ASSEMBLED GUITAR EFFECTS? ANYONE?

[mon116ph]

I think kaunti lang ang nakaka alam ng tindahan na ito sa RAON.

They have

OVERDRIVE
CHORUS
DIGITAL DELAY (ewan ko kung DIGITAL NGA)
OCTAVE
REVERB.

Galing daw ng TAIWAN..I remember this shop kasi during my HIgh School days noong time na di ako makabili ng EFFECT eh dto ako bumibili..

Eheheheheh

OVERDRIVE worth P 200.00 pero kayo ang mag assemble.

Tsaka yung CASING nya ay PLASTIC..

Meron ata SA DEECO.

Cno marunong mag assemble?

I use that sa isang GIG and its sounds decent naman.

CUSTOMIZE your OWN STOMPBOX (heheheheheheh)

May paper or instruction to assemble naman ito eh.

[kaloyster]

si BAMF gumagawa, ace pare.. f*ckin' ace.

[BAMF]

That can only be Alexan Commercial, right beside Deeco.

Marami-rami na rin nakaka-alam nyan and the projects they have .

Eto na lang, punta ka dito : www.tonepad.com pag di ka naglaway at nalunod sa dami ng FX projects, ewan ko lang hehehe

[kanshooter]

I used to assemble my own effects of course with Alexan kits...overdrive, compressor and phaser (may macguyver pa kasi na tv series noon)

--that was the time nung sa binondo pa lang ang alexan --- my early teenage days

ngayon andami ng alexan branches -- pati sa megamall meron na....

[woozah!]

what do you mean by assemble? you'll solder the parts urself? or is it already soldered together, casing na lang ang kulang? thanks.

[mon116ph]

Correct kaw lahat ang mag assemble,maghihinang at magkkabit sa mga boards nya.

[stringman]

Before may store sa may Malate nag assemble ako nang distortion it sounded like [gooey brown stuff]. Baka the IC boards are better now.

[Machine_Head]

I bought a tube overdrive at alexan. I had it assembled by an electrician, its still with him so i have no idea how it sounds.

Care to post reviews of your alexan peds?

[BAMF]

Before may store sa may Malate nag assemble ako nang distortion it sounded like [gooey brown stuff]. Baka the IC boards are better now.

Ahhh. You're talking about Integrated Opto Electronics Labs. They've changed their name to Tanioka Electronics Labs. They now reside somewhere in Paranaque. Their fuzz boards only cost P 35 apiece back in the early 90's, assembled na, you just supply the pots, switches and case. It was based on the Fuzzface.

Maybe my ears were not as matured as they are now (they hurt easily these days) but I found those to be relatively decent despite being cheaper than Alexan.

[BAMF]

I bought a tube overdrive at alexan. I had it assembled by an electrician, its still with him so i have no idea how it sounds.

Care to post reviews of your alexan peds?

My first and only "distortion" effect from Alexan was the Distortion pedal. I didnt like it. Anyway, the Tube Overdrive pedal, if I remember correctly, has its clip diodes across the feedback loop of the OP-AMP. It should approach the Tube Screamer sound. But don't take my word for it just yet, I'll look at the schematic if and when I drop by Alexan again.

[stringman]

Before may store sa may Malate nag assemble ako nang distortion it sounded like [gooey brown stuff]. Baka the IC boards are better now.

Ahhh. You're talking about Integrated Opto Electronics Labs. They've changed their name to Tanioka Electronics Labs. They now reside somewhere in Paranaque. Their fuzz boards only cost P 35 apiece back in the early 90's, assembled na, you just supply the pots, switches and case. It was based on the Fuzzface.

Maybe my ears were not as matured as they are now (they hurt easily these days) but I found those to be relatively decent despite being cheaper than Alexan.

Yup I think it's them.