Hellow po post ko lang po yung mga ginawa ko na mga hardwares, since wala po ako pambili ng aftermarket and hi end, i made my own po , also created my own designs
i hope makatulong and maka inspire po sa ating fellow drummers
part1: DIY suspension mounts for toms
part2: DIY bass drum spursDIY Suspension Tom Mounts:made from 100% stainless flat bars, 3mm x .7inches thick
simply cut it by a grinder,
curved it by a hammer,
weld it using stainless welding rod
fittings to the tom
making the mounts for the aftermarket tom mount
making bushing for eliminating metal to metal contact
buffing by sanding disc
clear top coat using a typical acrylic paint, dry and done
DIY Bass Drum Spurs:100% stainless round bars about 16mm diameter
bend into form,
make a concept
build a design
cut into pieces by cutting disc grinder
weld, use minimum amp if possible so metal would not melt too wide
grinding disc
weld again,
complete the design
make a pointed end for grip
buffing by sanding disc
clear coat
