Author Topic: ZOOM USERS THREAD: Share your experiences, patches, etc. here! (Read 1150273 times)

Super BisDak · « **Reply #1150 on:** September 29, 2008, 08:49:34 AM »

Quote from: kell on September 29, 2008, 04:10:07 AM

Hello G7 or G9 users!

penge naman ng tips and patches jan.

I can't create my tone 'cuz i still don't have an amp to play with.
so i'll just copy your settings then tweak them a bit.

thanks in advance!

here's a good site.

rad_12 · « **Reply #1151 on:** September 29, 2008, 10:43:06 AM »

Quote from: icemuzic on September 28, 2008, 10:00:34 AM

pwede..back to factory default...

hold mo yung store button ng zoom pedal mo then lalaba "AL" na nagbli-blink click mo ulit reset na yung mga patches mo pero take note lahat ng settings na ginawa mo mawawala.

paranoid · « **Reply #1152 on:** September 29, 2008, 01:25:57 PM »

Mahal naman ng MIDI cable for G7...

hiromi_777a · « **Reply #1153 on:** September 29, 2008, 03:40:45 PM »

@kell - Salamat Bro!

Medyo malayo lang ako sa Cubao. Sa south ako sa may parañaque. Ang mahal pala ng MIDI cable. Meron bang mas mura?

@Super BisDak - Thanks sa info Bro!

Pwde mag-add ng question. Sorry kung madami akong tanong. If I can control up to 4 control targets simultaneously, pwede ba i-off yung isang control target lang or it's just either "all-on or all-off"? (During Play)

yahoo! · « **Reply #1154 on:** September 29, 2008, 06:19:46 PM »

san nio ginagamit un midi cable??

paranoid · « **Reply #1155 on:** September 29, 2008, 06:59:50 PM »

Recording, editing patches and updating system version.

dalandan · « **Reply #1156 on:** September 29, 2008, 07:33:25 PM »

medyo ot experience:

namatay na lang yung zoom g2 ng bandmate ko.

tapos madaling masira yung switches. hindi naman siya malaking guy. average lang. may topak na yung switches after a year.

yahoo! · « **Reply #1157 on:** September 29, 2008, 07:39:15 PM »

Quote from: paranoid on September 29, 2008, 06:59:50 PM

Recording, editing patches and updating system version.

anu ba mas ok un usb or midi cable??

paranoid · « **Reply #1158 on:** September 29, 2008, 07:41:32 PM »

Quote from: yahoo! on September 29, 2008, 07:39:15 PM

anu ba mas ok un usb or midi cable??

Pag midi kasi, notes ang nattransfer sa pc. So mas precise at mas malinaw ang midi. Kung recording lang naman ok na yung usb. Pero kung mag uupdate ka ng system version, kailangan mo ng midi.

tinnitimie26 · « **Reply #1159 on:** September 29, 2008, 07:47:02 PM »

Quote from: dalandan on September 29, 2008, 07:33:25 PM

medyo ot experience:

namatay na lang yung zoom g2 ng bandmate ko.

tapos madaling masira yung switches. hindi naman siya malaking guy. average lang. may topak na yung switches after a year.

yun nga lang downside ng zoom pedal ngayon..

yahoo! · « **Reply #1160 on:** September 29, 2008, 07:49:59 PM »

Quote from: paranoid on September 29, 2008, 07:41:32 PM

Pag midi kasi, notes ang nattransfer sa pc. So mas precise at mas malinaw ang midi. Kung recording lang naman ok na yung usb. Pero kung mag uupdate ka ng system version, kailangan mo ng midi.

thanks!

dullFingers · « **Reply #1161 on:** September 29, 2008, 10:24:33 PM »

singit lang. baka may zoom tri metal for sale kayo dyan

Super BisDak · « **Reply #1162 on:** September 30, 2008, 08:38:51 AM »

Quote from: hiromi_777a on September 29, 2008, 03:40:45 PM

@Super BisDak - Thanks sa info Bro! Pwde mag-add ng question. Sorry kung madami akong tanong. If I can control up to 4 control targets simultaneously, pwede ba i-off yung isang control target lang or it's just either "all-on or all-off"? (During Play)

Yes, you can turn off the other parameters as well. let say, you want to control the channel A gain and chorus depth simultaneously. Hence, you will assign it like this: P1V1= Chan A gain, P1V2= cho depth, P1V3=0, P1V4=0

redjaztin · « **Reply #1163 on:** September 30, 2008, 08:45:29 AM »

Ako mga 2 years na tong Zoom G7 ko...wala pa naman problema...Nagka 505,708,506, 508, A2,GFX4, G2.1ut at G1 na ako...pero isa lang yung nasira ng natural yung 506...kasi yung 508 naihian ng aso kaya nasira nung sinaksak...basa pala...hehehe...di napansin ng bahista namin. So far wala naman akong naging problema sa iba. Yung G1 ko lang ngayon nag-lu-loose yung adaptor.

Very happy naman ako sa G7 ko.

ghostalker · « **Reply #1164 on:** September 30, 2008, 08:54:10 AM »

Quote from: redjaztin on September 30, 2008, 08:45:29 AM

Ako mga 2 years na tong Zoom G7 ko...wala pa naman problema...Nagka 505,708,506, 508, A2,GFX4, G2.1ut at G1 na ako...pero isa lang yung nasira ng natural yung 506...kasi yung 508 naihian ng aso kaya nasira nung sinaksak...basa pala...hehehe...di napansin ng bahista namin. So far wala naman akong naging problema sa iba. Yung G1 ko lang ngayon nag-lu-loose yung adaptor.

Very happy naman ako sa G7 ko.

haha natawa ako dun sa naihian ng aso.

@topic
yung G2 ko matibay naman talagang walang problem.

Sa mga nag-chain ng Zoom w/ analog pedals, san pwesto ng zoom multi nyo?
• sa dulo ng chain, before amp?
• sa start, right after guitar?

Sa akin kasi sa dulom then naka-off yung compressor.

jmwreck · « **Reply #1165 on:** September 30, 2008, 09:12:39 AM »

Quote from: ghostalker on September 30, 2008, 08:54:10 AM

haha natawa ako dun sa naihian ng aso.

@topic
yung G2 ko matibay naman talagang walang problem.

Sa mga nag-chain ng Zoom w/ analog pedals, san pwesto ng zoom multi nyo?
• sa dulo ng chain, before amp?
• sa start, right after guitar?

Sa akin kasi sa dulom then naka-off yung compressor.

same here, dulo ung zoom multi ko, coz i use it as a reverb and some delays...

redjaztin · « **Reply #1166 on:** September 30, 2008, 09:15:00 AM »

maganda talaga sa dulo para walang tone suck (tama ba spelling?) hehehe....

barneykols · « **Reply #1167 on:** September 30, 2008, 03:27:58 PM »

sa dulo ko rin nilagay yung zoom g1x ko. pretty satisfied with what i am getting from it.

hiromi_777a · « **Reply #1168 on:** September 30, 2008, 04:24:05 PM »

@Super BisDak - Thanks Bro.

jmwreck · « **Reply #1169 on:** September 30, 2008, 04:42:35 PM »

practically speaking, maraming compression, dirt, distortion, eq, gates, & modulation pedals na affordable, ung delay at reverb lang talaga ang mahal, hirap pa hanapin.. so zoom ung substitute for that...

Quote from: redjaztin on September 30, 2008, 09:15:00 AM

maganda talaga sa dulo para walang tone suck (tama ba spelling?) hehehe....

tama bro... approve ako jan, mawala yung tone sucking ng zoom pag nasa dulo, hehehe

Brycekenshin · « **Reply #1170 on:** September 30, 2008, 06:07:52 PM »

Hi guys anyone still using Zoom 4040, sensiya na guys ANTIGO yung ZOOM, ko

ghostalker · « **Reply #1171 on:** September 30, 2008, 07:01:20 PM »

salamat sa mga nagbigay ng opinion.

sino na dito nagpa-mod kay Sir Ricabb?

kell · « **Reply #1172 on:** September 30, 2008, 08:42:41 PM »

Quote from: Brycekenshin on September 30, 2008, 06:07:52 PM

Hi guys anyone still using Zoom 4040, sensiya na guys ANTIGO yung ZOOM, ko

ayus! still using my 3030 even though meron nkong G7.1. hehehe.

pa try naman ng patch mo dude, convert ko nalang para magamit ko sa 3030.

Thanks man!

Brycekenshin · « **Reply #1173 on:** October 02, 2008, 09:19:49 AM »

Quote from: kell on September 30, 2008, 08:42:41 PM

ayus! still using my 3030 even though meron nkong G7.1. hehehe.

pa try naman ng patch mo dude, convert ko nalang para magamit ko sa 3030.

Thanks man!

Pre sent you a PM

hiromi_777a · « **Reply #1174 on:** October 02, 2008, 09:55:24 PM »

Question about Zoom G9.2tt:

May paraan ba para mabilis makapagset ng delay time? Natatagalan kasi ako if gusto ko mag set ng 2850ms when my current setting is at 300ms, ang layo ng i-scroll ko. Is there any other way para mag set nito? Para mas mabilis and para hindi naman malaspag yung knob ko.

Hope there's someone who could help me. TIA po.

News:

Author Topic: ZOOM USERS THREAD: Share your experiences, patches, etc. here! (Read 1150273 times)