1-SPOT compatibility chart (Guide)

[rogeryu]

From: Visual Sound, LLC 
http://visualsound.net/1-spot-power-supply/

1 SPOT User’s Manual and Compatibility Chart
The 1 SPOT is 9VDC (not AC), with a barrel-style output plug which is center negative.
The Converter Plugs (CL6, C35, CYR, CBAT) allow the 1 SPOT to work with other types of DC
power jacks and opposite polarity.
Will the 1 SPOT power my pedal? If your pedal can operate with a single 9V battery, yes. If the
power jack on the pedal is labeled 9VDC and uses less than 1700mA (virtually all pedals use far less
current than that), yes, the 1 SPOT can power it. Most pedals use the barrel-style power jack with
the polarity described above. For most others, one of the 1 SPOT Converter Plugs should work.
Occasionally, some pedals do not share power very well with other pedals, but this is rare. In most
cases, you can link your pedals with Multi-Plug 5 or 8 cables, having all of them sharing a 1 SPOT.


Partial Compatibility Chart:
Akai – All pedals
Aphex – All pedals
Arion – All pedals
Austone – All pedals
Boss – All pedals
Barber – All pedals
Carl Martin (all models without AC cord)
Casio Keyboards
Danelectro – All pedals
Demeter Tremulator – C35
Digitech
 X series pedals
 RP50, BP50, BP80
 RP100, BP100 – CL6
 RP200 and higher – not compatible
DOD – All pedals (older models require C35)
Dunlop –
 Crybaby Wahs
 Rotovibe
Uni-Vibe Stereo Chorus
EBS – All pedals
Electro-Harmonix –
Big Muff – C35 (USA), CBAT (Russian)
Bass Balls – C35
Holy Grail – C35 (requires separate 1 SPOT to avoid noise)
Small Clone – C35
Small Stone – C35
Holier Grail, Frequency Analyzer, MicroSynth, Q-Tron, Tube pedals – not compatible
Expandora
Frantone – All pedals (except Glacier); for pre-2002 models, use C35
Fulltone – All pedals (except 69, Soul Bender, Octafuzz – these require CYR on a separate 1 SPOT from other
“normal” pedals.)
Guyatone – All pedals
Ibanez – All pedals (some older models require C35)
Jacques – All pedals C35
Line 6 - POD – not compatible
Modeling Pedals – CL6
Tone Core Pedals – Yes, but not recommended for more than one Tone Core plus other brands of pedals
Marshall – All pedals
Maxon – All pedals
Moogerfooger – All pedals – CYR (each Moogerfooger pedal requires separate 1 SPOT to avoid noise)
Morley – All pedals
MXR – Auto Q
 EQ – not compatible
 Dime Distortion – not compatible
 Doubleshot Distortion – not compatible
 All single effects (new)
 All single effects (old) – C35
Nobels – All pedals
Peterson – StroboStomp tuners
RAT (all models C35) Rocktron – All pedals except Silver Dragon
Roger Mayer (all models; some require CBAT)
Sabine - Tuners
Seymore Duncan Pickup Booster
T-Rex – All pedals (except AC cord models)
Tubeworks – AC cord included
Voodoo Lab – All pedals
Yamaha – Keyboards, samplers, drum machines – CYR
Zoom – All pedals
ZVEX – All pedals CBA

[rogeryu]

I made this thread for those 1-spot user to help guide yon later na bibili. Also this might help you too
Post reply yon 1-spot user ng pedal na WALA sa list to update.

Thanks

[bugoy]

dati nung may 1-spot pa ako 6 yrs ago with my first pedal board, ang nakakabit are the ff with out hums all at the same time:

Behringer Acoustic Simulator
Behringer 7 band EQ
Jim Dunlop Crybaby GCB95 Wah
Korg AX30G
Ibanez TS9 later replaced by a Digitech  Bad Monkey
ProCo Turbo Rat later replaced by a BEhringer GDI21

they all had no hums or problems with the 1spot powering them all at the same time. Mine was a combo pack. and is still working now pero wala na sakin na kay Jellogz na pm user din he is using it til now

yung isa ko kabanda was using his 1spot combo pack with a bunch of boss pedals with a radial tonebone and a gcb95 wah
 

[vanhatred]

Good day mga sir. I'm planning to buy a visual sound 1 spot marami bang type nito? gusto ko sana yung walang hum at kaya ipower up yung Boss ME-70, Mooer Blade, Digitech SynthWah, BOSS SL-20  at DD3. sa tingin nyo po ba kaya ng isa lang yun or atleast dalawa? naka-powersupply po kasi ako ngayon kaso kumakaen sya ng space sa board. ayon po.

any idea po kung keri ng VS 1spot, para po ma-maximize ko yung board ko at gumaan. Thanks.

[gyrome]

Good day mga sir. I'm planning to buy a visual sound 1 spot marami bang type nito? gusto ko sana yung walang hum at kaya ipower up yung Boss ME-70, Mooer Blade, Digitech SynthWah, BOSS SL-20  at DD3. sa tingin nyo po ba kaya ng isa lang yun or atleast dalawa? naka-powersupply po kasi ako ngayon kaso kumakaen sya ng space sa board. ayon po.

any idea po kung keri ng VS 1spot, para po ma-maximize ko yung board ko at gumaan. Thanks.

kelangan mo i-isolate ang me-70. saka hindi yata 9vdc ang me-70. not sure though. hanggang 1.7ma lang ang 1spot. godlyke powerall gamit ko(2000ma). 

[ermonski]

very trusty power supply. I've been using mine for 3 years.

[vanhatred]

very trusty power supply. I've been using mine for 3 years.

Galing. ingat na ingat sa gamit. (:

kelangan mo i-isolate ang me-70. saka hindi yata 9vdc ang me-70. not sure though. hanggang 1.7ma lang ang 1spot. godlyke powerall gamit ko(2000ma). 

Gamit ko ngayun PSU 2000mAh "daw" 8 9volts tapos mabigat. may 750g-1kg yung timbang. wala naman hum na naririnig kaso nga lang malaki sya. 9volts po yung me-70. anyway thanks for giving me option. tingnan ko din yung godlyke powerall. (; hehe