hulika

Author Topic: snare drum project. updated. 5.1.2010 :)  (Read 5574 times)

Offline g0d5_g1ft

  • Forum Fanatic
  • ****
Re: snare drum project. updated. 5.1.2010 :)
« Reply #25 on: May 11, 2010, 08:32:30 PM »
IIRC vinyl wrap yung ginamit niya sa snare.. AFAIK anything covering the shell whether wrap or paint etc would affect the sound of the shell. much like powdercoated steel shells or wrapped wood shells, there's a certain warmth sa sound na sometimes good, sometimes not.. :lol:

agree... pero the vinyl wrap you get in ace is so thin, i doubt merong malaking effect sa sound yun.

The inside of the drum is painted red, thin coat lang para lang hindi kulay kahoy.

I didnt drill any of the holes nga pala sa snare, I carved it, spiniing a knife around until kumasya yung screw, this gave me a tighter lock sa mga hardware...
matututo kaya ako magdrums? kelan kaya iyon...

need gear: http://talk.philmusic.com/board/viewtopic.php?t=28593

Offline irajames

  • Veteran Member
  • ****
Re: snare drum project. updated. 5.1.2010 :)
« Reply #26 on: May 11, 2010, 08:34:12 PM »
agree... pero the vinyl wrap you get in ace is so thin, i doubt merong malaking effect sa sound yun.

The inside of the drum is painted red, thin coat lang para lang hindi kulay kahoy.

I didnt drill any of the holes nga pala sa snare, I carved it, spiniing a knife around until kumasya yung screw, this gave me a tighter lock sa mga hardware...
bro how much score mo sa mga hardware?
Regards,
IraJames

Offline g0d5_g1ft

  • Forum Fanatic
  • ****
Re: snare drum project. updated. 5.1.2010 :)
« Reply #27 on: May 11, 2010, 08:48:11 PM »
bro how much score mo sa mga hardware?

almost 8k bro lahat ng hardware un kasama shipping sa US, tita ko na naguwi dito. bali hoops, tube lugs, tension rods, snare strainer, butt, snare wire, 2 vent holes, brass washers (50 pcs na di ko na makita kung nasaan)
matututo kaya ako magdrums? kelan kaya iyon...

need gear: http://talk.philmusic.com/board/viewtopic.php?t=28593

Offline kevzkie024

  • Senior Member
  • ***
Re: snare drum project. updated. 5.1.2010 :)
« Reply #28 on: May 14, 2010, 03:31:41 PM »
great work bro!

gumawa rin ako ng ganito two years ago, from a generic 13" tom. all hardware was ordered sa US.

share ko din if ok lang sayo para sa mga interested mag DIY ng snare.

shell:


drilled and pre-fitting:


finished:



later modified to:


snare in action:



ganda nito. sir ask ko lang kung san ka nakabili ng gantong lugs? hehe. thanks! :-)

Offline Riff_6603

  • Philmusicus Moderatus
  • Prime Moderator
  • *****
Re: snare drum project. updated. 5.1.2010 :)
« Reply #29 on: May 14, 2010, 04:42:39 PM »
Question:
ganda nito. sir ask ko lang kung san ka nakabili ng gantong lugs? hehe. thanks! :-)

Answer:
almost 8k bro lahat ng hardware un kasama shipping sa US, tita ko na naguwi dito. bali hoops, tube lugs, tension rods, snare strainer, butt, snare wire, 2 vent holes, brass washers (50 pcs na di ko na makita kung nasaan)

Cheers bro! :wink: