hulika
« previous next »
Pages: [1]   Go Down

Author Topic: hard disk unreadable  (Read 2397 times)

Offline ozborne

  • Senior Member
  • ***
hard disk unreadable
« on: September 29, 2007, 06:06:29 PM »
meron akong 2 hard disk nakakabit sa isang ide belt me time na hindi madetect yung slave. kelangan ko pang i restart para ma detect siya.  ano kaya ang problem non?
Logged
"one is too many a thousand is not enough"

Offline MEGADENZ

  • Senior Member
  • ***
Re: hard disk unreadable
« Reply #1 on: October 01, 2007, 07:58:37 AM »
Hmm .. have you checked the jumper settings ?? tpos tignan mo na din at the same time yun jumper settings nung nasa master hdd .. (kelangan ang settings nya ay master with slave o kaya para safe lagay mo sa cable select setting ..)

Isa pang possible problem is yung IDE cable wire baka naman may putol na ... try using a different IDE cable ...
Logged

Offline ozborne

  • Senior Member
  • ***
Re: hard disk unreadable
« Reply #2 on: October 02, 2007, 04:26:55 PM »
Quote from: MEGADENZ on October 01, 2007, 07:58:37 AM
Hmm .. have you checked the jumper settings ?? tpos tignan mo na din at the same time yun jumper settings nung nasa master hdd .. (kelangan ang settings nya ay master with slave o kaya para safe lagay mo sa cable select setting ..)

Isa pang possible problem is yung IDE cable wire baka naman may putol na ... try using a different IDE cable ...
  yung setting ay sure ako sa master/ slave sequence niya pero yung sa cable wire ay matagal ko nang di na check kung ok pa sya.
posible din kaya dahilan dahil puno na yung both  ide cable
Logged
"one is too many a thousand is not enough"

Offline G_CLEFT2004

  • Regular Member
  • ***
Re: hard disk unreadable
« Reply #3 on: October 03, 2007, 06:14:42 PM »
Kung ok ang jumper settings ng hard disk mo tapos
Sir pag minsan na dedetek sya tapos minsan ay hindi, try mo palitan ng cable then pag ganun pa din sure ako hard disk ang may diperensya dyan..

Nagka expirience na din ako ng ganyan kaya I know....

Logged
Walk by \"Faith\" and not by \"Sight\".. Always keep the Faith..

Offline xjepoyx

  • Philmusicus Addictus
  • *****
Re: hard disk unreadable
« Reply #4 on: October 04, 2007, 12:21:11 AM »
simple lang yan...

try getting a new set of IDE Cable. get the rounded one
Logged
good girls go to heaven. bad girls go to my room!  [/i]

Offline ozborne

  • Senior Member
  • ***
Re: hard disk unreadable
« Reply #5 on: October 04, 2007, 04:46:03 PM »
salamat sa mga suggestion subukan ko palitan yung ide cable sanan naman wag yung hard dik ang me diiprensiya kabibili ko lang noon 4 months ago.
Logged
"one is too many a thousand is not enough"

Offline Poundcake

  • GAS prophet
  • Administrator
  • ******
Re: hard disk unreadable
« Reply #6 on: October 24, 2007, 11:10:16 AM »
Tama si Jepoy. IDE cable ang problema dyan. Kung tama naman ang lagay mo sa jumpers, yun na talaga ang problema.

Here's another way: instead of respectively fixing your hard drives as master and slave, you can try to configure your using cable select instead. Naka-cable select yung jumpers ng HDDs mo then the connector, the blue tip is connected to the mobo then the connector at the other end is connected to the master drive. Yung nasa gitna is connected to the slave drive.
Logged
"The LORD will save me, and we will play my music on stringed instruments all the days of our lives, at the house of the LORD." Isaiah 38:20

Offline ozborne

  • Senior Member
  • ***
Re: hard disk unreadable
« Reply #7 on: October 25, 2007, 11:44:08 PM »
Salamat mga sir solve na ang problem ide cable ang diprensya.  Ngayon tinangal ko na din yung isang hard disk at nilipat sa isang cable para mas mabilis

OT yata ito, pero ang probelma ko ngayon yung aking isang (optical drive) combo  pwede ba siyang gawing sata ?  o kaya ay ikonek ko na lang sa isang ide to usb cable  ano ba ang mas mainam.  ty
Logged
"one is too many a thousand is not enough"
Pages: [1]   Go Up
« previous next »