connecting multiple speakers to audio interface

[nerydygirl]

okay so lets say i want to use 3 sets of different speakers for monitoring, how would i connect these 3 sets of speakers to my audio interface if my interface has only 1 set of outputs? like for example 1 monitors speakers and 1 desktop speakers then bookshelf speakers.

[skin]

If you need a switch, puede na ito.  Di mo naman siguro papatunugin sabay-sabay yung 3 sets of speakers.

[nerydygirl]

saan nakakabili nito? hehe

[Audiomaster]

saan nakakabili nito? hehe

sa raon solid electronics

[skin]

saan nakakabili nito? hehe

Sa all in one store.  CDRKing!

http://www.cdrking.com/index.php?mod=products&type=view&sid=2623&main=52

[Noisy Static]

Sa all in one store.  CDRKing!

walang kamatayan.....

[nerydygirl]

hahaha. okay salamat mga masters!

[KitC]

Looks like a simple multi-throw switch - I don't trust cdrking to incorporate a speaker protection system in that gadget. Turn down the volume when switching speakers, or make sure the speakers are off (if they're powered) before switching to them. If not, get to know a nearby re-cone specialist.

[alien_inside]

Looks like a simple multi-throw switch - I don't trust cdrking to incorporate a speaker protection system in that gadget. Turn down the volume when switching speakers, or make sure the speakers are off (if they're powered) before switching to them. If not, get to know a nearby re-cone specialist.

" LIKE "


...parang Facebook...



also " If not, get to know a nearby re-cone specialist. " = LIKE+THUMBS UP

[peeves24]

http://www.samsontech.com/products/productpage.cfm?prodID=1650

this is a little bit more fancy

[inigo]

http://www.samsontech.com/products/productpage.cfm?prodID=1650

this is a little bit more fancy

Numinipis daw ang tunog ng monitor dyan. Acceptable ba yun? (i.e., madadaan ba sa simpleng paglakas ng volume or gain, to compensate?)

[paparapakyaw]

okay so lets say i want to use 3 sets of different speakers for monitoring, how would i connect these 3 sets of speakers to my audio interface if my interface has only 1 set of outputs? like for example 1 monitors speakers and 1 desktop speakers then bookshelf speakers.

Check out the Radial MC3. It has A/B outputs, with master level control, mono switches, 2 headphone outs, Sub options, and an extra aux stereo outs. (Also, phase control for subs, and dim control)

[junig]

http://www.cdrking.com/?mod=products&type=category&subcatid=540&main=154

[KitC]

http://www.cdrking.com/?mod=products&type=category&subcatid=540&main=154

Oh God, I'm quoting myself:

Looks like a simple multi-throw switch - I don't trust cdrking to incorporate a speaker protection system in that gadget. Turn down the volume when switching speakers, or make sure the speakers are off (if they're powered) before switching to them. If not, get to know a nearby re-cone specialist.

[Xelly]

Oh God, I'm quoting myself:

LIKE uli!!!

[george_estregan]

http://www.cdrking.com/?mod=products&type=category&subcatid=540&main=154

No, this will not work. If you read TS post the need is for the single output to be sent to multiple speakers, so the device should accept a single input and have multiple outputs. Looking closely at the device, it has multiple inputs and single output, the complete opposite of what's needed.

I would suggest this instead:

http://www.smproaudio.com/index.php/en/products/monitor-controllers/mpatch2

though I don't know if its available locally. 

[nolit]

Upgrade to an audio interface with more outs.
You can also get a behringer mini amp  - its a 4 channel headphone amp but does have multiple line outs as well. This can feed to your monitors.

[MYN11]

Eto ginagamit ko:

PRESONUS MONITOR STATION


    Main volume control
    Three stereo inputs (two balanced TRS, one RCA Aux/Phono)
    Three sets of balanced TRS speaker outputs each with level adjustment
    Talkback microphone with volume control to feed headphone and cue output
    XLR input for external dynamic talkback microphone
    Accurate dual 8-segment LED for metering
    Four loud and clear headphone amplifiers with separate volume control and independent input source selection
    MAIN and CUE stereo output have independent input source selection
    DIM with variable level adjustment
    Aux and Phono level adjustment
    Mute and Mono

[Xelly]

Eto ginagamit ko:

PRESONUS MONITOR STATION


    Main volume control
    Three stereo inputs (two balanced TRS, one RCA Aux/Phono)
    Three sets of balanced TRS speaker outputs each with level adjustment
    Talkback microphone with volume control to feed headphone and cue output
    XLR input for external dynamic talkback microphone
    Accurate dual 8-segment LED for metering
    Four loud and clear headphone amplifiers with separate volume control and independent input source selection
    MAIN and CUE stereo output have independent input source selection
    DIM with variable level adjustment
    Aux and Phono level adjustment
    Mute and Mono

Drool!!!

[nolit]

SAMSON C-Control

Provides a control room matrix previously available only on consoles costing thousands.A unique solution for studios with multiple monitors, headphone mixes and tape or digital sources. Provides easy, heretofore impossible to achieve, instant monitor mixes or dubs. Select from three pairs of speakers with dim and mute. Use the talkback mic to give instructions to the musicians in the headphone mix. Push-to-talk also records slates. Includes a headphone amp with level control. Three sets of stereo ins and outs are included, with dubbing capability to three outputs.

http://www.samsontech.com/samson/products/processors/c-class/ccontrol/