combiner

[royc]

i got 2 DIs pero gusto ko isa lang ang gamitin for the keyboards to connect to the mixer, yung isa sa gitara. may nakita akong diagram for a simple combiner (stereo to mono) using 2 x 10k resistors pero preferred ko yung ready made sana. may nabibili bang ganun locally? tia!

[marlo_haboc]

i got 2 DIs pero gusto ko isa lang ang gamitin for the keyboards to connect to the mixer, yung isa sa gitara. may nakita akong diagram for a simple combiner (stereo to mono) using 2 x 10k resistors pero preferred ko yung ready made sana. may nabibili bang ganun locally? tia!

no need for that if you only use one signal as it will only be mono on the mixer to output...just  use the left mono output of your keyboard to di then balance out of di to mixer...don't complicate it para di ka malito...if you want a good sound for your keys use stereo and 2di to 2 chnl on your mixer pan left and right...

[royc]

Thanks will just use a splitter para simple. Does it have to be the left channel? Not sure if i can identify which is which

[marlo_haboc]

Thanks will just use a splitter para simple. Does it have to be the left channel? Not sure if i can identify which is which

most left output channel of a keyboard is mono if you only use one output....from yamaha, korg, roland, and other highend keys...splitter is just a waste, if you will just use one mono mixer channel, just an advice, anyway its your choice...

[royc]

Single stereo out kasi yamaha keyboards at digital drums ko can't tell ano ang left

[KitC]

exactly what kind of keys and drums are you using?

[royc]

Psr e323 and dd-55 sir

[KitC]

Try something like this:



It's a 4-channel line mixer and the output is mono so it feeds only 1 channel in the FOH board. The only problem is that you will have to set levels yourself. You can use standard 1/4" TRS to RCA (w/ RCA-to-1/4" adapter) cables with this baby.

[royc]

Tnx will check it out