DIY boutique amps, pedals, mod kits, proto-type circuits, etc - Post them here!

[kawayan_strat]

@Jim,ok lang bro,bihira na gumawa ng pedals,pa isa-isa nalang,busy sa mga kids.hehehe sigetuloy na tomaan/eb/diy pedal party! Dala ako isang pedal.hehehe

[pie-key]

Nice and simple clean boost (fetzer valve).  Aldouscross/pie-key inspired enclosure and footswitch!!  


Ganyan din iniisip ko.  Kaso laging may natitirang parts, na may konting kulang lang, pwede nang (insert new build)... 

wow... talagang inspired.... bro san mo nabili yung mini foot knob mo? aluminum? thanx... it looks very nice



halos kamukha na hehehehe kulit.....

[pie-key]

tinamad uli ako.. kulang mga spare ko.. BB preamp on hold.

let me help you with that bro... anu bang parts need mo...? if i have ill try to give you na lang..... sayang eh....

[quaternotetriplet]

let me help you with that bro... anu bang parts need mo...? if i have ill try to give you na lang..... sayang eh....

thanks bro.. kakarnehin ko na lang ung ibang build ko na nakatamabak.. Isang resistor at capacitor lang naman.

[mbsunga]

i want to share my "mugen" pedalboard

skreddy screwdriver -> dyna red distortion -> zendrive -> timmy

saludo ako sa mga DIYers ang gagaling nyo po!

[cayle]

^^ saludo ka kay mugen. hehe. Nice pedals! I miss my eternity clone.

[mbsunga]

^^ saludo ka kay mugen. hehe. Nice pedals! I miss my eternity clone.

sobra, paborito ko sa 4 na pedals nya yung dyna red
sobrang dynamic tpos ang linis mag clean up
may onte pang compression/sustain panalo talaga

[siore]

wow... talagang inspired.... bro san mo nabili yung mini foot knob mo? aluminum? thanx... it looks very nice

Same ones you use bro.  Pinutol ko lang yung haba, for structural and aesthetic reasons.    

[Musikerochan]

siguro i can live with that.

familiar ka ba sa slow gear ni gaussmarkov, yung "gator clone", any insights?

di ko pa nata-try buoin yung Gator, pero sabi mas versatile daw yun. pag nakachamba ako ng mga parts baka magbuo ako para meron din ako.

[Musikerochan]

wow octave pedals....okay.

You guys heard of the Mutron Octave Divider?

heard about it. i think one time i read sa DIYSB na masyado daw tricky. yung Shocktave is another octave pedal din. pero somehow one forumite there said the simpler, DA BETTER daw. he later settled for a Green ringer

for clean octaves i think nothing beats digital processors. analog octave circuitry tend to sound dissonant pag nagkacancel-out na yung mga frequencies.

[paparoni]

heard about it. i think one time i read sa DIYSB na masyado daw tricky. yung Shocktave is another octave pedal din. pero somehow one forumite there said the simpler, DA BETTER daw. he later settled for a Green ringer

for clean octaves i think nothing beats digital processors. analog octave circuitry tend to sound dissonant pag nagkacancel-out na yung mga frequencies.

tol na-try mo na ba yung green ringer?

[Musikerochan]

hindi pa, pero mas versatile for me yung PM/PY kasi may controls yun eh. yung green ringer ata eh fixed na yung controls.

[pie-key]

lapit na 200th page....... wahhhhhh post post mga kapatid

[Increbibly_VIC]

Mga brad, musta kayo? noob here... post lang ako... kasi first time ko bumanat ng DIY pedal kakatapos ko lang kanina,
hehe pangit ang aesthetic pero gumagana naman....

Orange squeezer clone... kita ko mga specs sa net tapos ginaya ko... wla din ako makitang mura na enclosure kaya
lalagyan ng paminta yun ginamit ko...

[Increbibly_VIC]

have you tried these? im using this as a counter part for the very pricey footswitch....

like this.....



its a DPDT bro so true bypass is possible... with LED is also possible..... try googling "DPDT true bypass switching with LED"..... or somewhat like that...... schematic ok.... good luck.....     

if youre lucky to find a JRC2904 woah! kaso generic yan bro... pero it will work well ok..... dont be too confused....

HAPPY DIYing....

Brad ano sabihin pag bumnili ng ganitong switch? Ano tawag dito? ... nasa davao kasi ako brad medyo limited resources dito e... hirap din maghananp ng parts lalo na pag hindi mo alam ang tawag... tnx... more power...

[pie-key]

Brad ano sabihin pag bumnili ng ganitong switch? Ano tawag dito? ... nasa davao kasi ako brad medyo limited resources dito e... hirap din maghananp ng parts lalo na pag hindi mo alam ang tawag... tnx... more power...

bro.... first of all.... what a very exotic nice build you got there.... hahahahaha... ++++1 sa looks pa lang....

sa karamihan ng shop na electronics na alam ko... naka label dito palagi is "SHS-6" sa deeco madami nito kaso hindi ganyan exactly... yung pinagkuhanan ko kasi taiwan made yung product... kung sa deeco china kulay itim ata siya.... basta ganun..... ang kelangan mo lang linis na maayos sa loob ng pannels..... i use an eraser (pambura ng lapis) para tanggalin yung rust at dirt sa terminals niya sa loob..... DPDT siya... so millenium bypass ang karaniwan na gamit nito..... next thing is cilhan mo ng aluminum caps na available din sa deeco... for 20php.... dati kasi i sell products like this kaya lang paba iba ng price sa market kaya pulled out... sayang..... sige bro good luck and continue building ok..... more power din

[Increbibly_VIC]

Hehe daghang salamat (maraming salamat) sa comment and advice brad...
i'll try to check it sa mga electronics shop dito...
post lang din ako ng mga tanong sayo kung oks lang... more power uli...

[pie-key]

Hehe daghang salamat (maraming salamat) sa comment and advice brad...
i'll try to check it sa mga electronics shop dito...
post lang din ako ng mga tanong sayo kung oks lang... more power uli...

no worries bro.... im open for a conversation as long as im on-line at magpang abot tayo dito na naka online..... i will answer naman when im online agad..... basta keep to mind that SHS-6 is a bit different switch compared to the usual foot switch.... "its an alternative only ok"..... but for me it works very fine....

here's my new ALL DIY pedal board set up..... with minor loop switching modification on my TS clone....




GUITAR>>MAGNUS MODULUS delay>>TS808/9clone modded[loop+TIMMY overdrive clone and/or fulltone> >>OCDv4modded clone]>>CRUNCH BOX V2>>Boss CE2 chorus clone modded>>REBOTE DELAY modded>>
>>TRMULUS LUNE>>Zvex SUPER DUPER 2in1 booster>>AMP(out)

powered by DC BRICKclone modded


here's my TS with looper mod..... on top is my flltone OCDv4 clone.... looped on my TS...


my new FULLTONE OCD v4.... with feedback capacitor mod(adds some grit)


attach ko na din.... sir KID eto yung sabi ko sayo oh.... DIY din.... tinapyas ko lang yung mahabang wire para gawing chain.... so parang meron na kong isang buo.... uniform din....

ewan ko lang kung meron sa deeco....

happy DIYing....

[ikem]

Mga brad, musta kayo? noob here... post lang ako... kasi first time ko bumanat ng DIY pedal kakatapos ko lang kanina,
hehe pangit ang aesthetic pero gumagana naman....

Orange squeezer clone... kita ko mga specs sa net tapos ginaya ko... wla din ako makitang mura na enclosure kaya
lalagyan ng paminta yun ginamit ko...

Nice one bro! Lagyan mo na rin ng footswitch

[ikem]

Brad ano sabihin pag bumnili ng ganitong switch? Ano tawag dito? ... nasa davao kasi ako brad medyo limited resources dito e... hirap din maghananp ng parts lalo na pag hindi mo alam ang tawag... tnx... more power...

^ problema lang nito hindi design for foot switching. Pag napasarap tugtugan nakalimutan na hindi sya footswitch..wasak. Ganito rin ung nilagay ka sa kin. Nung may nanghiram nasira.

[pie-key]

bro he's just being experimental.... (DIY purpses)..... its only an alternative.... but when time comes that he has gas... i think he will switch it to hard type.....

[jmwreck]

hello everyone, im from cebu, I want to know who among you have transistors like BC182 germanium NPN ata to or BC108 or BC109, or other germanium transistors and this JFET 2SK30A? Bibili sana ako nito, but not here in Cebu, so hopefully you guys have these.   

[jmorrero]

OT: wala pa bang update sa EB ng mga DIYers?

[pie-key]

hello everyone, im from cebu, I want to know who among you have transistors like BC182 germanium NPN ata to or BC108 or BC109, or other germanium transistors and this JFET 2SK30A? Bibili sana ako nito, but not here in Cebu, so hopefully you guys have these.   

hmm... not sure... i think has BC109 and 108.... i happen to look for those kelan lang..... very cheap...

PACKAGE is a plastic t092.... just like your typical plastic type tranies....

i dont really know about 2SK30A and BC182......

hope i helped idol....

[chadrhix]

sorry baka OT 

guys need your expert advice re sa DIY iRig cable..cant afford ko ang irig cable kaya DIY
baka sakali may makatulong : )

from my research iRig implemented an impedance correction circuit unlike the PRS na parang guitar-iphone cable lang kaya mas maganda yun sound

below is a simple guide on how to construct the cable na nahanap ko sa net
http://www.instructables.com/id/Make-a-cable-to-use-your-iPhone-or-iPod-Touch-as-a/

now the problem is how to match the impedance of the the guitar and the iphone audio input.. possible kaya ang DIY circuit? may workaround ba?

iphone tech sheet fomr the net
Headphones
Stereo earphones with built-in microphone
Frequency response: 20Hz to 20,000Hz
Impedance: 32 ohms

TIA