hulika

Author Topic: pls help po!!  (Read 1721 times)

Offline ERIC.DRAVEN

  • Senior Member
  • ***
pls help po!!
« on: September 18, 2008, 04:20:20 PM »
mga sir/mam ano po ba yung bad bios checksum..anu po gagawin ko kasi anytime bukas ko yung isa ko pc may lumalabas ganyan..panu po pagtrouble shoot..pls help naman po kung may alam kayo..salamat po

Offline moogerfooger

  • Senior Member
  • ***
Re: pls help po!!
« Reply #1 on: September 18, 2008, 04:30:15 PM »
minsan pag ganyan..may tama na ang memory.

or.. CMOS settings. load mo lang default settings
« Last Edit: September 18, 2008, 10:44:43 PM by moogerfooger »
"The spaces between your fingers were created so that another's could fill them in."

"NEVER FROWN BECAUSE YOU NEVER KNOW WHO MIGHT BE FALLING IN LOVE WITH YOUR SMILE"

Offline thr3ten

  • Philmusicus Addictus
  • *****
Re: pls help po!!
« Reply #2 on: September 18, 2008, 07:48:55 PM »
actually google bios checksum error and it will give you tons of possible answers.  could be a component on your mobo is failing.  consider replacing the board if you can spare some.
Pulling Teeth!

Offline electronictokwa

  • Philmusicus Addictus
  • *****
Re: pls help po!!
« Reply #3 on: September 18, 2008, 09:54:55 PM »
Try mo muna remove ang CMOS (unplug mo power connecter from the MOBO before doing this, there should be no power supplied to the MOBO while doing this) for 5 seconds, then lagay mo uli. Kung automatic sa floppy siya mag boot, download ka ng BIOS fix, search mo sa google yung brand ng MOBO mo then kuha ka latest version, then load mo sa floppy disk, then load mo ang floppy disk while the computer is booting.

Try mo lang, pag ayaw talaga, unfortunately, you need to thrash your MOBO.

Offline ERIC.DRAVEN

  • Senior Member
  • ***
Re: pls help po!!
« Reply #4 on: September 19, 2008, 06:58:43 AM »
tnx po sa mga tips nyo mga sir..godbless po


Offline panterica

  • Board Moderator
  • *****
Re: pls help po!!
« Reply #5 on: September 20, 2008, 04:15:04 PM »
Try mo muna remove ang CMOS (unplug mo power connecter from the MOBO before doing this, there should be no power supplied to the MOBO while doing this) for 5 seconds, then lagay mo uli. Kung automatic sa floppy siya mag boot, download ka ng BIOS fix, search mo sa google yung brand ng MOBO mo then kuha ka latest version, then load mo sa floppy disk, then load mo ang floppy disk while the computer is booting.

Try mo lang, pag ayaw talaga, unfortunately, you need to thrash your MOBO.

fyi, cmos/bios is powered by cmos battery.

best thing to do (kung hindi ka pa familiar sa components ng mboard) is to download the manual, look for the cmos jumper, i-reset mo lang, yung jumpers nya, yun. try mo rin alisin muna yung cmos battery before you reset the jumpers (by shorting pins 2-3, there should be 3 pins), then ibalik mo yung battery.
I know you would say that at for the record di mo ako kilala ROOKIEBOY. Tinawag kitang rookie at di lahat, IKAW LANG GET IT. Hanggang dyan ka na lang....puro cheap shots - Pallas

"Good artists copy, great artists steal"