Author Topic: 9V 350mAh to be use in a 9V 800mAh Adaptor. ok lang po ba? (Read 3745 times)

redjaztin · « **on:** February 24, 2009, 04:06:27 PM »

Meron po akong nabiling Ibanez TS-7...wala po akong adaptor na 9V 800mAh. Ok lang po ba na gamitin ko yung sa generic adaptor ko na 9V 350mAh?

Sinubukan ko pong isaksak. Gumana naman. Ano po kayang magiging problema ko pag ginamit ko ito pang matagalan? E kung bumili po ako ng 500mAh. ok alng din po ba?

Thanks sa makakatulong!

domengshu · « **Reply #1 on:** February 24, 2009, 04:25:03 PM »

800mAh ba current draw ng TS-7?

ang taas naman.

Parang naka 2 Zoom multi-fx ka na nun.

Anyway, my basic understanding of electronics tells me that the adaptor wouldn't be able to power your pedal in the first place if the adaptor's output is far less than the current draw of your pedal.

Hula ko around 350-400mAh yun actual draw ng pedal.

Electronics experts can correct me if I'm wrong. Amateur guess lang ito. haha. (lol)

lonestar · « **Reply #2 on:** February 24, 2009, 07:16:47 PM »

Quote from: redjaztin on February 24, 2009, 04:06:27 PM

Meron po akong nabiling Ibanez TS-7...wala po akong adaptor na 9V 800mAh. Ok lang po ba na gamitin ko yung sa generic adaptor ko na 9V 350mAh?

Sinubukan ko pong isaksak. Gumana naman. Ano po kayang magiging problema ko pag ginamit ko ito pang matagalan? E kung bumili po ako ng 500mAh. ok alng din po ba?

Thanks sa makakatulong!

Ok lang yan bro. Wala pang 100 mA ang power consumption ng individual '9V battery powered' pedal. Kayang-kaya nga i-power ng 9V battery so okay lang yan. You can verify the actual power consumption sa 'label' ng pedal or sa manual.

Pwede ka pa actually mag-power ng iba pang pedal using the same adapter (if you have the proper power cable, like Boss's), just make sure na yung total power consumption of those pedals is still under 350 mA.

Hope this helps.

child309 · « **Reply #3 on:** February 24, 2009, 08:09:48 PM »

I suggest wag ka gagamet ng mas mababa sa nakalagay sa 'label' ng pedal. It will work pero hindi mailalabas ng pedal mo yung 100% performance nya. Example icompare mo dalawang flash light na may bagong battery at luma. Mas malakas ilaw nung bago. Pag nag compare ka sa pedals mapapansin mo na may 'hum' ang tunog kapag mas mababa ang current rating. Pero minsan negligible kase mahina lalo kapag maliit lang ang difference sa current. Goodluck.

masterchoxter · « **Reply #4 on:** February 24, 2009, 08:14:21 PM »

i suggest getting a regulated psu or a custom psu... generic power adapters have a tendency to break pedals in the long run... ask your nearest friendly neighborhood pedal tech...

redjaztin · « **Reply #5 on:** February 25, 2009, 11:43:20 AM »

confused ako sa mga sagot a....hehehe...nagtataka nga ako e. Pero nasira na yung Battery power nya. Siguro dahil nga sa malakas kumunsumo ng power itong TS-7. Pero check ko sa manual recommended power adapter. mahirap na.

Thanks po sa nag-reply at magre-reply pa.

redjaztin · « **Reply #6 on:** February 25, 2009, 12:28:52 PM »

Eto po yung sabi sa manual

"When using an AC adapter, use only the IBANEZ AC109, AC309 or AC509 adapter to prevent damage."

IBANEZ AC109, AC309 or AC509 adapter is a 9V 200/300/500mAh. TS-7 is 9V 800mAh (MAX). Meaning pwede po pala talagang mas mababang mAh. Edi meaning pwedeng pwede po talaga yung 350mAh kong adaptor. Correct me if Iam wrong masters.

tapslore · « **Reply #7 on:** February 25, 2009, 01:23:13 PM »

warning: di ako electrician, nagmamarunong lang

imo, if your adapter has a lower mA rating than your pedal's current draw, the adapter will eventually melt down. the max mA rating means your TS-7 spikes every now and then to 800mA - yun yung sisira sa adapter mo in the long run, kasi di niya kayang ibigay yung ganun kalakas.

just to be safe, get an ac adapter that meets or exceeds the mA rating of the TS-7's recommended adapter, or better yet, magpagawa ka na lang ng psu.

2 cents, please correct me if i'm wrong, sirs.

edit: 800mA pala yung MAX nung recommended adapter, not the TS-7. that should be ok then, for now. but try to get a regulated psu para kampante ka, most generic adapters are unregulated...

Super BisDak · « **Reply #8 on:** February 25, 2009, 02:43:02 PM »

Quote from: redjaztin on February 25, 2009, 12:28:52 PM

Eto po yung sabi sa manual

"When using an AC adapter, use only the IBANEZ AC109, AC309 or AC509 adapter to prevent damage."

IBANEZ AC109, AC309 or AC509 adapter is a 9V 200/300/500mAh. TS-7 is 9V 800mAh (MAX). Meaning pwede po pala talagang mas mababang mAh. Edi meaning pwedeng pwede po talaga yung 350mAh kong adaptor. Correct me if Iam wrong masters.

yes, you can use your generic psu (350mA). i think TS-7 has just a current draw around 120mA.

arkeetar · « **Reply #9 on:** February 25, 2009, 06:51:06 PM »

get a Pedalmax!

tapslore · « **Reply #10 on:** February 25, 2009, 08:32:15 PM »

Quote from: arkeetar on February 25, 2009, 06:51:06 PM

get a Pedalmax!

mismo!

akosimic · « **Reply #11 on:** February 26, 2009, 01:07:38 AM »

a ts7 needs 9mA. do the math ([grape] ako sa math eh)

redjaztin · « **Reply #12 on:** February 26, 2009, 08:35:05 AM »

Quote from: arkeetar on February 25, 2009, 06:51:06 PM

get a Pedalmax!

ano po ang pedal max? saan nakakabili at magkano?

tapslore · « **Reply #13 on:** February 26, 2009, 12:25:53 PM »

Pedal-Max aka Emil Murillo is a well-known PSU maker. A lot of guitarists have had theirs done with him, specs pa nila.

Here's his website:
http://www.freewebs.com/pedal-max/

lord4dark · « **Reply #14 on:** February 27, 2009, 09:35:12 AM »

using a smaller mA will lead to the transformer of the power supply to heat up and vibrate, causing the audible "hum". I suggest you don't cut corners in powering your fx, since nasa power supply ang dugo ng inyong Fxs. Use only the recommended Psus, pagawa ka ng regulated PSU and stay away from the wallwarts na mabibili sa malls.

hardcore misery · « **Reply #15 on:** February 27, 2009, 09:03:33 PM »

kung ang current draw ng pedal mo ay 100mA (pero parang ang laki para sa isang analog dist pedal, yung MT-2 nga, 20mA lang eh) gagana pa rin yan sa 350mA PSU, yung audible 'hum' maririnig mo yan pag hindi regulated ang voltage ng PSU mo, pulsating kasi yung voltage na pumapasok sa pedal mo eh..

otihcisme · « **Reply #16 on:** February 27, 2009, 09:45:43 PM »

i will never use a generic power supply for my pedal... never on my entire human life!!!

-pramis

sikheadzraf · « **Reply #17 on:** February 28, 2009, 10:23:49 AM »

sigurado ka bang 800mah ang consumption?

kasi ito nakita ko sa site ng ibanez
TS-7 Specs
Power supply ............. 9V battery (S-006P) or AC109, AC309, AC509
Current Consumption .. 8mA
maximum Dimensions ................ 125(D) x 75(W) x (53H) Weight ........................ 440g (with battery)

so malamang... kayang kaya ng 350mah na adaptor... kaya nya siguro mag power ng 43 pcs na TS7 ^^

350mah divided by 8mah = 43.75

correct me if im wrong.

lestercanon · « **Reply #18 on:** February 28, 2009, 02:35:42 PM »

http://www.ibanez.com/electronics/model-TS7

"SPECS:
Power supply ............. 9V battery (S-006P) or AC109, AC309, AC509 Current Consumption .. 8mA maximum Dimensions ................ 125(D) x 75(W) x (53H) Weight ........................ 440g (with battery)"

Check mo yan sir.

Warning: Nagmamarunong lang din ako.
Sabi nung electrician na nakausap ko dati basta mas mataas yung "ma" nung adapter kaysa sa "ma" nung device, walang hum issues.
Yun lang. Hehehehe...

lovecore · « **Reply #19 on:** February 28, 2009, 07:31:35 PM »

I had the same problem before and my friends and some professionals I consulted said it's ok to have a higher mA than lower than what's recommended... of course exact voltage hehehe

paparoni · « **Reply #20 on:** February 28, 2009, 09:46:08 PM »

Quote from: redjaztin on February 25, 2009, 12:28:52 PM

Eto po yung sabi sa manual

"When using an AC adapter, use only the IBANEZ AC109, AC309 or AC509 adapter to prevent damage."

IBANEZ AC109, AC309 or AC509 adapter is a 9V 200/300/500mAh. TS-7 is 9V 800mAh (MAX). Meaning pwede po pala talagang mas mababang mAh. Edi meaning pwedeng pwede po talaga yung 350mAh kong adaptor. Correct me if Iam wrong masters.

okay hmm, it says AC adaptor, iba ang AC sa DC eh (hindi yung banda ha)

kung DC supply ang adaptor mo, i suggest have a 9v dc rating having the least minimum current na kailangan ng ipo-power mo.. mas maganda kung mas malaki ang current ng supply mo, pero kung mas mababa, pwede ATA masunog yung supply, dahil sa current draw ek-ek, well sabi ng prof namin sa electronics.. haha..

pero ang laki naman ata kung 800 mA ang kailangan sa ts7

News:

Author Topic: 9V 350mAh to be use in a 9V 800mAh Adaptor. ok lang po ba? (Read 3745 times)