Ibanez guitar users thread

[CeL1916]

Ibanez Prestige Rg1527 with Seymour Duncan Blackouts AHB-1 Active Pickups

www.facebook.com/maschalismos

Man this guy is everywhere.

[zasam_4]

Man this guy is everywhere.

pansin ko din kasi yung RG1527 tagal na sa olx


Sent from my iPhone using Tapatalk

[Drac]

Huuh Grabe nahiya naman ako mag post dito sa dami ng mga Ibanez na prestige na collection niyo parang Music store na kayo.

Dalawa lang gitara ko isang RG220 and RG1570!!!

[LaXter]

San kaya ako makakabili ng saddle lockdown nut ng edge pro? I seem to have stripped one 

[Gunslinger]

San kaya ako makakabili ng saddle lockdown nut ng edge pro? I seem to have stripped one 

If wala sa Audiophile, try http://www.ibanezrules.com/

[ytse_neil]

Question po: Tingin nio legit to? https://www.facebook.com/groups/Instrumentsforsale/permalink/1201748723246270/?sale_post_id=1201748723246270

MIK daw 

Thanks

[LaXter]

If wala sa Audiophile, try http://www.ibanezrules.com/

Thanks man!

[Drac]

San kaya ako makakabili ng saddle lockdown nut ng edge pro? I seem to have stripped one 

Yun nga din ang iniisip ko badtrip kasi itong Ibanez pa iba iba bridge na ginamit sa mga High End nila since 2003, nakaka pikon na nga eh sana kasi nag stick na lang sila sa Edge and Lo Pro.

Pag ako naasar papa ayos ko sa Luthier yung guitara at palagyan ko ng original edge or lo pro kahit ayusin na lang yung routing kasi in the long run wala na tayo makukuha na parts for Edge Pro
dahil discontinued na yun!!.

[david_leyson]

IMHO. does not look like one legit to me.

[Van*]

IMHO. does not look like one legit to me.

Which one?

Yun nga din ang iniisip ko badtrip kasi itong Ibanez pa iba iba bridge na ginamit sa mga High End nila since 2003, nakaka pikon na nga eh sana kasi nag stick na lang sila sa Edge and Lo Pro.

Pag ako naasar papa ayos ko sa Luthier yung guitara at palagyan ko ng original edge or lo pro kahit ayusin na lang yung routing kasi in the long run wala na tayo makukuha na parts for Edge Pro
dahil discontinued na yun!!.

Go OFR.

[spoonbender]

Yun nga din ang iniisip ko badtrip kasi itong Ibanez pa iba iba bridge na ginamit sa mga High End nila since 2003, nakaka pikon na nga eh sana kasi nag stick na lang sila sa Edge and Lo Pro.

Pag ako naasar papa ayos ko sa Luthier yung guitara at palagyan ko ng original edge or lo pro kahit ayusin na lang yung routing kasi in the long run wala na tayo makukuha na parts for Edge Pro
dahil discontinued na yun!!.

Replaced my RG1570's Edge Pro with a Gotoh GE1996T, needed some routing work though.

[Drac]

Replaced my RG1570's Edge Pro with a Gotoh GE1996T, needed some routing work though.

Bagay nga yang Gotoh sa RG1570,  Gotoh din kasi nag manufacture ng Edge Pro, Lo Pro and the Original Edge..

Sir may locking studs ang Gotoh diba?? Nice!!! Very stable daw yan!!

Post ka pa ng picture niyang RG1570 mo ang ganda ng dating!!!


IMHO

Mas bagay sa mga RG ang Gotoh because of its similarity to the Orginal Edge!!

Parang RG570 Reissue ang dating!!!

I will ask Jon of Guitar one kung magkano over all kasama na routing work.... anyway almost any other replacement will need routing work kahit Lo Pro or original Edge..

I know mas maganda ang Gotoh because of the locking studs and I think the sustain block is better..

But I am such a Ibanez fan boy I want to replace mine with the same Edge pro but since its discontinued I might look for a Gloss Black Edge or Lo pro..

I don't like the esthetics of the cosmo black hardware on a black guitar body I prefer true gloss black..  And it seems mas mabilis mag corrode and tarnish ang Cosmo black saakin
pasmado kasi ako kahit anung Punas at wala after 3 years.. Ganito na!!


Pero yung mga pipitsugin na single locking Floyd type ko sa RG220 ko kahit 15 years na mahigit hindi parin na babakbak kahit na napabayaan yung bridge... nalubog pa sa baha yun!!


Sobrang mapili ako sa gitara at napaka arte ko.....  hayz buhay talaga hirap makuntento..


I painted the Edge pro on my RG1570 yung base plate lang naman not so much for esthetics para lang wag kalawangin madungis kasi ako!!!! Hahahaha..



Siguro if ever na masira yung bridge nung saa akin Gotoh ipapalit ko mostlikely kasi mahirap mag hanap ng Lo pro and Original Edge.. Lalo na Edge pro!!!!

Ano oppinion ninyo sir sa Edge Zero yung mga nasa Prestige and what about Edge Zero 2 hindi ko pa nasusubukan yung mga yun but I don't the appearance!!!

Hayzz ang arte ko talaga....
hahaha

[fourth_cycle]

Mga sirs magtatanung lng kung meron sa inyo dito nakagamit ng ganitong replacement for ibanez 5 way selector switch

[spoonbender]

Bagay nga yang Gotoh sa RG1570,  Gotoh din kasi nag manufacture ng Edge Pro, Lo Pro and the Original Edge..

Sir may locking studs ang Gotoh diba?? Nice!!! Very stable daw yan!!

Post ka pa ng picture niyang RG1570 mo ang ganda ng dating!!!

[spoonbender]

Mga sirs magtatanung lng kung meron sa inyo dito nakagamit ng ganitong replacement for ibanez 5 way selector switch

You can use wiring diagrams here:

http://www.dimarzio.com/support/wiring-diagrams#1-1-2

Pero Coretek switch yung IBZ 5-way. So need mo pa i-match kung alin yung terminals.

[fourth_cycle]

meron ba dito sir nag bebenta ng coretek switch?

[spoonbender]

meron ba dito sir nag bebenta ng coretek switch?

epektos.com
kaso yung for HSH lang.
http://www.epektos.com/product/ef8dbf99-148a-4dd5-b8d8-c2c622a62129.aspx

[fourth_cycle]

ok na to sir tnx...

[Drac]

Sir saan niyo po pinagawa yung routing para mag kasya yung Gotoh??

[rowley75]

Bagay nga yang Gotoh sa RG1570,  Gotoh din kasi nag manufacture ng Edge Pro, Lo Pro and the Original Edge..

Sir may locking studs ang Gotoh diba?? Nice!!! Very stable daw yan!!

Post ka pa ng picture niyang RG1570 mo ang ganda ng dating!!!


IMHO

Mas bagay sa mga RG ang Gotoh because of its similarity to the Orginal Edge!!

Parang RG570 Reissue ang dating!!!

I will ask Jon of Guitar one kung magkano over all kasama na routing work.... anyway almost any other replacement will need routing work kahit Lo Pro or original Edge..

I know mas maganda ang Gotoh because of the locking studs and I think the sustain block is better..

But I am such a Ibanez fan boy I want to replace mine with the same Edge pro but since its discontinued I might look for a Gloss Black Edge or Lo pro..

I don't like the esthetics of the cosmo black hardware on a black guitar body I prefer true gloss black..  And it seems mas mabilis mag corrode and tarnish ang Cosmo black saakin
pasmado kasi ako kahit anung Punas at wala after 3 years.. Ganito na!!


Pero yung mga pipitsugin na single locking Floyd type ko sa RG220 ko kahit 15 years na mahigit hindi parin na babakbak kahit na napabayaan yung bridge... nalubog pa sa baha yun!!


Sobrang mapili ako sa gitara at napaka arte ko.....  hayz buhay talaga hirap makuntento..


I painted the Edge pro on my RG1570 yung base plate lang naman not so much for esthetics para lang wag kalawangin madungis kasi ako!!!! Hahahaha..



Siguro if ever na masira yung bridge nung saa akin Gotoh ipapalit ko mostlikely kasi mahirap mag hanap ng Lo pro and Original Edge.. Lalo na Edge pro!!!!

Ano oppinion ninyo sir sa Edge Zero yung mga nasa Prestige and what about Edge Zero 2 hindi ko pa nasusubukan yung mga yun but I don't the appearance!!!

Hayzz ang arte ko talaga....
hahaha

Swabe ang edge zero. Nuff said.

[Van*]

How hard is it to find a good condition 550 in PI? And what's the price range?

[spoonbender]

Sir saan niyo po pinagawa yung routing para mag kasya yung Gotoh??

Kay Mike Sison

Here's a good read about trems and cavities: http://forum.ibanez.com/yaf_postst83402_What-trem-goes-into-what-cavity---MUST-SEE.aspx

[Drac]

Kay Mike Sison

Here's a good read about trems and cavities: http://forum.ibanez.com/yaf_postst83402_What-trem-goes-into-what-cavity---MUST-SEE.aspx

Ah okay thanks..

I heard a lot of good reviews about Mike Sis.. so Might drop by at his shop one of this days as I am eyeing a Gotoh replacement for the Edge Pro as I heard the Gotoh is the best
Trem system there is..

1.Very stable
2.Knife Edges very durable.
3.has good sustain block
4.The Arm torque adjustment is the best in the industry.

I love the Edge and their variants like Lo Pro or Edge Pro.

But one thing that bugs is the Tremolo arm gets lose so fast that you have to fabricate your own solutions like Teflon tape Nail Polish or plastic bags to tighten it!

[shanghaiboris]

My JS1000WH (2003 Production Japan)

Specs:
Dimarzio PAF Pro
Dimarzio FRED
Maple JS Prestige Neck
Rosewood Fingerboard

[albinomonster]

Ah okay thanks..

I heard a lot of good reviews about Mike Sis.. so Might drop by at his shop one of this days as I am eyeing a Gotoh replacement for the Edge Pro as I heard the Gotoh is the best
Trem system there is..

1.Very stable
2.Knife Edges very durable.
3.has good sustain block
4.The Arm torque adjustment is the best in the industry.

I love the Edge and their variants like Lo Pro or Edge Pro.

But one thing that bugs is the Tremolo arm gets lose so fast that you have to fabricate your own solutions like Teflon tape Nail Polish or plastic bags to tighten it!

So, for the Original Edge, what is the best DIY solution for the trem arm being loose? Best meaning long lasting.