Author Topic: CGI Electronics CUSTOM BOUTIQUE PEDALS (Read 163790 times)

christer · « **Reply #100 on:** October 11, 2007, 02:36:15 AM »

Good suggestion sir, but i will not accept that job. That certain pedal he owns has a large large bit of OPM history in it. I will not desecrate that pedal.

ubersam · « **Reply #101 on:** October 11, 2007, 03:46:37 AM »

Quote from: christer on October 11, 2007, 02:36:15 AM

Good suggestion sir, but i will not accept that job. That certain pedal he owns has a large large bit of OPM history in it. I will not desecrate that pedal.

OPM? Original Pinoy Music? Medyo matagal na akong wala sa 'Pinas, so 'sensya na kung mali. Anyway, in that case, gawa na lang nang customized na TS, with Orange drops in all the right places!

hardcore misery · « **Reply #102 on:** October 11, 2007, 06:37:18 AM »

Quote from: christer on October 11, 2007, 02:19:46 AM

Good question sir!

This is how it goes. First, once i finish the pedal, i actually test it for a number of minutes or even hours. I also fine tune the pedal if they have trimmer potentiometers. Second, i can call the customer if he wishes to, so that he could actually hear it being switched on and off. Of course tone would not be in question here because we cant hear the pedal clearly over the fone. Lastly, minutes before i actually mail the pedal, i do check it again for a number of times to ensure that it is fully funcional as it leaves my home.

When it comes to shipping and handling, i mail my pedals in a cardboard box. Inside, the pedal is protected with wax paper, and a big fat wad of bubble wrap.

Peace din po sir!

ayus! at least my guarantee yung customer na talagang working yung pedal bago niya matanggap yun . thanks!

christer · « **Reply #103 on:** October 11, 2007, 08:52:22 AM »

Quote from: ubersam on October 11, 2007, 03:46:37 AM

OPM? Original Pinoy Music? Medyo matagal na akong wala sa 'Pinas, so 'sensya na kung mali. Anyway, in that case, gawa na lang nang customized na TS, with Orange drops in all the right places!

Yup Orig. Pinoy Music. Mga ilang yeats na po ba sir?

Anyway, a customized TS with Orange Drops is something i would love to do.

ginblue · « **Reply #104 on:** October 11, 2007, 09:06:25 AM »

sir,

how much yung BK Butler tube works clone? kaya ba?

ubersam · « **Reply #105 on:** October 11, 2007, 09:12:06 AM »

Quote from: christer on October 11, 2007, 08:52:22 AM

Yup Orig. Pinoy Music. Mga ilang yeats na po ba sir?

My dad moved the family to the US in '85.

Quote

Anyway, a customized TS with Orange Drops is something i would love to do.

Ako din, pero ilalagay ko lang yung Orange Drops sa signal path (input cap, coupling cap).

christer · « **Reply #106 on:** October 11, 2007, 12:09:55 PM »

Woah, 22 years na pala ah.

yup ganun nga po, sayang lang yung mga orange drops kung ilalagay mo lang pang shunt

paengkee · « **Reply #107 on:** October 11, 2007, 01:28:55 PM »

"a big fat wad of bubble wrap."

i love this. best part of the packaging. huge bubbles! *pop* *pop*

ginblue · « **Reply #108 on:** October 11, 2007, 02:40:27 PM »

Quote from: ginblue on October 11, 2007, 09:06:25 AM

sir,

how much yung BK Butler tube works clone? kaya ba?

up for my question

BlackDiamond · « **Reply #109 on:** October 11, 2007, 04:06:19 PM »

Sir hindi ka reply sa PM ko kung possible na lagyan ng additional knob for the mids and additional footswitch for mid/level boost ung GT-2 clone?

How much kung possible? If not what are the additional upgrades possible for the GT-2 clone?

Thanks!

ginblue · « **Reply #110 on:** October 11, 2007, 04:54:26 PM »

Quote from: BlackDiamond on October 11, 2007, 04:06:19 PM

Sir hindi ka reply sa PM ko kung possible na lagyan ng additional knob for the mids and additional footswitch for mid/level boost ung GT-2 clone?

How much kung possible? If not what are the additional upgrades possible for the GT-2 clone?

Thanks!

tinanong ko narin yan sir, sa previous page ng thread na to

malabo mangyari yan hehehe

christer · « **Reply #111 on:** October 11, 2007, 08:20:39 PM »

Quote from: ginblue on October 11, 2007, 02:40:27 PM

up for my question

Sir, i dont think i can do that proj sir. sorry

ginblue · « **Reply #112 on:** October 11, 2007, 10:18:30 PM »

Quote from: christer on October 11, 2007, 08:20:39 PM

Sir, i dont think i can do that proj sir. sorry

no problem

up narin

demoboi · « **Reply #113 on:** October 11, 2007, 11:13:39 PM »

sir, ok na ba ung 5 knobed BSIAB2?

im saving....

christer · « **Reply #114 on:** October 12, 2007, 12:41:08 AM »

Quote from: demoboi on October 11, 2007, 11:13:39 PM

sir, ok na ba ung 5 knobed BSIAB2? im saving....

Sir, wala pa po, medyo busy pa, keep you all posted lang.

christer · « **Reply #115 on:** October 12, 2007, 11:25:39 AM »

I cant find the damn dvd where i stored my previous works. Anyhow, this is one of my more recent work.

PEPEMAN's TREMOLOVE Tremolo:

christer · « **Reply #116 on:** October 12, 2007, 11:36:57 AM »

PEPEMAN's Distortion (BSIAB2) Still in the final stages of painting

juntwang · « **Reply #117 on:** October 12, 2007, 11:58:27 AM »

wow! very nice job!

ibysdad · « **Reply #118 on:** October 12, 2007, 12:59:31 PM »

nakaka suspense yan a!

trewzd · « **Reply #119 on:** October 12, 2007, 01:26:41 PM »

Quote from: christer on October 12, 2007, 11:25:39 AM

I cant find the damn dvd where i stored my previous works. Anyhow, this is one of my more recent work.

PEPEMAN's TREMOLOVE Tremolo:

ano price range ng mga pedals nyu sir??

paengkee · « **Reply #120 on:** October 12, 2007, 02:17:00 PM »

^^^ to quote from christer noon:

"higher than a boston but lower than a boss"

christer · « **Reply #121 on:** October 12, 2007, 10:28:24 PM »

Yun yung tamang range! Hahah, thats right, Higher than Boston, Lower than Boss pero what do you get?

-True Bypass Switching
-High Quality Pots, Knobs, LED Bezel
-Sturdy Cast Aluminum Chasis
-High Intensity LED's
and the best part of all... Customization options for circuitry parts and Paint job

pepeman · « **Reply #122 on:** October 13, 2007, 12:55:49 AM »

wow! ngayon ko palang nakita yung mga pedal! ganda sir! sakto sa binigay kong concept! good job! gusto ko na gamitin!!! hahahahah!

christer · « **Reply #123 on:** October 13, 2007, 12:50:18 PM »

Hahaha. Inulit ko yung tremolo eh, Hindi ko talaga kinayanan, OC kasi. Inulit ko buo kasi medyo tabingi yung label. Nyehehe. IMO mas maganda ngayon.

karlvalerio · « **Reply #124 on:** October 13, 2007, 01:35:40 PM »

sir magkanu po un ts-808 clone?
PM nyo po ako....tnx po
what area po kau?

News:

Author Topic: CGI Electronics CUSTOM BOUTIQUE PEDALS (Read 163790 times)

ginblue

ginblue

ginblue

ginblue