« Reply #19388 on: December 10, 2015, 11:30:28 AM »
Hi, guys. Could use some help here. Basically, I've wanted to make some adjustments to the action of my RG721 at the bridge, but the problem is that the allen bolts have gotten stripped and rusty over the past couple of years I've had the guitar. The allen wrench on my Premium tool still works but it's just the bolts on the low E, A, and high E saddles that refuse to budge. Any advice? Here's a pic of the bridge for reference (open in a new tab if the pic's too small).
Babad sa WD40 overnight tapos pihit with long nose pliers. Ang importante matanggal mo muna yung magkabilang saddle para ma-wiggle yung yung iba. Bili ka rin ng replacement na allen screws.
Logged
nuno : n4 2.0 n4esa, n4vintage, n4 silver sparkle, n5, n6, n7, n8esa
etc : yjm, axis, jp6, jpxi, jp12, jp13, lp 58 vos, lp 57 ri, lp standard, lp trad, am strat, am tele deluxe, jem7v, uv777, rg prestige, j custom, deluxe reverb, vai legacy, jcm900, axefx