hulika

Author Topic: Hardware Finishes thread  (Read 21433 times)

Offline marko21

  • Philmusicus Addictus
  • *****
Chrome hardware vs. Black Hardware
« Reply #25 on: September 15, 2006, 09:01:47 PM »
Quote from: peeves24
^^^ why not?



white hoops and lugs are powder coated :D
wow.. eh ung shell (shell nga ba yun?) ng drums?

Offline peeves24

  • Philmusicus Addictus
  • *****
Chrome hardware vs. Black Hardware
« Reply #26 on: September 15, 2006, 09:05:38 PM »
^^^ spray painted ng flourescent pink at white

black maya yung drums ko dati, b a d i n g na b a d i n g na sya ngayon!

Offline Akira JUMBO

  • good vibrations
  • Moderator
  • *****
Chrome hardware vs. Black Hardware
« Reply #27 on: October 11, 2006, 01:48:04 AM »
may naka punta na ba sa Republic Powdercoating sa Balintawak?  :oops:
DRUM.ROOM drum items for sale click here

Offline zound_tech

  • Senior Member
  • ***
Chrome hardware vs. Black Hardware
« Reply #28 on: October 11, 2006, 10:56:19 AM »
kailangan ba yan ipagawa o pwde ikaw na mismo gagawa?
puro kalawang na yung akin eh,
lilihahin ko pa?

Offline peeves24

  • Philmusicus Addictus
  • *****
Chrome hardware vs. Black Hardware
« Reply #29 on: October 11, 2006, 11:20:34 AM »
^^^ bago mo dalin dun, lihahin mo na yung kalawang. gawin mo smooth as possible kasi pag nasa kanila na yan, pupunasan lang nila tapos salang na agad sa oven.  magkakabubbles yung coat kung may kalawang yan


Offline jun_BALARAW

  • Philmusicus Addictus
  • *****
Chrome hardware vs. Black Hardware
« Reply #30 on: October 11, 2006, 11:27:11 AM »
san ba eksakto sa balintawak yang powder coating na yan? along edsa lang ba yan?? paki sabi naman para mapuntahan ko naman. thanks
PEACE.... PEACE.... PEACE.... PEACE....

Offline killuaxp

  • Senior Member
  • ***
san po ung nagpapowder coat?
« Reply #31 on: November 05, 2006, 03:11:26 AM »
mga tsong san ba ung nagpapowercoat ng snare?i saw a thread about it but cant find anymore. hihi! :-D tsaka ano ba diff ng powdercoat sa ordinary paint mga tsong? di ko kasi alam eh. ty! :-D

Offline drummerboy827

  • Forum Fanatic
  • ****
Re: san po ung nagpapowder coat?
« Reply #32 on: November 05, 2006, 02:04:14 PM »
I think its a special kind of paint or whatever. it is supposed to be rough.
"Fast practice = slow progress"
"Slow practice = fast progress"

Offline pmack

  • Philmusicus Addictus
  • *****
Re: san po ung nagpapowder coat?
« Reply #33 on: November 05, 2006, 02:20:49 PM »
wait mo lang si sir peeves.
siya ang idol ko sa mga ganyang bagay eh.
:D

Offline Agent_So

  • Veteran Member
  • ****
Re: san po ung nagpapowder coat?
« Reply #34 on: November 05, 2006, 02:25:11 PM »
mga sir kung may alam rin kayo near cavite... gusto ko pa powder coat mga stand ng cymbals ko.. bagay kaya puro itim?? hehehe. kalawangin na kasi yung crome.. para less maintenace....
Solemn Harmony Studio
Blk-1, Lot-7, Diamond St., Silverhomes Classic, Perpetual Village 7, Bacoor, Cavite. CELL: 0915-492-2800 (Premier,Peavey,Hartke,Mackie,JBL,Shure,DBX,Zoom)

Offline drumster

  • Board Moderator
  • *****
Re: san po ung nagpapowder coat?
« Reply #35 on: November 05, 2006, 09:26:14 PM »
You can check out these Pinoydrums threads which discusses/ed powder coating...

Chrome Hardware vs. Black Hardware
http://talk.philmusic.com/board/index.php/topic,25224.0.html

san po nakakabili ng paint for drums?
http://talk.philmusic.com/board/index.php/topic,28283.0.html

Lets see those sets! (sticky topic)
http://talk.philmusic.com/board/index.php/topic,17360.0.html


 8-)

Offline eisenworx

  • Netizen Level
  • **
Re: san po ung nagpapowder coat?
« Reply #36 on: December 05, 2006, 10:17:51 PM »
sir hanapin mo sa directory un republic powdercoating co. i think may 5 outlet cla, paranaque, caloocan 2 s q.c at meron din sa pampangga choose n lang kung san malapit, ok dun sobrang durable un mga coating nila khit s chrome plated pero pang metal, alloy lng un
This is the place to be...

Offline killuaxp

  • Senior Member
  • ***
Re: san po ung nagpapowder coat?
« Reply #37 on: December 06, 2006, 01:47:25 AM »
uy salamat men! balak ko pa naman papowder coat yung hardware ko :lol:

Offline BiliBidboy

  • Forum Fanatic
  • ****
Re: san po ung nagpapowder coat?
« Reply #38 on: December 06, 2006, 10:03:34 AM »
ser, san po exact location ng republic sa paranaque? i heard its sumwer in sucat...does anybody know? thanks :-D
X-DW user...SPAUN convert!

Offline peeves24

  • Philmusicus Addictus
  • *****
Re: san po ung nagpapowder coat?
« Reply #39 on: December 06, 2006, 10:10:31 AM »
wait mo lang si sir peeves.
siya ang idol ko sa mga ganyang bagay eh.
:D

demn, i missed this thread, didnt even knew it existed

your best source of info for powder coating is the YELLOW PAGES yes its old and out dated but it does contain address and phone numbers that you cant find on the net. that's a guarantee

Offline fouljan

  • Senior Member
  • ***
Re: Hardware Finishes thread
« Reply #40 on: May 26, 2007, 12:55:44 PM »
etu... powder coat din yung mga hoops.... dun din sa versa... tip din ni sir peeves.. hehe..


Offline royalletones

  • Forum Fanatic
  • ****
Re: Hardware Finishes thread
« Reply #41 on: May 26, 2007, 03:58:55 PM »
mga Sir, san kayo sa quezon city nagpa-poweder coating? exact address and tel# please. thanks
successful deal via meetups/shipping: rasta_gopz, Blood_saves, nuthead, yekoz, nuthead, beepbeep, akgm52192, ivanovich05, wipeout, mr.diddle, wax_static, sandythedrummer, peeves24, vhinming, shotsofredmist, zildjian07, jejunaidrmmr, thegreatone, markcasq

Offline behave_blue

  • Senior Member
  • ***
Re: Hardware Finishes thread
« Reply #42 on: May 27, 2007, 09:04:39 PM »
saan nga sa sucat yung republic powdercaoting? salamat :-D

Offline acousticpro

  • Philmusicus Noobitus
  • *
Re: Hardware Finishes thread
« Reply #43 on: May 28, 2007, 01:34:15 AM »
question lang po regarding powder coating.
hindi ba sya madali mag chip off lalo na sa snare
pag nag ririmshots?

or kung mag katamaan yun mga toms while nag seset-up, very rare namana mangyari
pero hindi maiwasan minsan na magkabangga yun mga rims lalo na pag ligpitan na.

Offline Akira JUMBO

  • good vibrations
  • Moderator
  • *****
Re: Hardware Finishes thread
« Reply #44 on: May 28, 2007, 01:59:47 AM »
question lang po regarding powder coating.
hindi ba sya madali mag chip off lalo na sa snare
pag nag ririmshots?

or kung mag katamaan yun mga toms while nag seset-up, very rare namana mangyari
pero hindi maiwasan minsan na magkabangga yun mga rims lalo na pag ligpitan na.

Powder coating does not chip off that easily..especially the factory made one by the drum companys (like Pearl's black hardwares)..that is why they are widely used for that reason..but they still do have a limit.. :lol:
DRUM.ROOM drum items for sale click here

Offline peeves24

  • Philmusicus Addictus
  • *****
Re: Hardware Finishes thread
« Reply #45 on: May 28, 2007, 07:57:44 AM »
mga Sir, san kayo sa quezon city nagpa-poweder coating? exact address and tel# please. thanks
saan nga sa sucat yung republic powdercaoting? salamat :-D

check the yellow pages (hindi google, yung book na makapal sa tabi ng telepono nyo)

or eyp.com.ph

question lang po regarding powder coating.
hindi ba sya madali mag chip off lalo na sa snare
pag nag ririmshots?

or kung mag katamaan yun mga toms while nag seset-up, very rare namana mangyari
pero hindi maiwasan minsan na magkabangga yun mga rims lalo na pag ligpitan na.

nope. wala pang nagchip off sa mga snare/tom hoops ko for almost 2 years na pero may mga blemish syempre

Offline wax_static

  • Veteran Member
  • ****
Re: Hardware Finishes thread
« Reply #46 on: May 28, 2007, 08:38:21 AM »
baka makatulong ito mga sir...  :-P

from EYP...

COLOURS COATING INCORPORATED
116 Sauyo Road 1100 Quezon City
9300251
Primary Category: Powder Coatings
   
   
 

DYSON SURFACE COATING CORPORATION
14 Golden Road Caloocan Industrial Subd. Caybiga1400 Caloocan
9374016
Primary Category: Powder Coatings
Inquire by email  · Inquire by fax  ·
   
   
 

ICON METAL INDUSTRIES
576 Katarungan Street Plain View 1550 Mandaluyong
5328434
Primary Category: Powder Coatings
Inquire by email  ·  View Map
   
   
 

PHILCO METAL PHILIPPINES INCORPORATED
147 Santo Domingo Street 1100 Quezon City
3638797
Primary Category: Powder Coatings
Inquire by email  · Inquire by fax  ·
   
   
 

VERSA POWDER COATING, INCORPORATED
189 Haig Street Barangay Daang Bakal 1550 Mandaluyong
5316273
Primary Category: Powder Coatings
Inquire by email  ·


REPUBLIC POWDERCOAT CORPORATION
90 Congressional Avenue 1100 Quezon City
9263609
Primary Category: Powder Coating-Contractors
« Last Edit: May 28, 2007, 08:43:27 AM by wax_static »

Offline behave_blue

  • Senior Member
  • ***
Re: Hardware Finishes thread
« Reply #47 on: May 28, 2007, 11:19:16 AM »
thanks po sir waxstatic for the detailed info :-D

Offline acousticpro

  • Philmusicus Noobitus
  • *
Re: Hardware Finishes thread
« Reply #48 on: May 29, 2007, 11:55:03 PM »
question lang po regarding powder coating.
hindi ba sya madali mag chip off lalo na sa snare
pag nag ririmshots?

or kung mag katamaan yun mga toms while nag seset-up, very rare namana mangyari
pero hindi maiwasan minsan na magkabangga yun mga rims lalo na pag ligpitan na.

Powder coating does not chip off that easily..especially the factory made one by the drum companys (like Pearl's black hardwares)..that is why they are widely used for that reason..but they still do have a limit.. :lol:

one more thing, plan ko ipa powder coat yun mga luma kong hoops pero not that old. may rust na in some parts but not that bad kaya i sprayed it with pylox chrome finish but walang kwenta ang kinalabasan. parang silver paint lang.

question. before ko dalin sa powder coating shop kelangan ko bang tanggalin yun silver with the use of paint remover?
and pano naman yun lumang chrome plate? kakapit ba ng mabuti yun powder coat?

thanks po.

Offline peeves24

  • Philmusicus Addictus
  • *****
Re: Hardware Finishes thread
« Reply #49 on: May 30, 2007, 08:39:52 AM »
strip mo muna yung silver paint mo

tapos lihahin mo ng makinis yung hoop. punasan mo ng maigi para malinis na malinis bago mo dalin sa powder coat

kakapit na yun ng ganun