TALK @ PhilMusic.com - The Online Home of the Pinoy Musician
The Musician Forums => Music Technology & Pro Audio => Topic started by: bunny rabbit on March 21, 2006, 04:46:35 PM
-
help! di ko marinig yung guitar ko or yung nirecord ko. ginawa ko naman lahat ng nasa manual. please, tulungan nyo ko. thanks!
-
Double post... I responded to your Guitar Central thread.
-
thanks for replying. di ko pa nattry kasi la pa ko sa bahay. magiging parang monitor ba yung speakers ng pc? post ka naman ng screenshots kung pwede. thanks a lot! :D
-
Screenshot? Like this?
(http://i15.photobucket.com/albums/a374/kitcoronel/Cubase.jpg)
Cubase SL2 gamit ko.
-
thanks. pero may screen ka ba kung san malalaman yung inputs? i.e. guitar. di ko kasi alam kung ano dapat nakalagay dun eh. thanks bro!
-
Sorry, dude. Guitar inputs are a function of your sound card/interface. Cubase doesn't care about the instruments you connect to your soundcard's inputs; you can only define the input busses as mono or stereo. You have to assign inputs according to how your soundcard routes audio. You can define the inputs in Devices > Device Setup > VST Multitrack and/or VST Inputs. You have to setup Cubase to use asio drivers because that is where it works best.
-
did you arm your tracks? if you didnt then its still possible to see the record button light up without any waveform being drawn or recorded on the track (hence no sound). kung merong waveform at wala paring tunog then it's possible you're monitoring through the wrong outputs.
Kit is right, inputs and outputs are determined by your soundcard/audio interface. at the left most portion of your screen you will see the details about the selected track, where the input is coming from, and where it is going. make sure you are hooked up to the correct channel. also, if you are using something like TotalMix (a mixer software that came along with your audio interface, make sure that you have chosen the correct outputs there, and that you have properly routed your signals).
ngapala, under devices go to VST CONNECTIONS, then click on "Add Bus" to configure you uotputs and inputs in case they weren't automatically configured.
Hope this helps.
hope this helps.
-
i'm using it though my zoom g2.1. i followed the manual precisely. di ko lang talaga marinig yung guitar ko saka yung recorded stuff.
-
In the Track Inspector at the left side of Cubase, there is a button that looks like a cross section of a speaker and it glows orange when you press it. This is called the Monitor button and it's usually to the right of the red "Record" button.
Also, in VST Multitrack, see if there is a "Direct Monitoring" checkbox. Make sure its checked then try recording again.
-
the green meters are working when i strum my guitar. di ko lang talaga marinig.
(http://i15.photobucket.com/albums/a390/repez/de18774b.jpg)
di ko macheck direct monitoring eh..
(http://i15.photobucket.com/albums/a390/repez/cubase2.jpg)
di ko rin pala marinig yung metronome.
ano kaya problema nito? btw, thanks for trying to help. i appreciate it. :D
-
How are you monitoring? Thru the computer's speakers?
Since the Zoom is the main audio device, the audio output is now going thru the Zoom's headphone outs. I forgot to mention that you can only have one asio device active at any one time. If you want to use your computer monitors, use a 1/4" male stereo to 1/8" female stereo converter jack - usually available in most electronics stores.
-
ohhh... i get it now... i'll try it tomorrow. thanks so much bro! i am forever grateful.. :D
-
ako din im new to this. i was pretty confused to begin with. Kit, bakit sakin i don't have to press the monitor button to hear the output? Is that Asio Direct Monitoring in action?
thanks.
-
ako din im new to this. i was pretty confused to begin with. Kit, bakit sakin i don't have to press the monitor button to hear the output? Is that Asio Direct Monitoring in action?
thanks.
Hazel,
Yes, it is Asio Direct Monitoring. The RME does direct hardware monitoring bypassing the need for monitoring in software. The problem with software monitoring is usually latency.