Boss GT10 users thread

[usermarc]

GT10 Output Setup Alternative:
Guitar>GT10>amp

Mayroon ba sa ating nakasubok na gamitin ang "send" out ng GT10 straight to amp input or amp's fx return? Lately, nasubukan kong i-compare yung sound between the  conventional setup/connection using either the l/mono and right outputs on the GT10 vs this method (bypassing the DGT block in the fx chain) utilizing "send" out as the main line out going to the amp.

In this method, the S/R block should be turned on and placed before the DGT block in the fx chain. The main output or volume knob on the GT10 will no longer work. I noticed a big difference in the fullness of the sound when the DGT block is bypassed.

You can either use the GT10 for effects only much like an ME50 or choose to engage the cosm preamps to put flavor on the tone. Either way, the S/R block should be after the last effect or preamp on your virtual signal chain.

I'm hoping to get some comments on any issues this setup may have and if the sound being fuller is just to my ears.

Salamat

[rogeryu]

Hi guys medyo busy lng...nad clash of clans na rin hahhahaa

Sure usermarc you could use it that way. Use the send level naman for more send output volume 
But remember S/R is mono, here my tip if your band use direct to mixer use the left and right GT10 output PLC connect it to Stereo Sonic stomp with XLR left and XLR right output and plug direct both XLR to mixing house. para maging Stereo output ka.....ask for the club or mixing desk sound tech to give you 2 monitors for left and right for your monitoring at stage ( you don't need to bring your own Amp, Guitar, GT10 and stereo Sonic stomp yon lng) ...

Hope i did help..
Cheers to all GT10 users,
Roger

[accento24]

Hi sir roger! Musta na? Pm sent.

[rogeryu]

Hi Comrade 
 So far better naman ....kindly check your inbox 

[paolo_axentro]

buhayin ko lang. nasira yung parameter knob #1 ng unit ko. ayaw maikot. di kaya ng contact cleaner. baka may tips kayo jan. salamat.

[Gerrit]

buhayin ko lang. nasira yung parameter knob #1 ng unit ko. ayaw maikot. di kaya ng contact cleaner. baka may tips kayo jan. salamat.

Ano yun brod basta nag stuck up na lang? E continous pa naman yun.  Anyway, kung sa akin ok lang yun kasi useless din naman sa akin. Naka 50 lang sila lahat escept lang sa patch level.

[paolo_axentro]

Ano yun brod basta nag stuck up na lang? E continous pa naman yun.  Anyway, kung sa akin ok lang yun kasi useless din naman sa akin. Naka 50 lang sila lahat escept lang sa patch level.

nung una ok naman ikutin kaso di gumagana ng maayos kaya nilinis ko ng contact cleaner, tapos nung inikot ikot ko ayun nag stock na. linisin ko siguro ulit baka may dust o buhangin. pero palyado na talaga yung pot.

problema lang naman pag mag gagawa ng bagong patch, #1 yung pang select halimbawa od/ds or preamp, #1 yung pang pili ng mga tunog. pati ctr1 nasa #1 param din yung selector.

[Gerrit]

nung una ok naman ikutin kaso di gumagana ng maayos kaya nilinis ko ng contact cleaner, tapos nung inikot ikot ko ayun nag stock na. linisin ko siguro ulit baka may dust o buhangin. pero palyado na talaga yung pot.

problema lang naman pag mag gagawa ng bagong patch, #1 yung pang select halimbawa od/ds or preamp, #1 yung pang pili ng mga tunog. pati ctr1 nasa #1 param din yung selector.

Pwede mong gawin lahat yan sa carousel. Nandun lahat yun bro.

[paolo_axentro]

Pwede mong gawin lahat yan sa carousel. Nandun lahat yun bro.

tinry ko ayaw mapalitan o makaselect pag yung big wheel ang gamit. baka may hindi ako nagawa, pahingi naman tips. kahit sa pag select lang ng preamp or od/ds. yung quick setting lang ang ginagamit ko pang select. baka meron pwede mag try at makapag turo hehehe. salamat.

[Gerrit]

tinry ko ayaw mapalitan o makaselect pag yung big wheel ang gamit. baka may hindi ako nagawa, pahingi naman tips. kahit sa pag select lang ng preamp or od/ds. yung quick setting lang ang ginagamit ko pang select. baka meron pwede mag try at makapag turo hehehe. salamat.

Kung nasa edit mode ka, kailangan mong gamitin yung cursor up or down para mahighlight ang ieedit mo.  Kapag naka highlight na, pihitin mo na yung carousel dapat magbabago yun. Try mo

[vantonilin]

Try mo rin ito... pag pasok mo sa edit mode, make sure na yung display mo hindi naka knob setup. Press display button para mag cycle ka sa mga display modes. Choose the display na kaya ma-control ng carousel. Good luck 

[Gerrit]

Try mo rin ito... pag pasok mo sa edit mode, make sure na yung display mo hindi naka knob setup. Press display button para mag cycle ka sa mga display modes. Choose the display na kaya ma-control ng carousel. Good luck 

Ah oo tama ito. Change mo pala muna ang display view mo at the same time lahat ng parameters makikita mo na hindi katulad sa display mo at presnet.

[vantonilin]

Mga chief, I connect my GT10 to my amp via the 4 cable method. When I bypass the GT10, lumalakas output ng Amp. Parang nilakasan na volume na clean tone and lumalabas sa amp. When I tried mapping the signal path parang ang lumalabas when I turn on the bypass sa GT10 parang naka direct and guitar ko sa Return ng amp. My questions are:

1. Okay lang kaya sa amp yun?
2. How do I get a lower level output volume sa amp when switching GT10's bypass/tuner on?

[raisethecoup]

Sorry if medyo off topic, but can anyone here help and point me to where and to whom I can acquire a Digital Enhancer Cleaner pedal? I read from a few threads that sir rogeryu (the creator of the DEC pedal) has stopped working on it. However, I also read that sir BAMF was supposed to have continued the project. May balita ba about that? Gusto ko lang sana isama sa rig ko along with my Boss GT10. Salamat po mga sir!

[24242009]

mga sir saan ba maganda bumili ng gig bag para sa boss gt10?

[raisethecoup]

mga sir saan ba maganda bumili ng gig bag para sa boss gt10?

You can consider looking for one here if someone's selling. If not, you can check this link out. May section diyan for custom gig bags/pedalboards.

http://talk.philmusic.com/index.php?topic=294599.msg4044649#msg4044649

[24242009]

You can consider looking for one here if someone's selling. If not, you can check this link out. May section diyan for custom gig bags/pedalboards.

http://talk.philmusic.com/index.php?topic=294599.msg4044649#msg4044649

maraming salamat sir sa info, late ko na nabasa to galling din ako sa perfect pitch and nagtatahi din sila ng gigbag for boss gt10, nakita ko yung materials, pero baka mas maganda yung mga nasa directory check ko sila. thank you again for the info

ngayon ko lang nagagamit yung boss gt 10 ko, may boss gt100 na pala, hindi ko pa master ang gt10

[raisethecoup]

maraming salamat sir sa info, late ko na nabasa to galling din ako sa perfect pitch and nagtatahi din sila ng gigbag for boss gt10, nakita ko yung materials, pero baka mas maganda yung mga nasa directory check ko sila. thank you again for the info

ngayon ko lang nagagamit yung boss gt 10 ko, may boss gt100 na pala, hindi ko pa master ang gt10

No problem, sir! 

[accento24]

Lenar gigbags...quality but not pricey 

[24242009]

mga sir ayaw gumana ng expression pedal ko sa boss gt10. diba aapakan lang yun ng madiin para maactivate? sakin ayaw gumana sir

[Gerrit]

mga sir ayaw gumana ng expression pedal ko sa boss gt10. diba aapakan lang yun ng madiin para maactivate? sakin ayaw gumana sir

Didiinan mo ang apak sa bandang toe hindi yung buong pedal

[24242009]

Didiinan mo ang apak sa bandang toe hindi yung buong pedal

sobrang diin ko na sir ayaw padin, 6 years ko kasing hindi nagamit tong boss gt10 ko

[fender101]

sobrang diin ko na sir ayaw padin, 6 years ko kasing hindi nagamit tong boss gt10 ko

nako baka may amag na yung loob ng pots nyan sir

[24242009]

mga sir pwede niyo ba ako tulungan para sa accurate patches para sa mga kanta ng bandang the smits: This charming man, and heaven knows im miserable, thanks

[arcangelmorris]

Sorry if medyo off topic, but can anyone here help and point me to where and to whom I can acquire a Digital Enhancer Cleaner pedal? I read from a few threads that sir rogeryu (the creator of the DEC pedal) has stopped working on it. However, I also read that sir BAMF was supposed to have continued the project. May balita ba about that? Gusto ko lang sana isama sa rig ko along with my Boss GT10. Salamat po mga sir!

Sir full na inbox mo. Got something for you
Sorry mod medyo off topic