Ibanez guitar users thread

[IPGTR]

Regarding the RG1451, hindi ko masyadong trip ang looks niya. Reminds me of a Gio sa totoo lang.
IMO lang, mas maganda yung RG1421F:

sa unang tingin muka nga siyang GRG150 na iba lang ang bridge at knobs. hehe

[Red_Strat]

Ayun. GRG150 nga. 

would that tropa be aya13?

hmmm nice, i'll take that into consideration thanks

hirap maghanap ng fix bridged prestige rg's hehe, anyway san pa pwede makakita ng ibanez guitars? alam ko lang kasi sa audiophile moa.

Yes, si aya13 nga.  Audiophile main.. nasa Robinsons Otis na as far as I know. Don't look anywhere else, sila naman yung distributor dito eh. Hehe.

[pualux]

sa unang tingin muka nga siyang GRG150 na iba lang ang bridge at knobs. hehe

yeah, i searched the gio models, very similar sila. except for the bridge and the knobs, parang twins sila.

[IPGTR]

^


diba iba lang yung bridge at knobs sa unang tingin, at syempre yung sulat sa headstock hehe

nga pala gitara ko yan, Gio lang muna nagaaral pa eh, kaya excited nako maka graduate  

[cayle]

Thanks! Binili ko sa tropa ko for less than 30k.

Regarding the RG1451, hindi ko masyadong trip ang looks niya. Reminds me of a Gio sa totoo lang.
IMO lang, mas maganda yung RG1421F:

New release palang ito. Wala pa ata sa Audiophile. I went to AP festival mall. I was sad kasi wala nang mga acoustic guitars. They had lots of RGAs, S, RGD, and the RG350s that had maple boards. I only liked the RGD silverburst and the black RG350 with maple board.

[harvy]

here are my demon babes. 

[Chizdawg]

may katanungan sa isip ko   

bakit ba mas trip ng mga PRO or ng mga veterano na sa ibanez guitar ang mga edge, lo pro edge, edge pro compare sa mga ZR trem??

before gamit ko ZR (2003) madaling i-tono, stays in tune kahit maputulan ng isang string, pwede akong magdrop D sa 6th string nang hindi affected ang ibang strings or kailanganin pang luwagan ang nut clamp.

Ngayon gamit ko Edge pro, mahirap itono, pag nagdrop ka kailangan luwagan ang nut clamp at i-itono mo ulit ang ibang strings mo, which is matagal ulit

pero ang mga high end ibanez guitars na PGM, JEM at JS mga naka knife edge type na bridge

newbie lang po sa Ibanez 

its because mahirap mag flutter sa zr trem compared to edge trems or lo pro series.medyo stiff sa zr mag flutter.

[Kunanskie]

Here we talk, discuss, share pics, share tips about this awesome brand of guitars.
 

sali ako Artcore & Rx series

[Xelly]

^
^
^
Muzta sa paggamit ng Artcore sir? Hindi ba kayo nahihirapan bumabagsak yung neck?

[fraudulentzodiac]

Btw, the SV5470F Prestige is PURE GAS!

I was extremely GAS-ing for this before din! Mukhang panalo talaga and very versatile.

kaya lang may nakuha na ko na Ibanez which I really like, hassle nga lang kasi naka-Edge, di ako marunong gumamit ng FR haha.

[Red_Strat]

Mukhang hindi lang pala ako ang strat user na nag-switch to Ibanez lately. 
fraudulentzodiac, what model did you get?

[fraudulentzodiac]

Mukhang hindi lang pala ako ang strat user na nag-switch to Ibanez lately. 
fraudulentzodiac, what model did you get?

it was not intentional actually haha. pero I wanted to try out an Ibanez ever since, wala lang akong mahanap na ok.

all stock '90 JS1BK, exactly the same as the JS1000 nowadays, except the JS1 has a different neck profile and has a high-pass filter and it doesn't have the "JS Series" inlay on the headstock and the "Joe Satriani" inlay on the FB.


ever since I got it last week, inalikabok na yung hardcase ng Am Dlx strat ko.

[Red_Strat]

Pics or it didn't happen. 

[firewaterjem]

its because mahirap mag flutter sa zr trem compared to edge trems or lo pro series.medyo stiff sa zr mag flutter.

ooooooooooh...

i don't like my lo pro edge not to flutter...

i love using that effect   

[lyrad24]

uhh, Sa mga reviews or mga nabasa ko, kung gusto ata nila maganda pang flutter yung ZR trem, tanggalin na lang yung isang spring, yun full na floating lang siya Hindi pa ko S user pero ito rin yung target na gitara ko before at nauwi sa fixed bridge na ibby, Nagtataka lang din ako bakit si Herman Li, pinapalitan yung tremolo ng guitars niya (old S guitars and the E-gen) with the original edge.

Yun pala problems ko dun sa pups na LZ3 ng RGA32 ko, nawala na yung ayaw kong outer sounds pag intense ayy harder strumming, aha , hindi ko lam bakit pero gusto ko yung current sound niya! ehe Ayus na siya pang clean, 

[markvalones]

What can you say guys about RG2550MZ? need help thnx.

[fraudulentzodiac]

Pics or it didn't happen. 

I'm still too lazy to take more photos 

anyway, more info in here:
http://www.jemsite.com/articles-menu/js-guitar-specs-1-5-/
refer to JS1BK

[justine3563]

how about edge zero?ito yung nasa prestige models din ngayon..it kas knife edge din but it has a zero point system..

any reviews?

[region III]

Dudes, I will buy a new ibby next week but I havn't made up my mind yet which model to get.

Here are my choices:

RGA420Z PRT

RG3550MZGK

RG3570ZLB

S5470F RVK

Lahat ng RG naka edge zero, ung S lang a ng ZR.

What do you think?

[bryanarzaga]

how about edge zero?ito yung nasa prestige models din ngayon..it kas knife edge din but it has a zero point system..

any reviews?

i tested it its good, but its not for me..

with this spring tension setup, i dont think i will get used to it, its too balanced on spring tension, i just firmly believed that there should be more tension on the lower gauge side,

Dudes, I will buy a new ibby next week but I havn't made up my mind yet which model to get.

Here are my choices:

RGA420Z PRT

RG3550MZGK

RG3570ZLB

S5470F RVK

Lahat ng RG naka edge zero, ung S lang a ng ZR.

What do you think?

try em out region, i still want 2 pivots and 3 tension springs..

[bryanarzaga]

GG type wiring(no blower switch use a toggle for that)

[region III]

i tested it its good, but its not for me..

with this spring tension setup, i dont think i will get used to it, its too balanced on spring tension, i just firmly believed that there should be more tension on the lower gauge side,




try em out region, i still want 2 pivots and 3 tension springs..

i seem to like the feel of the RGA420Z PRT but i don't like the edge zero and it's H H.

are all the RG prestige series using the edge zero?

[bryanarzaga]

i seem to like the feel of the RGA420Z PRT but i don't like the edge zero and it's H H.
are all the RG prestige series using the edge zero?

same here not the biggest fan with the edge zero, i know they're doing that to not pay FR licensing..but i prefer the edge, loproedge, or edge pro,

not every prestige is edge zero, 1420 is still edge pro

[region III]

^ thanks Bry, i'll try to look for a 770 reissue. have you seen one of these anywhere?

[bryanarzaga]

^ thanks Bry, i'll try to look for a 770 reissue. have you seen one of these anywhere?

GuitarCenter is the slowest to stock these, last time i checkd alphamusic already has them 1420F models, for the 770 reissue i tried em, but im more into their rosewood fretboards when it comes to prestige / j.custom ibanez's

but its good that they do a direct mount pickup routing that can accept SD's or EMGS' other than dimarzios'