanggal ng fingerprints at ibang sweat marks..

paeng · « **Reply #105 on:** July 13, 2010, 06:41:21 PM »

Quote from: r_chino18 on July 13, 2010, 05:59:22 PM

pag flat lang ang finish, no need for other "gloss polishes".. i have a PRS SE Standard na matte lang ang finish, my bro has an Ibanez RG321 na flat black lang din.. hindi talaga sila kikintab, what we use is a 3M microfiber cloth.. effective siya sa pagtanggal ng fingerprints at ibang sweat marks..

Salamat sa reply.
So ibig mong sabihin plain cloth lang talaga sir wala ng gagamiting panlinis na kemikal, etc?

pualux · « **Reply #106 on:** July 13, 2010, 06:46:54 PM »

Quote from: paeng on July 13, 2010, 06:41:21 PM

Salamat sa reply.
So ibig mong sabihin plain cloth lang talaga sir wala ng gagamiting panlinis na kemikal, etc?

yep

juan_portnoy · « **Reply #107 on:** July 13, 2010, 06:59:46 PM »

Rich Harris says it best:

http://www.ibanezrules.com/tech/grunge/grunge_1.htm

I haven't back read so if this was posted already I apologize hehe

r_chino18 · « **Reply #108 on:** July 13, 2010, 07:18:46 PM »

Quote from: paeng on July 13, 2010, 06:41:21 PM

Salamat sa reply.
So ibig mong sabihin plain cloth lang talaga sir wala ng gagamiting panlinis na kemikal, etc?

yes bro.. walang chemical.. iba yung plain cloth kesa microfiber cloth eh.. mas sosyal ng konte yung microfiber cloth, nilalabhan lang din siya normally pag madumi na.. pero iba txture niya kesa plain cloth..

a plain cloth might take you forever (exagge) para matanggal yung sweat marks at fingerprints sa satin/flat/matte na finish.. pero yung microfiber cloth, ilang wipes lang makikita mo mawawala na yun..

3M is a good brand.. meron niyan sa handyman.. forgot the price though..

ifileftthezoo · « **Reply #109 on:** January 04, 2011, 01:11:38 PM »

pwede ba ang GLO Metal Polish na pang linis sa mga hardwares (tail, pick up cover, screws, bridge, machine heads, strap holders etc) ng LP?

r_chino18 · « **Reply #110 on:** January 04, 2011, 02:33:29 PM »

Quote from: ifileftthezoo on January 04, 2011, 01:11:38 PM

pwede ba ang GLO Metal Polish na pang linis sa mga hardwares (tail, pick up cover, screws, bridge, machine heads, strap holders etc) ng LP?

Pag hindi mo napunasan ng maayos, may mga white na residue na tumitigas dun sa mga singit-singit ng mga pyesa. Mas dumudumi itsura over time.

ifileftthezoo · « **Reply #111 on:** January 04, 2011, 06:05:06 PM »

Quote from: r_chino18 on January 04, 2011, 02:33:29 PM

Pag hindi mo napunasan ng maayos, may mga white na residue na tumitigas dun sa mga singit-singit ng mga pyesa. Mas dumudumi itsura over time.

ah ok... ano ba pang linis ng mga hardware?

fadetogrey · « **Reply #112 on:** January 05, 2011, 01:02:08 AM »

ano ba pwedeng pang linis sa machine heads, tailpiece, bridge, screws, humbucker pickup covers ng Les Paul?

fadetogrey · « **Reply #113 on:** January 06, 2011, 11:37:58 AM »

Quote from: Opay21 on September 18, 2008, 12:14:19 AM

ang WD-40 ba pwede rin sa ibang hardware ng gitara?? i.e. saddles, PUP rings, screws, mga ganon??

magkano wd-40? san nakakabili nito?

r_chino18 · « **Reply #114 on:** January 06, 2011, 11:59:48 AM »

Quote from: fadetogrey on January 06, 2011, 11:37:58 AM

magkano wd-40? san nakakabili nito?

Less than 150php yung isang regular sized na spray can. Meron sa Handyman. I'm sure meron din sa ACE.

fadetogrey · « **Reply #115 on:** January 06, 2011, 01:42:09 PM »

Quote from: r_chino18 on January 06, 2011, 11:59:48 AM

Less than 150php yung isang regular sized na spray can. Meron sa Handyman. I'm sure meron din sa ACE.

Thanks bro!

free2rock · « **Reply #116 on:** January 07, 2011, 07:39:53 AM »

Quote from: Rion_017 on August 23, 2009, 10:44:46 PM

Question po... panu kung Custom painted yung guitar? kasi nabili ko yung guitar ko custom painted sya... naka air brush yata, pero di ako sure... panu ko kaya papakintabin yun? natatakot ako ma damage yung paint e... thanks...

You can spray a THIN coat of clear lacquer. Wet sand or rubbing compound. Then wax.

PhosHilaron · « **Reply #117 on:** January 12, 2011, 11:46:55 AM »

Nakakatanggal ba ng kalawang ang WD40?

Baking Soda ba nakakatanggal din ng rust?

r_chino18 · « **Reply #118 on:** January 12, 2011, 03:21:22 PM »

Quote from: PhosHilaron on January 12, 2011, 11:46:55 AM

Nakakatanggal ba ng kalawang ang WD40?

A bit. Depende sa extent ng kalawang. Pag sobrang grabe, di niya kaya tanggalin totally. WD starts for Water Displacement. It primarily gets the water out, isa sa ingredients ng rust.

Quote

Baking Soda ba nakakatanggal din ng rust?

Haven't tried.

mikki_blinkme · « **Reply #119 on:** January 12, 2011, 03:37:45 PM »

buti pinaalala nyo... maglilinis nga pala ako ng gitara ko... naglilibag na yung body e.

PhosHilaron · « **Reply #120 on:** January 14, 2011, 11:47:11 AM »

ano pinakamabisang pang tanggal ng kalawang?

PhosHilaron · « **Reply #121 on:** January 17, 2011, 01:20:57 PM »

Quote from: PhosHilaron on January 14, 2011, 11:47:11 AM

ano pinakamabisang pang tanggal ng kalawang?

^

indiemaxx · « **Reply #122 on:** April 11, 2011, 07:27:15 AM »

mga bossing meron ba cleaner na pwede sa string and pwede ren sa fretboard na di maapektuhan yung kulay ng board, mag fade or something...?

Jejan · « **Reply #123 on:** April 11, 2011, 08:10:33 AM »

Hanggang ngayon ba eh PLEDGE pa din gamit niyo? Delikado yun mga sir! Masisira ang finish and papangit ang kulay ng gitara niyo. Hindi porke panglinis ng kahoy ang PLEDGE eh pwede na 'to sa gitara.

chupao · « **Reply #124 on:** April 11, 2011, 11:18:40 AM »

Quote from: Jejan on April 11, 2011, 08:10:33 AM

Hanggang ngayon ba eh PLEDGE pa din gamit niyo? Delikado yun mga sir! Masisira ang finish and papangit ang kulay ng gitara niyo. Hindi porke panglinis ng kahoy ang PLEDGE eh pwede na 'to sa gitara.

so sir ano kaya pinaka pwede siguro punas lang talaga noh ?

gumamet ako ng turtle wax dati sa gitara okay naman siya..

News:

Author Topic: cleaning the guitar (Read 31033 times)

PhosHilaron

PhosHilaron

PhosHilaron